Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹31.0 LAccepted-AOC DHOBI MOHALLA BATMALOO SRINAGAR 190010 J K | SRINAGAR | SRINAGAR | J K | 190010 | ₹31.0 L | L-1 | Accepted-AOC Award of contract |
| 2 | L-2₹32.6 LRejected-Finance | ₹32.6 L | L-2 | Rejected-Finance Not being L-1 |
| 3 | L-3₹33.0 LRejected-Finance | ₹33.0 L | L-3 | Rejected-Finance Not being L-1 |
| 4 | L-4₹37.4 LRejected-Finance | ₹37.4 L | L-4 | Rejected-Finance Not being L-1 |
| 5 | L-5₹37.5 LRejected-Finance SANAT NAGAR SRINAGAR PIN 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | ₹37.5 L | L-5 | Rejected-Finance Not being L-1 |
| Sl No | Description | Qty | Unit | M/S ASHRAF CONSTRUCTIONS L1 | M/S BHAT ENGINEERING WORKS L5 | M/S MUHIBULFUKARA ENTERPRISES L3 | M/S Noor Mohammad Shalla L2 | M/S BILAL AHMAD BHAT L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Maintenance and servicing of standby DG Set complete including draining out of diesel from tank , cleaning the tank thoroughly and refilling the drained out diesel, draining out engine oil from the sump, cleaning the sump thoroughly and refilling the sump with new engine oil to it’s required level & draining out of coolant from radiator, cleaning the radiator thoroughly and refilling the radiator with new coolant to it is required level. Replacing the fuel filter (primary & secondary filters), lubricating oil filter , check & clean air cleaner , change air cleaner elements, & make up the same filling the starting batteries with electrolyte/distilled water to maintain the required specific gravity, replace the u/s brass connectors for batteries, cleaning of battery terminals & applying petroleum jelly to battery terminal posts & brass connectors, including M & L for V Belts, checking of exhaust leakage, governor, breathers etc, adjust/set the same for proper functioning of DG Set, checking of fuel, oil and water/ coolant level etc, adjusting and keeping the fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer and test for satisfactory running of DG set for two hour at connected load and record shall be made in respect of RPM , oil pressure , oil temperature , coolant temperature, voltage , frequency , load current , battery charging , fuel consumption etc complete all as specified and directed by Engineer in Charge for up to 20 KVA DG set Note :-
(a). Engine oil for filling will be measured and paid for separately as supply only. Labour element for filling of engine oil is included in this item and nothing shall be paid extra on this acount.
(b). Coolant for make up will be measured & paid for separately as supply only. Labour element for filling of cooling is included in this item and nothing shall be paid extra on this account.
(c). Testing will be carried out in presence of Engineer - in - charge.The rate of testing is included in this item and nothing shall be extra paid on this account
(d). The Make of Fuel filter , Oil Filter , V belt & component will be as per manufactures recommendations ( Rate of fuel filter, oil filter, air filter and V belt shall deem to be included in quoted rate and nothing shall be paid extra on this account.) | 3 | Each Job | 2,000 ₹6,000 | 2,000 ₹6,000 | 4,500 ₹13,500 | 1,500 ₹4,500 | 6,000 ₹18,000 |
| 2.00 | All as per item No.1.00 here-in-before but for 25 KVA DG SET | 2 | Each Job | 2,000 ₹4,000 | 2,000 ₹4,000 | 10,000 ₹20,000 | 1,800 ₹3,600 | 20,000 ₹40,000 |
| 3.00 | All as per item No.1.00 here-in-before but for 30 KVA DG SET. | 2 | Each Job | 2,000 ₹4,000 | 2,000 ₹4,000 | 6,000 ₹12,000 | 1,900 ₹3,800 | 8,000 ₹16,000 |
| 4.00 | All as per item No.1.00 here-in-before but for up 32.5 KVA to 35 KVA DG SET. | 5 | Each Job | 12,000 ₹60,000 | 2,300 ₹11,500 | 6,000 ₹30,000 | 2,900 ₹14,500 | 9,000 ₹45,000 |
| 5.00 | All as per item No.1.00 here-in-before but 40 KVA DG SET. | 3 | Each Job | 12,000 ₹36,000 | 2,300 ₹6,900 | 150 ₹450 | 3,100 ₹9,300 | 800 ₹2,400 |
| 6.00 | All as per item No.1.00 here-in-before but 50 KVA DG SET. | 2 | Each Job | 12,000 ₹24,000 | 2,500 ₹5,000 | 8,000 ₹16,000 | 3,500 ₹7,000 | 20,000 ₹40,000 |
| 7.00 | All as per item No.1.00 here-in-before but for 62.5 KVA to 63 KVA DG SET. | 5 | Each Job | 13,000 ₹65,000 | 2,700 ₹13,500 | 3,000 ₹15,000 | 4,400 ₹22,000 | 9,000 ₹45,000 |
| 8.00 | All as per item No.1.00 here-in-before but for 82.5 KVA DG SET. | 2 | Each Job | 20,000 ₹40,000 | 2,900 ₹5,800 | 6,000 ₹12,000 | 5,000 ₹10,000 | 18,000 ₹36,000 |
| 9.00 | All as per item No.1.00 here-in-before but for 100 KVA to 125 KVA DG SET. | 3 | Each Job | 22,000 ₹66,000 | 3,000 ₹9,000 | 1,800 ₹5,400 | 5,200 ₹15,600 | 18,000 ₹54,000 |
| 10.00 | All as per item No.1 here-in-before but 160 KVA DG SET. | 1 | Each Job | 22,000 ₹22,000 | 3,000 ₹3,000 | 18,000 ₹18,000 | 5,300 ₹5,300 | 18,000 ₹18,000 |
Updated dates
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
10 Feb 2026, 6:00 pmClosed
GE 861 EWS
GE 861 EWS PIN-913861 C/o 56 APO
REPAIR /MAINT OF DG SETS AND SERVO VOLTAGE STABLIZERs AT KHUNDRU, KHANABAL, KHUNMOH AND KHREW UNDER GE 861 EWS
2026_MES_748036_1
GE 861 EWS-59(T)/2025-26
Open Tender
Civil Works
150 days
GE 861 EWS
As per tender documents
7 documents required · 7 mandatory
₹500
Yes
GE 861 EWS
₹80,000
Yes
2 Apr 2026
10 Jan 2026
12 Feb 2026
10 Jan 2026
10 Feb 2026
27 Jan 2026
All as per item No.1.00 here-in-before but for 25 KVA DG SET
All as per item No.1.00 here-in-before but for 30 KVA DG SET.
All as per item No.1.00 here-in-before but for up 32.5 KVA to 35 KVA DG SET.
All as per item No.1.00 here-in-before but 40 KVA DG SET.
All as per item No.1.00 here-in-before but 50 KVA DG SET.
All as per item No.1.00 here-in-before but for 62.5 KVA to 63 KVA DG SET.
All as per item No.1.00 here-in-before but for 82.5 KVA DG SET.
All as per item No.1.00 here-in-before but for 100 KVA to 125 KVA DG SET.
All as per item No.1 here-in-before but 160 KVA DG SET.
All as per item No.1 here-in-before but for 200 KVA DG SET.
All as per item No.1 here-in-before but for 250 KVA DG SET.
Supply only multi-grade 15W40 lubricating oil for DG Sets as per manufacturer’s recommendations, complete all as specified and directed by Engineer-in-charge. Labour element for filling of oil is included under serial item no.1.00 to 12.00 of BoQ here-in-before .
Supply only coolant for radiator for any type of DG SET of any capacity as per manufacturer’s recommendations, complete all as specified and directed by Engineer in Charge. Labour element for filling of coolent is included under serial item no.1.00 to 12.00 BoQ here-in-before .
Repair & Overhauling of radiator assembly up to 20 KVA DG set by dismantling from engine ,transporting to the workshop and removing the sediments and scales, corrosion etc by means of acid, cleaning and high pressure water washing and air cleaning, gas welding / soldering with good quality material for stopping the leakage etc, re-assembling the same with new gaskets and transporting to the site, fixing to the engine with hoses, clips complete to the entire satisfaction of engineer - in - charge as required for following DG Sets:
All as per item No.15.00 here-in-before but for 30 KVA DG Set.
All as per item No.15.00 here-in-before but for 35 KVA DG Set.
All as per item No.15.00 here-in-before but for 40 KVA DG Set.
All as per item No.15 .00 here-in-before but for 50 KVA DG Set.
All as per item No.15.00 here-in-before but for 62.5 KVA TO 63 KVA DG Set.
All as per item No.15.00 here-in-before but for 82.5 KVA DG Set.
All as per item No.15.00 here-in-before but for 100 KVA DG Set.
All as per item No.15.00 here-in-before but for 125 KVA DG Set.
All as per item No.15.00 here-in-before but for 160 KVA DG Set.
All as per item No.15.00 here-in-before but for 200 KVA DG Set.
All as per item No.15.00 here-in-before but for 250 KVA DG Set.
Supply & fix Hose pipe set & Clips of water / coolant cooled radiator system for DG set upto 125 KVA DG set.
All as per item No.27.00 here-in-before but above 125 KVA and upto 160 KVA DG set.
Dismantling the water pump of the DG Set taking out the worn out parts, refixing the water pump in the same position after replacing the worn out parts with new water pump repair kit set for DG set upto 125 KVA DG set complete all as specified and directed.
All as per item No.29.00 here-in-before but above 125 KVA and upto 160 KVA.
Dismantling & strip opening of self starter for 12 volt/24 volt inspecting /checking the complete parts & taking out worn out parts/unserviceable parts and making the self starter functional after replacing the new parts as required and directed. Note: The rate of all Spare parts is inclueded in this item and nothing shall be extra paid on this account. .
S&F following items to self starter of existing make as approved by Engineer-in-charge .(a)S&F Armature assembly 12 volt suitable for 80 AH to 150 AH.
(b) S&F Solenoid switch 12 volts
(c)S & F Field coil 12 volts
(d)S&F Bendex pinion 12 volts complete
(e)S&F Carbon brush
S&F following items to self starter of existing make as approved by Engineer-in-charge. (a)S&F Armature assembly 24 volt suitable for 150 AH to 180 AH
(b)S&F Solenoid switch 24 volts
(c )S&F Field coil 24 volts
(d)S&F Bendex pinion 24 volts complete
(e) S&F Carbon brush
Material and labour for servicing battery charging alternators assembly of DG Set up to 20 KVA DG set. by disconnecting from engine and dismantling the battery charging alternator assembly for following DG set cleaning all accessories and replacing with worn out parts like carbon brush, bush/bearing , jumping leads etc, and varnishing all as directed.
All as per item No.42.00 here-in-before but for 25 KVA to 30 KVA DG Set.
All as per item No.42.00 here-in-before but for 32.5 KVA to 40 KVA DG Set.
All as per item No.42.00 here-in-before but for 41 KVA to 50 KVA DG Set.
All as per item No.42.00 here-in-before but for 62.5 KVA to 63 KVA DG Set.
All as per item No.42.00 here-in-before but for 82.5 KVA DG Set.
All as per item No.42.00. here-in-before but for 100 KVA to 125 KVA DG Set.
All as per item No.42.00 here-in-before but for 160 KVA to 200 KVA DG Set.
Disconnection and dismantling the fuel injector pump assembly up to 20 KVA DG set from its original position, Overhauling & servicing by cleaning / oiling/servicing of fuel injector pump assembly, removing and replacement with and including fuel injector pump, repair kit, fuel pipe and injectors including calibration & refixing the same complete all as directed by Engineer-in-charge.
All as per item No.50.00 here-in-before but for 25 KVA to 30 KVA DG Set.
All as per item No.50.00 here-in-before but for 32.5 KVA to 40 KVA DG Set.
All as per item No.50.00 here-in-before but for 50 KVA DG Set.
All as per item No.50.00 here-in-before but for 62.5 KVA to 63 KVA DG Set.
All as per item No.50.00 here-in-before but for 82.5 KVA DG Set.
All as per item No.50.00 here-in-before but for 100 KVA to 125 KVA DG Set.
All as per item No.50.00 here-in-before but for 160 KVA to 200 KVA DG Set.
S&F in repairs RPM meter of DG set complete all as specified and directed.
S&F in repair oil pressure Gauge on DG set complete all as specified and directed.
S&F in repair oil temperature Gauge on DG set complete all as specified and directed.
S&F in repair water temperature Gauge on DG set complete all as specified and directed.
S&F in repair fuel indication gauge on DG set complete all as specified and directed.
S&F in repair PVC insulated stranded copper conductor cable of 16 sqmm single core, of 2 Mtr length, soldered with 2 Nos battery terminals suitable for 60-180 Ah 12V DC battery, complete all as specified and directed.
Dismantling asbestos rope from silencer of DG set and supply & fixing asbestos rope (8/10mm thick) around silencers complete all as specified and directed.
M&L for preparation of old painted surfaces of DG Set complete (DG Set cap 32.5 KVA to 35 KVA) with fuel tank by scrapping / removing old paint / dust etc and painting with two coats of synthetic enamel paint (colour & tint as approved) over a coat of red oxide primer including caliberation of capacity and marking/writing as follows:- (a) Tank capacity (b) Tank cleaned on due date.
Disconnecting, and taking out carefully unserviceable alternator, transformer and old pattern AVR of any make and any capacity of DG Sets , dismantling and strip opening of alternator for servicing, taking out and removing old burnt out winding and rewinding of alternator with existing gauge super enamelled copper wire as approved by the Engineer-in-Charge with insulating material such as luminous paper, latherized paper, cotton tape, glass sleeves, insulating varnish & alternators making new to shunt field coil,main poles, yoke, armature slot, armature, commutator, bushes, bearing, shaft magnatic, pole shoe, boring, making new to cleaning slots / Declaying of slots if it get damaged etc, including reassembling and fixing the same in position and testing alternator assembly, complete all as specified and directed by the Engineer-in-Charge. Note: The contractor shall make all the arrangements for repair and rewinding of alternator, transformer and old pattern AVR of any make and any capacity of DG Sets to make it functional however the payment shall only be made for the qty of copper wire used for winding.
Disconnecting, and taking out carefully unserviceable alternator any make 21 KVA to 50 KVA capacity of DG Sets , dismantling and strip opening of alternator for servicing, taking out and removing old burnt out winding and rewinding of alternator with existing gauge super enameled copper wire as approved by the Engineer-in-Charge with insulating material such as luminous paper, latherized paper, cotton tape, glass sleeves, insulating varnish & alternators making new to shunt field coil, main poles, yoke, armature slot, armature, commutator, bushes, bearing, shaft magnatic, pole shoe, boring, making new to cleaning slots / Declaying of slots if it get damaged etc, including reassembling and fixing the same in position and testing alternator assembly, complete all as specified and directed by the Engineer-in-Charge.
Supply only super enamelled copper wire winding of existing gauge with all safety and insulating materials as approved by the Engineer-in-Charge.
Taking out following defective parts from Alternator of DG sets AVR unit complete for up to 20 KVA DG Set and supply and fixing new parts in same position including testing, complete all as specified and directed by Engineer-in-Charge.
All as per item No.69.00 here-in-before but for 25 KVA to 30 KVA DG Set.
All as per item No.69 .00 here-in-before but for 32.5 KVA to 40 KVA DG Set.
All as per item No.69.00 here-in-before but for 50 KVA DG Set.
All as per item No.69.00 here-in-before but for 62.5 KVA to 63 KVA DG Set.
All as per item No.69.00 here-in-before but for 100 KVA to 125 KVA DG Set.
All as per item No.69.00 here-in-before but for 160 KVA to 200 KVA DG Set.
All as per item No.69.00 here-in-before but for Terminal plate
All as per item No.69.00 here-in-before but for Silicon Rectifier assembly with metallic plate as existing covered with thin layer of selenium and inverted nut bolt , control wiring soldering complete all as specified and directed.
All as per item No.69.00 here-in-before but for Flexible rubber coupling star type capacity alternator coupled for 10 KVA to 40 KVA , complete all as specified and directed.
All as per item No.69.00 here-in-before but for Flexible rubber coupling star type capacity alternator coupled with Kirloskar or any approved make of DG set for 41 KVA to 82.50 KVA, complete all as specified and directed.
S & F in repair flexible fuel pipe of 5.00 Mtr length including end hexagonal nut bolts etc, complete all as specified and directed.
S & F in repair ignition switch push button type, complete all as specified and directed.
S&F in repair lead acid battery maintenance free 12 Volt 150Ah, complete all as specified and directed
All as per item No.82.00 here-in-before but for 12 Volt 180Ah.
S&F in repair self starter 12 V for DG set for upto 25 KVA suitable for kirloskar, Ruston & CG complete all as specified and directed.
(b) All as per item No.84.00 here-in-before but for 30 KVA to 40 KVA.
(c) All as per item No.84.00 here-in-before but for 63 KVA to100 KVA
(d) All as per item No.84.00 here-in-before but for 125KVA to 160KVA.
S&F brass terminal for batteries including taking out and removing existing unserviceable terminals, complete all as specified and directed.
M&L for top overhauling of DG set for 10 KVA to 25 KVA of any Make with and including taking down of the old unserviceable parts such as inlet and exhaust valve mechanism, valve guide sheet, tappets, cylinder liners, pressure ring, oil rings, piston, connecting rod and gudgeon pin including lathe work as required for top over hauling and fixing the unserviceable parts in same position, complete all as specified and directed. Note :- Spare parts shall be measured and paid for separately under respective items at supply only rates for following capacities of DG Sets
All as per item No.89.00 here-in-before but for 30 KVA to 82.5 KVA.
All as per item No.89.00 here-in-before but for above 82.5 KVA to125 KVA
All as per item No.89 here-in-before but for above 125 KVA to 160KVA.
Supply only Sleeves liner, complete all as specified and directed.
Supply only Piston , complete all as specified and directed.
Supply only Piston oil ring, complete all as specified and directed.
Supply only Piston pressure ring, complete all as specified and directed.
Supply only Inlet valve mechanism, complete all as specified and directed.
Supply only Exhaust valve mechanism, complete all as specified and directed.
Supply only Connecting rod bearing , complete all as specified and directed.
Supply only Valve guide, complete all as specified and directed.
Supply only connecting rod bush, complete all as specified and directed.
Supply only Valve guide sheet, complete all as specified and directed.
Supply only FIP calibration, complete all as specified and directed.
Supply only Injectors, complete all as specified and directed.
Supply only Inlet and exhaust valve spring, complete all as specified and directed.
Supply only Head gasket set, complete all as specified and directed.
Supply only injector sleeves, complete all as specified and directed.
Supply only Connecting rod, with nuts, seal packing, complete all as specified and directed.
Supply only oil cooler with all nuts and packing etc complete all as specified and directed
Supply only Oil pump with all accessories used in fixing complete all as specified and directed.
Supply only Feed pump with all accessories used in fixing complete all as specified and directed.
Supply only Banjo bolt with washer and packing etc, complete all as specified and directed.
Supply only Compressor ring, complete all as specified and directed.
Supply only Turbo Charger complete with all accessories used in fixing complete all as specified and directed.
Supply only Exhaust fan with all accessories used in fixing etc complete all as specified and directed.
Supply only Turbo fan with all accessories used in fixing etc complete all as specified and directed.
M&L for head repair complete with lathe work including all boring work complete as per existing and fixing again in engine complete all as specified and directed.
Supply only valve seal, complete all as specified and directed.
Supply only valve lock, complete all as specified and directed.
Supply only Actuator with all accessories used in fixing, complete all as specified and directed.
Supply only ECU with all accessories used in fixing, complete all as specified and directed.
Supply only Suppressor with all accessories used in fixing, complete all as specified and directed.
Supply only Governor with all accessories used in fixing, complete all as specified and directed.
Supply only NRV with complete accessories used in fixing, complete all as specified and directed.
Supply only MPU complete with all accessories used in fixing , complete all as specified and directed.
Supply only Stop Solenoid with all accessories used in fixing, complete all as specified and directed.
Supply only IPS sensor with all accessories used in fixing, complete all as specified and directed.
Supply only Oil sensor with meter and all accessories used in fixing, complete all as specified and directed.
Supply only Ignition switch with all accessories used in fixing, complete all as specified and directed.
M&L for top overhauling of DG set 32.5 KVA to 40 KVA Make : Cummins, KEC , Mahindra, greaves and kirloskar with and including of taking down of the old unserviceable parts such as inlet and exhaust valve mechanism, valve guide sheet, tappets, cylinder liners, pressure ring, oil rings, piston connecting rod and gadgeon pin and lathe work as required for top over hauling including fixing all the necessary parts in position, complete all as specified and directed. Note :- (i) Spare parts shall be measured and paid seperately under serial items nos. 132 to 141 of BOQ as supply only . The labour element of serial item no. 132 to 141 is included under serial itelm no. 130 & 131 . Nothing shall be extra paid on this account .
All as per item No.130.00 here-in-before but 41 KVA to 63 KVA.
Supply only Sleeves liner, complete all as specified and directed.
Supply only Piston , complete all as specified and directed.
Supply only Piston oil ring, complete all as specified and directed.
Supply only Piston pressure ring, complete all as specified and directed.
Supply only Inlet valve mechanism, complete all as specified and directed.
Supply only Exhaust valve mechanism, complete all as specified and directed.
Supply only Connecting rod bearing , complete all as specified and directed.
Supply only Valve guide, complete all as specified and directed.
Supply only connecting rod bush, complete all as specified and directed.
Supply only Valve guide sheet, complete all as specified and directed.
Supply and fixing FIP calibration, complete all as specified and directed.
Supply and fixing Injectors, complete all as specified and directed.
Supply and fixing Inlet and exhaust valve spring, complete all as specified and directed.
Supply and fixing Head gasket set, complete all as specified and directed.
Supply and fixing Connecting rod, with nuts ,seal packing, complete all as specified and directed.
Supply and fixing oil cooler with all nuts and packing etc complete all as specified and directed
Supply and fixing Oil pump with all accessories used in fixing complete all as specified and directed.
Supply and fixing Feed pump with all accessories used in fixing complete all as specified and directed.
Supply and fixing Banjo bolt with washer and packing etc, complete all as specified and directed.
Supply and fixing Compressor ring, complete all as specified and directed.
Supply and fixing Turbo Charger complete with all all accessories used in fixing complete all as specified and directed.
Supply and fixing Exhaust fan with all accessories used in fixing etc complete all as specified and directed.
Supply and fixing Turbo fan with all accessories used in fixing etc complete all as specified and directed.
M&L for head repair complete with lathe work including all boring work complete as per fixing again in engine complete all as specified and directed.
Supply and fixing valve seal complete all as specified and directed.
Supply and fixing valve lock complete all as specified and directed.
Supply and fixing Actuator with all accessories used in fixing, complete all as specified and directed.
