Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹20.5 L+₹1.0 L (5.18%)Rejected-Finance C O EROS PALA EAST LABAN ROAD SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹20.8 L+₹1.3 L (6.83%)Rejected-Finance PINE DALE PINE MOUNT RIDGE SHILLONG 793001 | EAST KHASI HILLS | MEGHALAYA | 793001 | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹20.9 L+₹1.4 L (7.26%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹21.0 L+₹1.5 L (7.83%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹19.4 L
EMD Value
₹38,800
Closing Date
20 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
HQ CWE Shillong, SE Falls, Shillong - 793011
PROVN OF 01 X BATH ROOM AND ALLIED WORKS AT BLDG NO BO 05 AT SHILLONG CANTT UNDER GE SHILLONG
2022_MES_549072_1
8576/SHL/E8
Open Tender
Civil Works
Item Rate
90 days
Shillong
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Shillong
₹38,800
Yes
2 Nov 2022
1 Sept 2022
21 Sept 2022
1 Sept 2022
20 Sept 2022
15 Sept 2022
Amount
Taking down shutter of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and as directed.
Taking down shutter of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as specified and as directed.
Demolition of Brickwork/solid concrete block work built in Cement mortar complete
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and as directed.
Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings complete all as specified and as directed.
Dismantling Timber scantlings 40 sqmcm and over in section in any position framed work complete all as specified and directed
S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed
S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed
Material & Labour second class hard wood in scantling clean sawn timber fixed complete all as specified and as directed.
Material & Labour Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote complete all as specified and as directed.
Material & Labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Material & Labour for insulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick PVC Insulated Panel with Single Side Prelam PVC sheet duly fitted into the wall as per specifications and drawing thickness of wall lining 25mm complete all as specified and directed.
S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification complete all as specified and as directed.
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face as per specification complete all as specified and as directed.
Material and Labour for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F 18/19 mm thick PVC block boards fixed with screws to timber frame complete all as specified and as directed
S&F 12 mm thick PVC boards fixed with screws to timber frame complete all as specified and as directed
S&F 0.90 mm thick PVC decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and as directed.
S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.
S&F brass 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.
S&F extruded fancy type Brass handle fabricated type of size 150 mm complete all as specified and as directed.
S&F extruded fancy type Brass handle fabricated type of size 100 mm complete all as specified and as directed.
S&F butt hinges 100 mm extruded brass with mild steel hinge pin bright polsihed and fixed type B-11 complete all as specified and as directed.
S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed
S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified and as directed.
S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed.
Material & Labour for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.
Material & Labour for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.
Material and Labour for Prelaminated particle board of 9 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as specified and as directed.
Material and Labour for precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded stone aggregate) complete all as specified and as directed.
Material and Labour for precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded stone aggregate) complete all as specified and as directed.
Material and Labour for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in subfloors finished even and rough without using extra cement complete all as specified and as directed.
Material & Labour for 100 mm thick cement concrete type B- 2, 1:2:4 (40mm graded stone aggregate) complete all as specified and directed.
Material & Labour for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.
Material & Labour for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 15 mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed.
All as Per Item no 37.00 here-in-above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and as directed.
M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.
Material & Labour for 16 to 18 mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab complete all as specified and as directed.
Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed.
Material & Labour for rendering 15mm thick on fair faces of brick or concrete work in CM 1:4 finished even and fair without using extra cement complete all as specified and directed.
Supply only Integral waterproofing compound
Material & Labour for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete all as specified and as directed.
Material & Labour for 12 thick seamless calcium silicate ceiling made out of 1800x1200 size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillings head with under head cutter at 200 mm centre to centre incl finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish fibre tape to provide incl two coat of putty and two coat of OBD design incl GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with GI cleat and steel expansion fasternerswith and incl ceiling section (nexc 1.20 m lenght) 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c complete all as specified and as directed.
S & F Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware
S & F Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag
S&F vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware
S&F vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39903 size 700x435x135 mm incl waste coupling of Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware
S&F Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware
S&F fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag
S&F 15 mm bore CP health Faucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag
S&F Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag
S&F Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag
S&F Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag
S&F corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag
S&F Shower Panel made of black tempered glass body with 2 ABS body massage jet and over head shower with shower arm incl hand shower with flexible hose and brass spout and glass shelf as per Jaquar cat Part No. JPL-BLK-GO842JAX or equivalent in Parryware / Prayag/ Cera
S&F in repair Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware
S&F in repair Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap complete all as specified and as directed.
