Loading…
Loading…
Tender Value
₹50.3 L
EMD Value
₹1.0 L
Closing Date
5 Oct 2026, 2:00 pm
The Executive Engineer,Howrah Division,PHE Dte.
43 N.S. ROAD, SUSAMA MANSION (4th Floor) HOWRAH - 711101
Additional laying of pipeline at different habitations under the command area of Harop (Zone-II) PWSS of Bagnan-I block under Uluberia Sub-Division of Howrah Division, PHE Dte. (Location- Agunshi Bhunera Purnal)
2026_PHED_5073900_4
WBPHED/EE/HD/NIeT-10 OF 2026-27
Open Tender
CIVIL WORKS
Fixed-rate
60 days
Howrah
Please refer Tender documents.
7 documents required · 7 mandatory
₹1.0 L
21 Sept 2026
21 Sept 2026
7 Oct 2026
21 Sept 2026
5 Oct 2026
21 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying HDPE (Materials grade PE-100) pipes conforming to IS 4984- 1995 with latest revision & amendments if any with necessary HDPE specials (excluding cost of CIDF valves) including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder,road sub-grade and aits flank but excluding moorum laterite or sand stone / hard rock cutting with chisel required including cutting road flank/ brick pavement etc. without damaging the exisiting telephone/electrical cable line etc.(in case of damage of any type of cable line by the agency at the time of execution necessary damage charge as applicable by the respective authority will have to be brone by the agency at his own cost)upto the depth (av.) so as to maintain 1.10m.earth cushion from top of the pipe upto G.L. including loading unloading carrying lowering laying fitting fixing carefully pipes, valves and specials with the all types of jointing materials in trenches maintaining proper levels and alignment jointing the pipes and specials by butt welding/ adopting suitable method (But weld jointing with help of hydraulic tack and trimming machines, Hitter etc. for reaching at necessary melting point of HDPE pipe so that joint can be monolithic) so as to facilitate the maintenance of pipe line locally as per conventional method in future.(A) Pressure Rating : PN 6 (ii) Laying of pipe line including cost of pipe & fittings / specials but excluding cost of vlaves 75mm(OD) | 276 | Mtr. | 252 | ₹69,552 |
| 1.01 | 90mm(OD) | 752 | Mtr. | 331 | ₹2,48,912 |
| 1.02 | 110mm(OD) | 1,300 | Mtr. | 454 | ₹5,90,200 |
| 1.03 | 125mm(OD) | 696 | Mtr. | 590 | ₹4,10,640 |
| 1.04 | 140mm(OD) | 1,100 | Mtr. | 722 | ₹7,94,200 |
| 1.05 | 160mm(OD) | 480 | Mtr. | 911 | ₹4,37,280 |
| 2 | Carrying Cl/DI pipes with specials and valves and lowering placing in position and laying carefully inside the trenches in proper alignment and gradient etc. including earth work in excavation of adequate width as per specification having min. clear cover from top of pipe is 1.10mtr. below existing ground level in any kind of soil including mixed with boulder, road sub-grade and its flank,but excluding moorum and laterite and stone etc.without damaging the exisiting telephone/electric cable etc.(in case of damaged if any type of cable line during excecution , necessary damaged charges as applicable by the respective authority will be borne by the agency in his own cost) preparing the bottom surface for continuous bedding of pipe line and laying pipes, fitting, fixing specials and valves with bailing out water if any including carriage of pipes, specials and valves from local deptt. store within 8KM and back filling the trenches with excavated earth in layers to original condition as per specification and direction of EIC. The surplus materials after execution of work are to be return to the deptt. store.N.B: i) Any deviation from required clear cover of 1.10mtr., due to site adverse condition, prior permission is to be obtained from the EIC in exceptional situation and payment will be made on prorate basis over the rate of entire item
ii) No payment will be made without hydraulic test of the pipe line either part or full
iii) The pipes, specials and valves , rubber gasket will be supplied deptt. free of cost.150mm dia. | 22 | Mtr. | 112 | ₹2,464 |
| 3 | Filling the pipe line with water, testing hydraulically as per I.S 3114-1965 (Article-6) in section of a length not exceeding 500mtr. for head of pressure as per specification including supplying installing and fixing all equipments such as diesel pump set, blank flange, pressure gauge, valve, pressure pump and all other tools and plants including drilling topping and plugging of necessary holes to pipes, blocking ends providing temporary thrust block and subsequent blocking of holes and other jointing materials and dismantling and removal of the same including disposal of water etc. all complete as per specification and direction of EIC. The rate is inclusive of cost of requisite water to be arranged by the contractor (Recovery rate of water @ Rs.10.00/m3, if contractor used water from deptt. source).A) For Cl/DI pipe 150mm dia. | 22 | Mtr. | 4.2 | ₹92.4 |
| 4 | B) For UPVC/HDPE Pipe 75mm(OD) | 276 | Mtr. | 3.15 | ₹869.4 |
| 4.01 | 90mm(OD) | - | Mtr. | 3.6 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
LDSRisingmainSpecification.pdf
Tender Documents • 0.25 MB
BOQ_5158992.xls
BOQ • 0.34 MB
ImportantDocuments.pdf
Tender Documents • 0.15 MB
WBF2911.pdf
Tender Documents • 0.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .