Supply, Installation, Commissioning and Maintenance for a period of 01 year of Trash Boom attached with pontoon mounted conveyor system to collect and retrieve floating material from drains in Lucknow

Amount

Supply, Installation and Commissioning, Operations and Maintenance for 01 years since installation of Heavy Duty Trash Boom in Hypalon as external skin material attached to HDPE pontoon based stationary trash recovery system of frame construction in Marine Grade Aluminium, mounted with minimum 4 meter long conveyor. Specification Product type-HEAVY DUTY TRASH BOOM, Application-Long term deployment for Trash collection, Basic requirement-Operating in India 24 x 7 x 362 for at least 1 year, without any damage, Skirt material-Synthetic rubber with CSM (Hypalon) external skin, Construction type-Single process construction – Hot vulcanization of rubber with reinforcing fabrics, Section standard-length 15 meter, Boom height-Not less than 0.6 meters, Draft-Not higher than 0.35 meter, Freeboard-Not less than 0.25 meter, Colour-Yellow/Black/Red, Floatation-Bright colour floats (high abrasion), Float’s material-High Density Polyethylene floats with Ultra-violet protection and anti-oxidation inhibitors, Float attachment with-boom fabric Corrosion resistant fittings from AISI 316 stainless steel, End Connectors-ASTM, Buoyancy to weight ratio-Minimum 2:6:1, Fabric Tensile strength-Minimum 250 N/mm, Fabric Density-Minimum 4.3 Kg/m2 +/- 5%, Ballast-Hot Galvanized metal blocks.. Environment & Marine life friendly trash remover Product type-STATIONARY FLOATING TRASH SKIMMER, Application-Surface trash removal, Basic Requirements-Automatic operation, Frame construction Material-Marine Grade Aluminum ALMG 3 / EN AW-(5754), Collection capacity-Between 10.8 to 36 Tones per hour, Collection equipment-material Stainless steel honeycomb mesh belt – AISI 316, Belt speed-Variable speed 0.3 m/s to 1.0 m/s with frequency controller, Recovery method-To recover floating trash sideways (on the shore side), Waste transportation-System Elevating conveyor belts either polypropylene (PP) or oil resistant rubber, Maximum width in-any given water channel Not more than 3.5 meters including floats, Machine height above-water surface Not less than 2.2 meters, Floatation Type-High Density Polyethylene foam-filled floats, Floatation compartment-Minimum 4 airtight/watertight compartments, Buoyancy-No more than 1600 Kgs, Draft-No more than 480 mm, Power source-Electrical only – Single phase 230 V,System Protection-Minimum IP55 – weatherproof electrical components, Emergency protection-Emergency Stop at control cabinet & one for each collection belt, Location-It shall be located at convenient and easy to maintain place in the system, Ability to connect with booms at front end-YES, Connectors type-Hinge, Equipment design-Modular.