WBPWD/SSKM(H.)ESD/NIQ-161 of 2025-26

SUB-HEAD 1--DISTRIBUTION WIRING Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single corestranded 'FRLSH' PVC insulated & unsheathed copper wire (Polycab /Gloster/KEI/RR Kabel/Havells) in 20mm size PVC rigid conduit 'FR' HMS/MMS type (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell pointswithPianoKey type switch fixed on MSCRC sheet metal (16SWG) switch boardcum JB onwall complete with 2no. suitable size“Ph&N”copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspectionbox, making earthing attachment, painting the MS box and mending good the damages to original finish.

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Polycab/Gloster/KEI/RR Kabel/Havells)) in 20mm size PVC rigid conduit 'FR' HMS/MMS type (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish.

On Board

Average run 6 mtr

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] HMS/MMS type on wall, ceiling with saddles and other accessories as required and mending good damages to building work

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge 19 mm dia 3 mm thick polythene pipe without earth continuity wire pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. ( Havells/ Polycab/ RR Kable/Gloster/KEI)

2 x (1.5 sqmm)+1x(1.5 sqmm)

2 x (2.5 sqmm)+1x(1.5 sqmm)

2 x (4 sqmm)+1x (2.5 sqmm)

2 x (6 sqmm)+1x (4 sqmm)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

SUB-HEAD 2--BDB,PDB,VTPN ETC Supplying and fixing double-door 2+12 Way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make - Legrand/LK/ABB)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make -Legrand/LK/ABB]

6-32 SP MCB

40 DP Isolator

SUB-HEAD 4-- PLUGS & SOCKETS Supplying & Fixing CRC sheet metal (16SWG) JB-cum Switch Board of the following sizes complet ewith three no. suitable size Copper bar withholes (forPh,N&E) fixedon bakelite/Hard Rubber insulato rover the MS welded chairs incl. bakelite/ Perspex /coloured Perspex(wal lmatching colour) top cover 3mm thick flushed inwall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works

175 mm x 100 mm x 65 mm

240 mm x 200 mm x 65 mm

Supply & Fixing 240V6A Piano key types witch (Brand approved by EIC )on existing sheet metal switch board having bakelite /perspex top cover by screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required.

Supply&Fixing 240V16/20A Piano key type switch (Brand approved by EIC) on existing sheet metals witch board having bakelite/ perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply&Fixing 240V,6A plug socket (Brand approved by EIC), without switch & plug top, onexisting sheet metal switch board with bakelite/ perspex top cover by screws after making housing for plug by cutting bakelite/ perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing shee tmetal switch board with bakelite/ perspex top cover by screws after making housing for combined plug switchby cutting bakelite / perspex top cover and making necy. connections with PVCwire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/ perspex top cover incl. making necy. connections etc.

SUB-HEAD 5 -FIXING OF LIGHT FITTINGS Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener.

Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/ socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only lamp

SUB-HEAD 6 - SUPPLY OF LIGHT FITTINGS Supply and Delivery of 4 feet Industrial box type single LED tube fitting incl. Supply & Delivery of 1 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supply and Delivery of 4 feet Industrial box type twin LED tube fitting incl. Supply & Delivery of 2 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 105 Lm/ Watt or better & 50,000 LED burning hours or more. [Make - Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supply & Delivery of 240V, 9W LED lamps of following wattage with glare free light distribution having minimum luminous efficiency of 100 Lm/ Watt or better & 17 50,000 LED burning hours or more. [Make-Philips/Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

SUB-HEAD 7 -- FIXING OF FANS Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Fixing only (12") exhaust fan after making holes in wall as per GS.

Supply & Fixing GI sheet (20SWG) (12") metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x62 mm long)

SUB-HEAD 8 -- SUPPLY OF FANS Supply & Delivery of 230V, 1-Ph, AC ceiling fan of follwing size incl. all accessories. [BEE star rated] [The capacitor of fan must be P-2 type brust proof. And Winding material : Copper (TDS to be provided for the relevant parameters, including indication of the winding material as copper)] 1200 mm (48"), Wattage :S 55 Watt, R.PM :S 380, Air Delivery;:: 210CMM (Make - Crompton / Usha / Orient)

Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body. 225 mm (9"), 4 Blade, RPM s 1400, Wattages 45 Watt, Sound levels 49 dB, Air Displacement (In CMH) ;, 440(TDS to be provided for the relevant parameters, including indication of the winding material as copper) (Make-EPC/ USHA/Orient CROMTON) [ISi mark, IP55 rated]

Supply & Delivery of 230V, 50Hz, 450 mm sweep heavy duty full metal body Pedestal fan an having wattage,; 100 Watt, RPM,; 1440, Air Displacement (In CMH) ;,; 7500 complete with all accessories. (TDS to be provided for the relevant parameters, including indication of the winding material as copper) (Make -Orient / Crompton / EPC) [As per IS standard]

SUB-HEAD 9 -- MISCELENEOUS Dismantling the existing wiring including existing switch boards, plug points DB etc and submitting the same to the Section office and disposing rubish as per direction of EIC.

(Make & Model no. of each & every items to be approved by EIC.) Less cost for dismantled unserviceable materials Rs. 1000/- D.L.P.: 1 (One) Year after completion