SSP-54 Supply of spares of various pumps Make Sam Turbo installed at AHP and Guard Pond, Stg-I and III, Unit 1, 2, 5 and 6, SSTPS, Suratgarh

A.) Spares of Ash Slurry Pump Model: AR200/550 U# 1 & 2

Impeller for Ist Stage pump with nut (Clockwise direction) Part No. 18 A Material NIHARD TYPE- IV

Wear Plate (Bracket Side) (Part No.16, Material:- NIHARD TYPE- IV)

Wear Plate (Suction Side) (Part No. 19, Material NIHARD Type - IV

Lantern ring (Part No 13, Material:- ASTM A743 CF 8M)

Oil Level (Seal) Indicator Part no 54 , Material Glass with Brass

Gland Housing (Part No. 9, Material ALLoy CI)

Inner casing (Part No. 17, Material NIHARD Type -IV)

Expeller [ Part No:- 14, Material:-NIHARD TYPE-IV]

Liquid Thrower (part no.11,Material:- ASTMA216 GR WCB

Flange( Suction Cover)

Lock Nut[ Part No:- 47, Material:-ASTM A216 GR WCB ]

Impeller for IInd Stage pump with nut (Anti-Clockwise direction) (Part No. 18 B, Material:- NIHARD Type -IV)

Shaft for I st Pump with nut (Clockwise direction) Part no. :- 4, Material :- BS 970 EN8)

Brearing Spacer (Part No.7, Material :- IS 210 FG 200)

Shaft Sleeve (Part No. 12, Material ASTM A 743 CA 15)

Shaft for IInd Stage pump with nut (Anti-Clockwise direction)Part No.-4, material- BS970 EN8

Outer Bearing Cap (Part no.5 Material :- IS 210 FG 200)

Inner Bearing Cap (Part no.6 Material :- IS 210 FG 200)

Gland Ring (Part no.:- 24 Material:- ASTM A 216 Gr WCB)

Spring (Part no.:- 41, Material:- Steel)

Brearing Spacer (Part No.7A, Material :- IS 210 FG 200)

Dome Nut & T bolt

Outer casing(Bottom) & Outer casing(Top) (Part No. 15 & 20 ) Material IS 210 FG 260

Spring Plate Part no. 41 A Material :- IS 210 FG 260

Complete bearing assembly (fitted with shaft & bearing etc.) for lInd stage pump.

B.) Spares of Verticle Pump Model: VW 150/340A+ARS

Ratchet Collar Part No. 53.852, Material IS 226 C15

Circlip Part No. 94.055, Material Steel

Drive Shaft (Part No.22.352), Meterial:-AISI 316

Drive Column Pipe Part No. 72.352, Material ERW MS C Class

Pump Column Pipe Part No. 72.354, Material ERW MS C Class

Star Support(Part No.31.152,Meterial:-IS 210FG 200

Bush Bearing(Pump/Star) 2 Set consist of each 2 No.) (Part No.:- 55.552 & 55.553,Meterial:-RUB MS SLEEVE)

Impeller(Part No.24.2,Meterial:-NIHARD TYPE-IV)

Wear Plate(B.Side ) (Part No.:-14.53, Meterial:-ALLOY CI)

Wear Plate(S.Side ) (Part No.:-14.54), Meterial:-ALLOY CI

Inner Casing Part No. 11.23, Material Alloy CI

Bearing Collar Part No. 53.952, Material IS 226 C15

Bearing housing Part No.36.052Meterial:- 210 FG 200 )

Gland Housing (Part No. 46.3, material:- IS 210 FG 200)

Pump Shaft (Part No. 22.3, Material:-AISI316)

Coupling Ring, Coupling Nut & Coupling Sleeve (Part No. 87.053,87.052,87.452, Material :- AISI 316)

Ratchet Pin (Part No. 53.752), Material AISI-410

Bearing Cap with Ratchet Part No. 37.052, Material IS 210 FG 260

Lantern ring (Part No 46.10), Material:- BS 970 EN-8

Complete Pump Assembly with Motor Set, Model VW 150/340A+ARS, Discharge Cap 225 M3/Hr, Head 20 M, Size 150 x 150, RPM 1450, Input Power 30 KW, Input Voltage 415±10%, 50 Hz, Bare Pump with Base plate, Coupling, Column and Delivery Pipe, Strainer

Adjusting Screw Part No. 91.19, Material: IS 1363 MS (1 Set = 4 Nos.)

C.) Spares of Ash Slurry Pump Model: AR200/550 (04 Nos.) Unit # 5 & 6

Split Gland

Wear Plate (B. Side) 16

Wear Plate (S. Side) 19

Impeller With Nut (Clock Wise Direction With DE) 18

Lantern Ring 13

Suction Cover 21

Inner Casing 17

Shaft Sleeve

Dome Nut & T bolt

Spring

Bearing Spacer (1 Set=2 Nos)

Gland Housing 09

Bracket Side Cover 25

Complete Bearing assembly (fitted with shaft & bearing etc.)

C.) MODEL : CHC 150/500, Capacity 240 M3/Hr. (04 Nos )

Casing Cover (Part No. 17.3) Mtl. IS 210 FG 260 for Sam Make Pump Model CHC 150/500

Pump Shaft (Part No. 22.3) Mtl.AISI 410 for Sam Make Pump Model CHC 150/500

Casing Cover Plate (Part No. 17.7) Mtl. IS 210 FG 260 for Sam Make Pump Model CHC 150/500

Bearing Bed (Part No. 34.2) Mtl. IS 210 FG 200 for Sam Make Pump Model CHC 150/500

Bearing Cap (Outer) (Part No. 37.2) Mtl IS 210 FG 200 for Sam Make Pump Model CHC 150/500

Bearing Cap (Inner) (Part No. 37.3) Mtl IS 210 FG 200 for Sam Make Pump Model CHC 150/500

Impeller Nut (Part No. 93.4) Mtl AISI 316 for Sam Make Pump Model CHC 150/500

Wear Ring (Casing, Casing Cover) (Part No. 51.4 & 51.23) Mtl IS 318 Gr.2 for Sam Make Pump Model CHC 150/500

Deflector (Part No. 51.9) Mtl AISI 304 for Sam Make Pump Model CHC 150/500

Lock Nut & Lock Washer Set (Part No. 94.03 & 93.3) Mtl SAE 1018/1020/IS 513 CRCA Sheet for Sam Make Pump Model CHC 150/500

Pressure Ring (Part No. 46.9) Mtl AISI 410 for Sam Make Pump Model CHC 150/500

Shaft Sleeve (Part No. 53.6) Mtl AISI 410 for Sam Make Pump Model CHC 150/500

Complete Guard Pond Pump assy. (without motor), Model: CHC 150/500, Size: 250 × 150, Capacity: 240 m3/hr, 90 kw, Make: SAM Turbo

E.) MODEL : 13MD 80/205D (03 Nos. )

Pump Shaft-I (Part no-22.3, Material AISI-4140)