S&F for 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
Material & Labour for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.
Material & Labour for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) bend 110mm dia complete all as specified and as directed
S&F PVC (SWR) bend 75mm dia complete all as specified and as directed
S&F PVC(SWR) 75mm dia vent cowls complete all as specified and as directed.
S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.
Supply and Laying Steel Water Tubing 15mm bore, Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete all as specified and as directed.
All as per Item No. 70.00, but for 20mm dia bore.
S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth.
Material & Labour for preparation of new plastered wall surafces and applying two coats with distemper oil emulsion over 1mm of wall care putty on wall complete all as specified and directed.
Material & Labour for preparation of new wall surface and applying two finishing coats of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete all as specified and as directed.
S&F venetian/ roller blinds of wooden finished material width of 50 mm and thickness of 5 mm and size as per direction of Engr-in-charge
S&F in repair 20 mm dia harrison rails, chromiun plated with wooden finished fancy type with fixing brackets stops , rollers etc all as directed and specified.
S&F in repair 20 mm dia double rod brackets stops , rollers etc wooden finished all as directed and specified.
Supply hoisting and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified and directed.
S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed.
Material & Labour 12 mm thick toughened sheet clear glass incl edges bevelled /rounded incl grinding / cutting complete with all fittings/ washers/handlesand bolts complete all as specified and directed.
Rough excavation not exceeding 1:50 m deep and getting out in soft/loose complete all as specified and as directed.
Removing excavated material exc 500m and nexc 1.5 Km depositing where directed as specified and as directed.
Demolition of stone slabs and tiles laid in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed.
Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material and Labour for hard core broken stone boulder of gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface all as specified and as directed.
Material and Labour for 100mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base finished even and rough to receive tiling all as specified and as directed.
Material and Labour for 50mm thick PCC 1:2:4 type B-2(40 mm graded stone aggregate) as in sub base finished even and rough to receive tiling all as specified and as directed.
Material and Labour for PCC (1:4:8) type D-2 (using 40mm grade stone aggregate) in foundation, filling and mass concrete all as specified and as directed.
Material and Labour for 60mm thick coloured, machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006, M-35 grade with grey cement and pigment complete all as specified and directed.
Material and Labour for Sand filling under floor including well ramming for laying of interlocking paver blocks all as specified and directed.
Material and Labour for vitrified tiles darkshade (square/rectangular) exterior tiles polished area of each tiles not exc 0.36 in floors laid over and incl 15mm thick 1:6 screed bed jointed pointed with coloured cement to match the tiles all as specified and as directed.
Material and Labour for mirror polishing on marble/granite/kota stone/stone work where ever required to give high gloss finish complete all as specified and as directed.
Material and Labour for preparation of new wall surface and Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and as directed.
Supply and fixing LED flood light 50 Watt, Green pressure die cast aluminum housing, heat resistant glass. IP65 protection, better optics for uniform distribution complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light and including suitable pcc foundation complete all as specified and as directed.
Supply and fix in repair LED Bollard in cylindrical shape with opal acrylic diffuser decorative with IP 65 protection Light 09 Watt, including connection with three core flexible copper cable and including suitable pcc foundation complete all as specified and directed.
Supply and fix MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed.
Supply and fix MCB DP, 240 volts, 40 Amps, 10KA rupturing capacity ‘C’ series complete all as specified and directed including taking down old one.
Supply and fix MCB, single pole 240 volts 5 to 32 Amps capacity fixed in DB's complete all as specified and directed.
Excavation in trenches not exceeding 1.5mtr in depth and not exc 1.5mtr in width and getting out in soft/loose soil for laying of cable etc complete all as specified and directed.
Returning, filling in trenches, spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing excavated material/ surplus soil and depositing where directed at a distance not exceeding 50mtr at a level not exceeding 1.5 mtr from starting point complete all as specified and directed.
Supply lay/spread in trenches, river sand clean including spreading levelling, punning for laying /cushioning of cables complete all as specified and as directed.
Supply lay in trenches fly ash bricks, old size sub class "B" for cable protection complete all as specified and as directed.
Supply, laying, testing & commissioning trenches, floors, fix on wall/pole, passing through pipes etc. LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs etc of size 16 Sq mm 2 core, confirming to IS specifications complete all as specified and as directed.
Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm x 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part-1 complete all as specified and as directed.
S K Construction
M/s A L Traders
M/S U.K ENTERPRISE
MS HO Shadap
Lyngdohs Construction Company And Associates
DWEL ENTERPRISE
M/s Jaiswal and Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .