Package-01/2024-25/ Various electrification work in Rajhans Nursery Mount Abu (Sirohi)

Amount

Electrification work at Rajhans Nursery Mount Abu Sirohi.

LED Decorative lighting system NON BSR

P & F of IP65/66 protected LED Spot Lights for Planters with high illumination with available in quick connecting cable coupled with various mounting accessories. Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards. System Power Consumption of 8W - 12W. Light output in RGB Colour as per engineers choice. Fixtures shall be IS 10322 compliance. Make: Philips/ havells/Orient/Bajaj/Surya/Crompton.

P & F of IP65/66 protected LED Flood Lights for Saucers & Garden with available in quick connecting cable coupled with various mounting accessories. Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards. System Power Consumption of 40W - 100W. Light output in RGB Colour as per engineers choice. Fixtures shall be IS 10322 compliance. Make: Philips/ havells/Orient/Bajaj/Surya/Crompton

P&F of LED Rope light 120LED(50 Mtr) Make ;Philips/ havells/Orient/Bajaj/Surya/Crompton

P&F of MUZIRIS 3 HEAD CYLINDRICAL PENDANT MAKE : philips/wipro /bajaj /Surya /syska

Supply and installation of decorative ornamental pole with double arm bracket. Total height of the pole with double arm bracket shall be 4000 mm nominal above the ground. The pole is made out of grooved mild steel tube/GI (MS sheet of TATA / Jindal "B" Class) and cast iron base in three steps as shown in attached drawing. The MS/GI pipe shall be fixed inside from bracket to bottom base plate. The size of the base plate shall be 260X225X12 mm. Cast iron embellishments are fitted with the help of grub screws. A built in service window is provided to accommodate a 6 amp SP MCB and 32 amp heavy duty connector for mains connections in the bottom part of the pole as shown in the attached drawing. The different sections of the pole are joined together by means of welded joints. The decorative bracket is made out of mild steel, cast iron and cast aluminum. The mild steel, cast iron and cast aluminum part are joined together and are fabricated to get the desired design as per attached drawing.

The decorative bracket should have the arrangement to fix the required luminaries. The bracket should have the arrangement suitable to be fitted on the required pole. The dimensions of the pole and bracket should be as per attached drawing. The decorative pole and Double arm bracket shall be machined and polished properly to give it a smooth surface. The decorative pole with single arm bracket is duly pretreated and painted in UV ray resistant P.U. coating in approved colour shade. The coating should pass a minimum of 300 salt spray hours as per IS or ASTM testing methods. Decorative pole with single arm bracket shall be installed at desired location including foundation of the pole by making cement concrete foundation of 1:1.5:3 (1 cement : 1.5 course sand : 3 course stone aggregate 20/40 mm nominal size) with the help of anchor bolts and 20-25 mm GI sleeve as required. The grade of cast iron embellishments shall be FG- 220. Make:- Lustre illuminations, K-Lite, Homdec, Advent, Philips, Surya, Utkarsh, Aster,VSTP.

With decorative heritage type street light with system wattage of 50W having a minimum lumen output of 6250 lumen. Decorative luminaries to be made of Spun Aluminum and should have IP66 optical compartment. LEDs make of CREE/NICHIA/OSRAM/PHILIPS. A Polycarbonate Diffuser shall be fitted in the Luminaries. The Luminaries should have surge protection of 5kV with driver voltage range of 140-280 V AC. Integrated suitable LED Driver to be fitted inside the Luminaries, having efficiency > 85% and in compliance to IEC standards. The design should be considered with a minimum lux to average lux ratio greater than 0.4 and minimum to maximum lux ratio greater than 0.33 as per IS 1944 A1 category. The LED driver shall be integrated; however it should be easily replaceable, as & when required post warranty period. The warranty

period of LED driver shall be 2 years from the date of installation. System life of 50,000 burning hours with 70% of initial lumens maintained. The Luminaries body should be machined and polished properly to give it a smooth surface. The luminaries shall be suitable for the fitment on the required single/double arm bracket. The luminaries shall be duly pre-treated and painted in U.V. ray resistant polyurethane paint in approved colour shade. The coating should pass a minimum of 300 salt spray hours as per IS or

