Construction of Women Marketing Complex at Tamenglong District H.Q under HADP

Amount

SH : EARTH WORK

Earth work in excavation in hill cutting including disposal of excavated earth lead 50m and lift 1.5 m disposed earth to be leveled and neatly dressed. (a) Hard Shale

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Kanhaighat coarse sand:: 10 graded stone aggrt. 40mm nominal size).

(b) 1:2:4 ( 1cem : 2 Kanhaighat course sand : 4 graded stone aggrt. 20 mm nominal size)

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand: : 3 graded stone aggrt. 20mm nominal size).

RCC work in beams, suspended floors, roofs having slope upto 15 degreelandings,balconies,shelves,chajjas, lintels,bands,plain window sill,staircases and spiral staircase upto floor five level but excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand: : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including bending,binding and placing in position complete

(b) TMT bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply) (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

( c )Flat surface such as suspended floor,roofs,landing & the like ( i) floor etc upto 200mm in thickness

(d) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(e) Stair case ( excluding landing) slopping or stepped soffits including riser and strings etc.

(f)Edges of slab and breaks in floor not exceeding 1m in depth

BRICKS WORKS

2nd class (local first class) brick work in superstructure above plinth level upto 1st floor level in cement mortar 1:4(1 Cem:4Kanhaighat coarse sand:)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand:) in superstructure (a)above plinth upto 1st floor level.

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1 Cem:3Kanhaighat coarse sand:)

WOOD WORKS

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position (b) Local best quality Leihao.

Providing wood work in frame of false ceiling, partition etc. sawn & put up in position. (b) Uchan/Tairen wood.

Providing and fixing flame retardant treated timber insulation board 18 mm thick complete (treated on exposed face only ) lining with butt joining & nails (frame work & cover fillets to be measured & paid separately ).

Providing and fixing 38 mm thick panelled and glazed or panelled and glazed shutters for doors, windows, c/windows etc. including bright finished brass hinges with necessary screws - (a) local best qlty Leihao wood.

Aluminium glazed windows and ventilators of standard aluminium extrusion section joints mitred and riveted/screwed with 15x3 mm lugs 10cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 ( 1 cem :3 coarse sand : 6 stone aggregate 20 mm nominal size ) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of glass panes 4 mm thick, projecting hinge, handles, peg stays, bolting devices, locking arrangements, sprig catch & aluminium clip beading etc as required complete

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand: : 6 stone aggrt. 20mm nominal guage).

Providing and fixing M.S. sliding door bolts bright finished or black enamelled with nuts & screws etc. complete.(a) 300X16 mm

Providing and fixing M.S. Tower bolts (barrel type)with screws etc. complete (a)250x10mm

Providing and fixing M.S. Handles with screws & nuts complete. (a)125mm

Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint :- 8.4.8 In gratings, framed guard bars, ladders, railings, brackets and similar works.

STEEL WORKS

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrom primer conforming to IS 2079, welded and boltedincluiding special shape washer etc. complete (a) Electric resistant welded tube (Conforming to IS : 1611 - 1979)

Trpizoidal Pre- painted Profile Sheet roofing of approved brnd DYNA Roof or equivalent with self drilling screwsof 68 mm log Xylon coated screws with PVC washer & caps complete, excluding the cost of purlins & trusses. (a) 10.63.1 Pre painted Galvalume Sheet (PPGL) (i) Profile sheet 0.50 mm /4.2 kgs/ sqm.

Trpizoidal Pre- painted Profile Sheet for Ridges Gutter or valley 610 mm wide of approved brand DYNA Roof or euivalent fixed with selt drilling screws of68 mm long Xylon coated screws with PVC washer & caps completed, excluding the cost of purlins rafter & trusses.(a) 10.63.1 Pre painted Galvalume Sheet (PPGL) (i) Profile sheet 0.50 mm /4.2 kgs/ sqm.

