Repair/ replacement of table tops and recanning to chairs of wooden and steel furniture at Tibri Mil Stn under GE Gurdaspur.

Amount

CHAIR DINING: Removing the existing cane from chair dining (FD-1105/279) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed.

Material and labour for preparation of wooden surfaces of chair dining (FD-1105/279) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

CHAIR EASY Removing the existing cane from seat & back of the chair from chair easy (FD-1108/229) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed.

Material and labour for preparation of wooden surfaces of chair easy (FD-1108/229) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing.

SOFA SET 3/5 SEATER M&L for removing the old worn/torn out cushion from sofa set 5 seater FD-281 and tapesty cloth from seat and back of sofa and providing new cushion of 40 density cool foam of size 560 x 530x100mm thick including provision tapesty cloth of approved shade & quality (cost of tapestry cloth shall be more than Rs. 200/- per metre) all over a cover of lining cloth duly covered and stiched over the cushions complete all as directed. Make : sleepwell/curlon.

Material and labour for preparation of wooden surfaces of sofa set 5 seater FD-281 with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

CHAIR DINNING CUSHION Removing the existing unserviceable latherite cloth with cushion from chair dinning cushioned (FD/E6/MAP/10 (R) and replace the same with new latherite cloth and cushion of appropriate size of 40/32 density cool foam all as specified and as directed.

Material and labour for preparation of wooden surfaces of chair dinning cushioned (FD/E6/MAP/10 (R) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

BED PLYWOOD TOP M&L for removing unserviceable plywood from top of the bed from bed plywood top (FD-245/246) and supply and fix new top made of 12mm BWR phenol bonded commercial plywood with suitable screws all as specified and shown on drawing. Make : National/kitply/Greenply.

Material and labour for preparation of wooden surfaces of bed plywood top (FD-245/246) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE DINING 06/8 PERSON Removing the existing unserviceable top from the Table dining for 06 person and supply and fix new one to match with the existing made of 18mm thick teak face pre-laminated particles board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing FD-30(M)/273&239.

Material and labour for preparation of wooden surfaces Table dining for 06 person (FD-30(M)/273&239) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TEAPOY Removing the existing unserviceable top from the Teapoy and supply and fix new one to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing FD-382/232&278.

Material and labour for preparation of wooden surfaces of Teapoy (FD-382/232&278) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE PEG Removing the existing unserviceable top from the Table peg and supply and fix new one to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated particle board with 4mm thick teak wood beading duly french polish all as specified and shown on drawing FD-277& 236/384.

Material and labour for preparation of wooden surfaces of table peg (FD-277& 236/384) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE 900 X 600 MM WITH/ WITHOUT DRAWER Removing the existing unserviceable top from the Table 900x600mm with/ without drawer and supply and fix new one to match with the existing made of 18mm thick pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polished all as specified and shown on drawing FD-283 & 284.

Material and labour for preparation of wooden surfaces of table 900x600mm with/ without drawer (FD- 283 & 284) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE 1200 X 900 X 760MM Removing the existing unserviceable top from the Table 1200x900x760mm and supply and fix new one to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing FD-273.

Material and labour for preparation of wooden surfaces of Table 1200x900x760mm (FD-273) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

SIDE BOARD Removing the existing unserviceable door shutters (both) of side board (FD-372) and supply and fix new door shutters (both) to match with the existing, made of 18mm thick teak face Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round including all fittings and fixtures all as shown on drawing and as directed Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality) (b) Hinges shall be 50mm of approved quality.

Removing the existing unserviceable front portion of the drawer of side board (FD-372) and supply and fix new front portion of the drawer to match with the existing made out of 18mm thick teak face Pre-laminated particle board with laminated finish including new knob all as specified and shown on drawing.

Removing the exisiting unserviceable top from the side board (FD 372) and supply and fix new top to match with the existing, made out of 18mm thick teak face Pre-laminated praticle board with laminated finish duly providing 4mm thick teak wood beading all round duly french polish all as specified and as shown on drawing.

Removing the existing unserviceable plywood from sides (both) of side board (FD-372) supply and fix new 3.5mm thick one side teak face plywood on sides (both) to match with the existing all as specified and shown on drawing

Removing the existing unserviceable back of side board (FD 372) and supply and fix new back to match with the existing , made out of 6mm thick commercial ply wood all as specified and shown on drawing

Material and labour for preparation of wooden surfaces of side board (FD 372) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

TABLE WRITING Removing existing unserviceable top of the table writing (FD-249&275) and supply and fix new top to match with existing made out of 18mm thick pre-laminated particle board one side laminated finish duly providing 4mm thick teak wood beading all around duly french polish complete all as specified and shown of drawing

Removing the existing unserviceable cupboard complete of the table writing (FD-249&275) and supply and fix new cupboard complete made out of 18mm thick partical board one side teak face finish including 4mm teak wood beading on front side including fitting/fixtures complete all as specified and shwon on drawing. Note:- (a) Knob shall be aluminum anodized (dark brown chromium plated of approved size and quality). (b) Hinges shall be 50 mm of approved quality.