ASTM testing methods. A two way connector is provided for the mains connections. The luminaries are suitable 240 volt, single phase, AC. Decorative luminaries shall be installed at the desired location on the double arm bracket (as per enclosed drawings). LM 79 and LM 80 test reports to be provided from ETL/CETL/UL/NABL for luminaries. Make : Philips, Trilux, Kesselec Shredder, K-Lite, Lustre Illuminations, Surya, Advent, Homdec, GM Modular.

Supply and installation of decorative ornamental pole with single arm bracket. Total height of the pole with single arm bracket shall be 4000 mm nominal above the ground. The pole is made out of grooved mild steel tube/GI (MS sheet of TATA / Jindal "B" Class) and cast iron base in three steps as shown in attached drawing. The MS/GI pipe shall be fixed inside from bracket to bottom base plate. The size of the base plate shall be 280X200X12 mm. Cast iron embellishments are fitted with the help of grub screws. A built in service window is provided to accommodate a 6 amp SP MCB and 32 amp heavy duty connector for mains connections in the bottom part of the pole as shown in the attached drawing. The different sections of the pole are joined together by means of welded joints. The decorative bracket is made out of mild steel, cast iron and cast aluminum. The mild steel, cast iron and cast aluminum part are joined together and are fabricated to get the desired design as per attached drawing.

The decorative bracket should have the arrangement to fix the required luminaries. The bracket should have the arrangement suitable to be fitted on the required pole. The dimensions of the pole and bracket should be as per attached drawing. The decorative pole and Double arm bracket shall be machined and polished properly to give it a smooth surface. The decorative pole with single arm bracket is duly pretreated and painted in UV ray resistant P.U. coating in approved colour shade. The coating should pass a minimum of 300 salt spray hours as per IS or ASTM testing methods. Decorative pole with single arm bracket shall be installed at desired location including foundation of the pole by making cement concrete foundation of 1:1.5:3 (1 cement : 1.5 course sand : 3 course stone aggregate 20/40 mm nominal size) with the help of anchor bolts and 20/25 mm GI sleeve as required. The grade of cast iron embellishments shall be FG- 220. Make:- Lustre illuminations, K-Lite, Homdec, Advent, Philips, Surya, Utkarsh, Aster,VSTP.

With decorative heritage type street light with system wattage of 50W having a minimum lumen output of 6250 lumen. Decorative luminaries to be made of Spun Aluminum and should have IP66 optical compartment. LEDs make of CREE/NICHIA/OSRAM/PHILIPS. A Polycarbonate Diffuser shall be fitted in the Luminaries. The Luminaries should have surge protection of 5kV with driver voltage range of 140-280 V AC. Integrated suitable LED Driver to be fitted inside the Luminaries, having efficiency > 85% and in compliance to IEC standards. The design should be considered with a minimum lux to average lux ratio greater than 0.4 and minimum to maximum lux ratio greater than 0.33 as per IS 1944 A1 category. The LED driver shall be integrated; however it should be easily replaceable, as & when required post warranty period. The warranty

period of LED driver shall be 2 years from the date of installation. System life of 50,000 burning hours with 70% of initial lumens maintained. The Luminaries body should be machined and polished properly to give it a smooth surface. The luminaries shall be suitable for the fitment on the required single/double arm bracket. The luminaries shall be duly pre-treated and painted in U.V. ray resistant polyurethane paint in approved colour shade. The coating should pass a minimum of 300 salt spray hours as per IS or

ASTM testing methods. A two way connector is provided for the mains connections. The luminaries are suitable 240 volt, single phase, AC. Decorative luminaries shall be installed at the desired location on the double arm bracket (as per enclosed drawings). LM 79 and LM 80 test reports to be provided from ETL/CETL/UL/NABL for luminaries. Make : Philips, Trilux, Kesselec Shredder, K-Lite, Lustre Illuminations, Surya, Advent, Homdec, GM Modular.