Providing and fixing aluminium works for doors windows ventilators and partions worth extruded builts up standard tubular section /appropriate Z sections and other section of approved make conforming to IS 733 and IS 1285 fixed with expansion hold fasteners including necessary filling up gap at junction at top bottom and side with required EPDM rubber/Neoprene gasket etc Aluminium snap beading for glazing /panelling C P brass/stainless steel screws all complete as per archectural drawing and the direction of engineer in charge(glazing and panelling to be paid for separately 10.66.1 Anodised aluminium ( anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15 )

Providing and fixing glazing in aluminium door , windows , ventilator shutter and partition etc with EPDM rudder / neoprene gasket etc complete as per the architectural drawing and the directions of engineer in charge ( Cost of aluminium snap beading shall be paid in basic item ): With plain glass panes of 4 mm thickness

P/F M S sheet eave board 1mm thick welded on M S frame of ISA 25 x 25 x 3mm and flat bars 25 x 3 mm i/c painting etc complete

Designing,fabricating,testing,installing and fixing in psition Curtain Wall with Aluminium Composite Panel Claddding,with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including. a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required ,proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing,fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisiting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick) . The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluroropolymer resin coating of approved colour and shade on face #1 and polymer (Service) coating on face #2 as specified using stainless steel screws ,nuts,bolts,washers,cleats,weather silicone sealant , backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5/ MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement,fasteners, SS316,Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component,the cost of all mock ups at site,cost of all samples of the individual components for testing in an approved laboratory,field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation.Base frame work for ACP cladding is payable under the relevant aluminium items. The contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer -in -Charge. However for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium composite panel cladding(including width of groove) shall be measured in sqm. up to two decimal places.

Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.

SH : FLOORING

40 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm &down gauge) finished with a floating coat of neat cement.

Extra for providing & fixing glass strips in joints of terrazo floors( 40mm wide and 4mm thick ).

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2 (1 cement:2 fine sand). A) 150 mm diameter

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm X 112.5 mm of 1:2:4mix (1 cement:2 coarse sand:4 hardstone ballast 20 mm & down gauge).a)150 mm diameter

SH : FINISHING

12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:).

15mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:).

15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished with a floating coat of neat cement.

Neat cement punning

Applying one coat of cement primer of approved quality on wall surface.

Applying ready mixed priming coat pink primer of appd. quality on wood work.

Providing and applying wall putty/plaster of paris putty of 2 mm thickness over plaster surface to prepared the surface even and smooth complete.

Finishing walls weather shield paint of approved quality on new work ( three or more coats ) to give an even shade.

Painting on wall with ( two coats ) of plastic emulsion paint of approved quality in all shades on new work to give an even shade.

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel work of approved quality in all shades on new steel work to give an even shade.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 Kanhaighat sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 Kanhaighat sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 Kanhaighat sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 Kanhaighat sand) with a floating coat of neat cement inside & outside as per standard design.

WATER SUPPLY (GROUND SUMP)&SANITARY INSTALLATION WITH SEPTIC TANK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:3:6 (1 cem :3 Kanhaighat coarse sand:6 graded stone aggrt. 40mm nominal size).

( b )1:2:4 (1 cem :2 Kanhaighat coarse sand :4 graded stone aggrt. 20mm nominal size).

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3(1 Cem:3Kanhaighat coarse sand:)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand:) in superstructure (a)above plinth.

Reinforcement for R.C.C.work including bending,binding and placing in position complete (b) TMT bars.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string ourses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand: : 3 graded stone aggrt. 20mm nominal size).

RCC work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies,shelves,chajjas, lintels,bands,plain window sill,staircases and spiral staircase upto floor five level but excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand: : 3 graded stone aggrt. 20mm nominal size).

12mm cement plaster 1:4 (1 cement : 4 Kanhaighat coarse sand:).

15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished with a floating coat of neat cement.

Neat cement punning

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply) (a) Foundation footings,bases of column.etc & mass of concrete.

(b) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

( c )Flat surface such as suspended floor,roofs,landing & the like ( i) floor etc upto 200mm in thickness

(d) Vertical surface such as walls (any thickness), partition and the like including attached pilasters,buttreese, plinth and the string courses and the like

(e)Edges of slab and breaks in floor not exceeding 1m in depth

Providing wood work in trusses,purlins,rafter,posts,post plate wall plate & the like wrought framed hoisted & fixed in position.a) Uchan/Tairen/Tolhao/Khangra.

Providing and fixing M.S. round holding down anchor bolts with nuts & washer plate complete.

Supplying 40mmx3mmx275mm F.B. twisted plate i/c cost of bolts & nuts.

Trpizoidal Pre- painted Profile Sheet roofing of approved brnd DYNA Roof or equivalent with self drilling screwsof 68 mm log Xylon coated screws with PVC washer & caps complete, excluding the cost of purlins & trusses. (a) 10.63.1 Pre painted Galvalume Sheet (PPGL) (i) Profile sheet 0.50 mm /4.2 kgs/ sqm.