Material and labour for preparation of wooden surfaces of table writing (FD-249&275) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

DRESSING TABLE GENTS WITH MIRROR M & L for removing the existing unseviceable looking mirror from Dressing Table Gents with mirror (FD-230) and supply and fix new looking mirror of 5.5mm thick of appropriate size along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and shown on drawings.

Material and labour for removing the unserviceable drawers from the Dressing Table Gents with mirror (FD-230) and supply & fix new drawer made out of 12mm commercial plywood and front side made of 18mm thick prelaminated particle board one side laminated finish all as specified and shown on drawings

Material and labour for preparation of wooden surfaces Dressing Table Gents with mirror (FD-230) with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

DESK WITH SEAT (1120 X 940 X 850MM) Removing existing unserviceable top of the Desk and seat (TP) and supply and fix new top as to match with existing made out of 18mm thick WPC Laminate Sheet to match the existing and replace the broken steel part of a Desk/Seat duly welded and painted with one coat of synthetic emamel paint complete all as specified and directed by the Engr -In- Charge.

DRESSING TABLE LADIES WITH MIRROR M & L for removing the existing unseviceable looking mirror from Dressing Table Ladies with mirror (FD-251) FD/MAP/II/07 and supply and fix new looking mirror of 5.5mm thick of appropriate size along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and shown on drawings. Note : Make of Mirror should be of Modiguard/St Gobain/Atul.

Material and labour for removing the unserviceable drawers from the dressing Table Ladies with mirror (FD-251) FD/MAP/II/07 and supply & fix new drawer made out of 18mm thick prelaminated particles board one side laminated finish all as specified and shown on drawing

Material and labour for removing the unserviceable Stool Dressing with cushion from the dressing Table Ladies with mirror FD/MAP/II/07 and supply new Stool Dressing made out of 18mm thick prelaminated MDF board with cushion of 75mm thick and 40 Density cushion covered with letherite including teakwood beading of size 18mm x 6mm at bottom of board complete all as specified and shown on drawing.

Material and labour for preparation of wooden surfaces of Dressing Table Ladies with mirror (FD-251) FD/MAP/II/07 with sand/emery paper and applying french polish of approved quality all as specified and shown on drawing

Desk with seat (940mmx920mmx770mm) Removing existing unserviceable top of the Desk and seat (TP) and supply and fix new top as to match with existing made out of 18mm thick WPC Laminate Sheet duly providing 1mm thick PVC beading all around to match the existing complete all as specified and directed by the Engr -In- Charge

M&L for welding/fixing all broken joints in accordance with standard workmanship and specification compleate all as specified and directed by Engineer-in-Charge

M&L for removing the existing rust of Table 900mm x 900mm x 760mm and preparation of old painted steel sufaces by scraping with emery paper, cleaning and making the surfaces smooth and applying one coat of synthetic enamel paint black of approved quality complete all as specified and as directed.

Table dinning ORs steel (FD-165(R) Removing the existing unserviceable table top of Table dinning ORs steel (FD-165 (R)), supply and fix new top made of 18mm thick pre-laminated particle board both sides teak faced including provision of 4mm thick 1st class hardwood teak beading all around complete all as directed

Supply and fix new PVC shoe suitable to the leg of Table dinning ORs steel (FD-165 (R) after removing the unserviceable shoe.

M&L for removing the existing rust of Table dinning ORs steel and preparation of old painted steel sufaces by scraping with emery paper, cleaning and making the surfaces smooth and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.

Table office officer/clerk steel (FD-84/1003,1004) Removing the existing unserviceable lock of Table office officer/clerk steel (FD-84/1003,1004) and supply and fix new lock of 6 levers with duplicate keys including removing dents and adjustment of locking device of drawers for smooth functioning complete all as specified and as directed

Removing the existing unserviceable table top of Table office officer steel (FD-84/1003), supply and fix new top made of 18mm thick pre-laminated particle board both sides teak faced including provision of 4mm thick 1st class hardwood teak beading all around complete all as directed.

Removing the existing unserviceable table top of Table office clerk steel (FD-84)/1004 and supply & fix new top made of 18mm thick pre-laminated particle board both sides teak faced inculding provision of 4mm thick 1st class hardwood teak beading all around complete all as directed.

Supply and fix new PVC shoe suitable to the leg of Table office officer/clerk steel (FD-84/1003,1004) after removing the unserviceable shoe.

M&L for removing the existing rust of Table office officer steel (FD-84/1003 by scraping with emery paper and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.

M&L for removing the existing rust of Table office clerk steel (FD-84/1004 by scraping with emery paper and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.