Non BSR Water cooler

SITC of water system with filteration stage-Participate filter -Membrane life enhancer filter-sediment filter-Pre carbon filter-RO Membrane filter Post carbon filter,Input power rating-230V AC , 50Hz ,Percentage of Rejection TDS -90% or better having following features (a) spin welded EO Membrane Housing to prevent tempering (c) Push fit components for leak proof performance (d) Fully automatic operation with auto start and auto off (e) SS/ABS construction for corrosion free lifespan (f) Equally suitable for water from all bore wells, overhead storage tanks, water tankers and even municipal taps.(g) RO Membrane Flushing-Auto Flush@Every start ,Every and every one hour of working for one minute. complete in all respect with following capcity : Purification capacity-50LPH,Duty cycle 270-500liters /day

Musical fountain

1/4" Brass Nozzles adjestables

1"Center jet

3'GI outer Ring B Class Hevay

1.5"Tulip Bass

Single Jet Arc

1.5 HP Submersible Pump Klassic ISI

RGB Led 12v 18W

RGB Controller

500Watt Amplifire (Stranger/Ahuja)

Fully Automatic control Unit

valve UPVC

Electrical wiring Inside Fountain Tank

Ring Supporting Stand

Light Fixing clamp

Hardware Material

Sound Speaker(A Plus)

Installation Labour

Manufacturing Labour

CCTV installation work on Entrace of Rajhans Nursery Mount Abu

SITC of IP 67, IK 10, full HD, 20-60 fps, 5MP IR Fixed-focal Bullet Network Camera, 1/2.7" CMOS image sensor, 5MP (2592 × 1944) H.265 codec, Built-in IR distance 50 meter or better, ROI, SMART H.264 +/H.265+, AI H.264/H.265, ROM 128MB, RAM 512MB, Min. Illumination: 0.005 [email protected] (Color, 30 IRE), 0.0005 [email protected] (B/W, 30 IRE), Rotation mode, 120 db WDR, 3D NR, HLC, BLC, Intelligent monitoring: Intrusion, tripwire, support the classification and accurate detection of vehicle and human, abandoned object, missing object, loitering detection, people gathering, parking detection, heat map and face detection with casing, Abnormality detection: Motion detection, supports max. 256 G Micro SD card, 12 VDC/PoE power supply, IP67 protection, CE, FCC, UL, BIS, certification, Operating Temperature –40 °C to +60 °C, with OEM authorisation and Apporoved Make: Honeywell, Dahua, Bosch, Axis Only.

Supply, Installation, Testing and Commissioning of Customer Premises Equipment(CPE) with supported accessories Like Stand, Mounting kit, DC and RJ45 Connector, LAN and Electrical Cables etc. complete in all respect Mounting on Existing PCC/Tubular Poles. as required by Engineer-incharge for feeding required CCTV Camera links.

* Antenna type: Integrated dual-polarized antenna * Wired interface:10/100/1000 Base-T, RJ45 * Surge Protection: Built In * Operating modes: Bridge, Router * WAN: Static IP, DHCP client, PPPoE client * NAT: Routing w/ or w/o NAT * Static routing: Supported * DHCP: Client, Server, Relay * Port forwarding: Supported * VLAN: Supported for management and data * System configuration: User-friendly web GUI, Command line via SSH centralized Wireless Network Management System, reset via reset tool * System monitoring: SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap

* Power supply: 12 - 24 V DC passive Power over Ethernet(POE) * Power source: 100V – 240V AC via included adapter * Power consumption: 15 W * Enclosure: IP67 * Make [any one of the specified]:Motorola/ WISNETWORK/ Engenius/ TPLink/Tenda/ CISCO/ALCATEL

GANPATI COMMUNICATION SERVICES

M/S Goyal Electricals

Jain Trading Company

M/S Goyal Electricals