Providing & fixingf 40mm x 6 mm F.B. wind ties to G.I. sheet roof with hook bolts.

Coal tarring two coats on new work using 10 sqm. Not less than 1.6 litres of coal tar of approved quality for 1st coat 1.2 litres for sacond coat.

PIPE FITTING

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc.( External )(a) 25mm dia.

(b) 40 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc.(Internal work) (a) 15mm Diameter.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre low level white PVC. flushing cistern i/c flush pipe ,manually controlled device (handle level) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required: i) white vetreous china orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests.

Providing and Fixing wash basin with C.I. brackets, 15mm dia cp Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White vitreous china Wash basin size 550X400mm with a 15mm cp Brass single hole basin mixer.

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

P/F600X450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleat with C.P brass screws and washers complete.

P/F UPVC soil,waste, rain water and vent pipes i/call requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge (a) 110mm. Dia.

P/F UPVC soil,waste, rain water and vent pipes i/call requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge (a) 75mm. Dia.

P/F UPVC traps with 110mm inlet and 75mm outlet of self cleaning design with screwed down of hinged grating with or without vend arm complete i/c cost of cutting and making good the walls and floors.

P/F C.I cover with frame for (manhole and chamber) (a) 600x450mm (Heavy duty)(38kg)

Providing and fixing brass stop cock of approved quality.(a) 15mm diameter.

Providing and fixing C.P. bib cock of approved quality. (a) 15 mm diameter.

P/F Brass full way G.M valve with C.I wheel of approved quality (a) 25mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.(i)1000 litres net capacity storage tanks

P/F 1 HP tulu, single phase (CROMOTON) Pumpset with necessary fixtures complete.

STORM WATER DRAIN

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 Kanhaighat coarse sand:8 graded stone aggrt. 40mm nominal size).

( b )1:3:6 (1 cem :3 Kanhaighat coarse sand :6 graded stone aggrt. 20mm nominal size).

( c )1:2:4 (1 cem :2 Kanhaighat coarse sand :4 graded stone aggrt. 20mm nominal size).

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3(1 Cem:3Kanhaighat coarse sand:)

15 mm cement plaster 1:3(1 cement:3 Kanhaighat coarse sand)finished with a floating coat of neat cement.

PAVEMENT FOR PARKING AREA & FRONT OF THE MARKET

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 Kanhaighat coarse sand:: 10 graded stone aggrt. 40mm nominal size).

40 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm &down gauge) finished with a floating coat of neat cement.

IEI Works

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed pvc conduit with modular type switch, modular plate suitable size GI-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

2X10mm2+1X10mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

5/6 amps switch+B147

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 50mm2 four core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver EN DURANEOHESURFACEDLS15W LED 8575 complete with connection as rqd. (Havell's)

S/F fan hook i/c bolt & nuts.

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan,making good the damaged, connection testing commissioning etc.as reqd.

S/F 12"(305mm) dia light duty exhaust fan complete with all accessories

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

S/F bus bar chamber with 4 strips copper bus bar length 600mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc.as reqd.

S/F wall/floor mounted metal board of welded constn.fabricated with minimum 50mm X 50mm X6mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/flat iron for mounting of switch gear i/c painting etc.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way single door

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way single door

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 4 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with copper plate 600x600xmm thick i/c accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipes etc.(but without charcoal and salt complete as reqd.)

Extra for using salt and charcoal for G.I.plates or copper plate earth electrode as reqd.

P/F 4.00 mm dia copper wire on surface or in recess for loop earthing as reqd.

S/F swaged type steel tubular pole 8 mt.long as per 410-SP-14 conforming to IS-2713 (Pt-II) 1980 with bracket in cement concrete 1:3:6 (1 cem.:3 c/sand : 6 gr. St. 40mm n/size) foundation i/c excavation and refilling etc. as reqd.

S/F L.T. cross arm 50X50X6mm - 2 wires

S/F back clamp for L.T. pole

S/F stay set complete with stay wire & stay insulator etc.as reqd.

Supply and drawing of AB cable of size (3x50+1x35)mm2

SITC LED Street Light 40W 7500K made of pressure dia housing with toughned glass and individual high power LED with secondary optics IP66 protection & impact resistance of IK07 (Havells) LHETAX07PN6J045 complete with all accessories i/c connection etc. as reqd.

Th Bimolchand Luwang

M Gunananda Sharma