Table 900mm x 600mm x 760mm with and W/O drawer (FD-1007 & 1008) Removing the existing unserviceable table top of Table 900mm x 600mm x 760mm (FD-1007/1008) and supply and fix new top made of 18mm thick pre-laminated particle board both sides teak faced including provision of 4mm thick 1st class hardwood teak beading all around complete all as directed

Supply and fix new PVC shoe suitable to the leg of Table 900 x 600 x 760mm (FD-1007/1008) after removing the unserviceable shoe.

M&L for removing the existing rust of Table 900mm x 600mm x 760mm and preparation of old painted steel sufaces by scraping with emery paper, cleaning and making the surfaces smooth and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.

Table 900mm x 900mm x 760mm (FD-1009) Removing the existing unserviceable table top of Table 900mm x 900mm x 760mm (FD-1009) and supply and fix new top made of 18mm thick pre-laminated particle board both sides teak faced including provision of 4mm thick 1st class hardwood teak beading all around complete all as directed

Supply and fix new PVC shoe suitable to the leg of Table 900 x 900 x 760mm (FD-1009) including removing the unserviceable shoe.

M&L for removing the existing rust of Table 900mm x 900mm x 760mm with emery paper and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.

Table bed side (steel) (FD/E6/MAP/15) Removing old UNSV top of Table bed side (steel) FD/E6/MAP/15 and S&F new top of 18mm thick pre-laminated BWR exterior grade particle board both sides teak faced including provision of 4mm thick 1st class hardwood teak beading all around complete all as directed

Removing old UNSV plywood from Back of table bed side steel and S&F new 6mm thick plywood 5 ply BWP grade.

Removing old UNSV telescopic channels of Table bed side steel FD/E6/MAP/15 and S&F new telescopic channels made of mild steel of 1:6 mm thick.

Removing old UNSV Handles and S&F 100 mm long powder coated non-ferrous metal alloy as approved by Engineer-in-charge

Removing old UNSV square tube of table bed side (steel) FD/E6/MAP/15 and S&F new 18mm square tube all as specified and directed.

S&F of PVC Shoe of Table bed side (steel) FD/E6/MAP/15 suitable to the leg after removing the unserviceable shoes.

M&L for removing the existing rust of Table bed side (steel) FD/E6/MAP/15 with emery paper and applying one coat of synthetic enamel paint of Black shade of approved quality complete all as specified and as directed.

Chair computer FD/E6/MAP/01) M&L for removing the existing damaged twin wheel casters from chair computer (FD/E6/MAP/01) and supply and fix new twin wheel caster duly fixed to match with the existing all as specified and as directed

M&L for Removing the existing unserviceable Shocker for Chair Computer and S&F new Shocker of superior quality as to match with the existing all as specified and as directed.

Chair verandah (FD-256) M&L for removing of existing torn out/ unserviceable plastic cane from chair verandah (FD-256), preparing steel tubular frame surfaces of chair with emery paper for painting and apply two coat of synthetic enamel paint of white colour of approved quality and recaning the chair both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour all as directed.

BED HARD STEEL (FD/E6/MAP/03) M&L for removing unserviceable plywood top from the bed hard steel and supply and fix new 12mm thick BWR phenol bonded commercial plywood 7 ply on top of the bed all as shown on drawing and as directed.

M&L for welding/fixing of all broken joints in accordance with standard workmanship and specification complete all as specified, shown on drawing and directed by Engineer-in-Charge

Table Computer Godrej (FD/E6/MAP/03) Removing old UNSV top of Table Computer FD/E6/MAP/03 and S&F new 18 mm thick prelaminated BWR paticle board exterior grade both sides teak faced including wooden beading 4 mm thick of 1st class Hardwood teak all around (dimensions as shown in drawings).

Removing old UNSV telescope channels of drawer of Table Computer FD/E6/MAP/03r and S&F new telescope channels made of mild steel of 1.25 mm thick.

Removing old UNSV knob and S&F new Brass knob 25 mm dia of shape as approved by Engineer-in-charge.

Removing old UNSV PVC rectunglar cover and S&F new PVC rectunglar cover as shown in drawings.

M&L for PVC hard buffers to legs of table all as specified and shown in drawings including removing old UNSV buffers.

Charpoy IP with Hard Top (FD/MAP-II/01) M&L for removing unserviceable plywood from Charpoy IP (FD/MAP-II/01) and supply and fix new 12 mm BWR phenol bonded commercial plywood 7 ply of over all size1980mmx 900mmx 440mm including replacement of bolts and nuts for fixing of plywood compleate all as specified and as directed by Engineer-in-Charge.

M&L for welding/fixing all broken joints in accordance with standard workmanship and specification complete all as specified and directed by Engineer-in-Charge

Notes for item No. 1 to 74: 1. Quoted rates shall be deemed to include one coat of synthetic enamel paint as per existing over one coat of red oxide primer to all replaced/ repaired mild steel parts and french polishing two or more coats on exposed surfaces including preparing the surface including a coat of wood filler on all wooden parts replaced/ repaired. 2. Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

s.v and co

om parkash and sons