Supply and fixing ECU with all accessories used in fixing, complete all as specified and directed.
Supply and fixing Suppressor with all accessories used in fixing, complete all as specified and directed.
Supply and fixing Governor with all accessories used in fixing, complete all as specified and directed.
Supply and fixing NRV with complete accessories used in fixing, complete all as specified and directed.
Supply and fixing MPU complete with all accessories used in fixing , complete all as specified and directed.
Supply and fixing Stop Solenoid with all accessories used in fixing, complete all as specified and directed.
Supply and fixing IPS sensor with all accessories used in fixing, complete all as specified and directed.
Supply and fixing Oil sensor with meter and all accessories used in fixing, complete all as specified and directed.
Supply and fixing Ignition switch with all accessories used in fixing, complete all as specified and directed.
Supply and fixing injector sleeves, complete all as specified and directed.
Scraping old paint from the voltage stabilizer 3 phase for 10 KVA to 100 KVA capacity voltage stabilizer and preparation of surface and re-painting the voltage stabilizers by spraying synthetic enamel paint of approved colour and make, writing SM/MES No and capacity with white paint all as required at site, complete all as specified and directed.
All as per item no 169.00 here-in-before but for for above 100 KVA to 225 KVA voltage stabilizer.
Taking out unserviceable control wiring complete from servo controlled voltage stabilizer for up to 20 KVA capacity and of any make 3 phase 415 volts for unbalanced load. Providing wiring loom complete to the stabilizers made out of suitable size PVC insulated copper conductor cable including cables lugs, connectors, channels and fixing in replacement of any other worn out/unserviceable items to make it functional, complete all as specified and directed. Note:-Additional items required to make stabilizers serviceable will be measured and paid separately under respective items.
(b) All as per item no 171.00 here-in-before but above 21 KVA upto 40 KVA stabilizer
(c) All as per item no 171.00 here-in-before but above 40 KVA upto 60 KVA stabilizer
(d) All as per item no 171.00 here-in-before but For above 60 KVA upto 80 KVA stabilizer
(e) All as per item no 171.00 here-in-before but above 80 KVA upto 100 KVA stabilizer
(f) All as per item no 171.00 here-in-before but For above 100 KVA upto 160 KVA stabilizer
(g) All as per item no 171.00 here-in-before but For above 160 KVA upto 200 KVA stabilizer
S&F in replacement of digital control servo card for voltage stabilizer for input supply output supply with following specifications: for 10KVA to 63KVA. (a) High voltage cut off protection (b) Voltage reduction (c) Automatic ON after 10 sec time delay (d) Duel display (e) Cast iron CT for Ampere usage all as specified and directed by EIC.
Supply only synchronous motor single phase AC 230 volts Capacity up to 50 KVA.suitable to work with voltage stabilizer of any Make as approved by Engineer-in-charge with torque up to 5 Kg/cm2, complete all as specified and directed.
All as per item no 179.00 here-in-before but for Capacity above 50 KVA to 225 KVA.
Supply and fixing gear suitable for synchronous motors to operate the shaft for variable dimmer stat.
Supply only trigger (control) transformer with primary voltage 230 volts and secondary voltage any desired voltage between 12 volts to 60 volts to suit the control circuit of the stabilizer as per sample.
Supply and fixing dimmer stat 28 amps rating suitable for voltage stabilizer of any capacity up to 50 KVA per phase of any make to match with existing system, complete all as specified and directed.
Supply and fixing dimmer stat 70 amps rating suitable for voltage stabilizer of any capacity up to 50 KVA per phase of any make to match with existing system, complete all as specified and directed.
Supply and fixing dimmer stat 60 amps rating suitable for voltage stabilizer of any capacity here-in-before up to 50 KVA to 100 KVA per phase of any make to match with existing system, complete all as specified and directed.
Supply and fixing dimmer stat 100 amps rating suitable for voltage stabilizer of any capacity up to 200 KVA per phase of any make to match with existing system, complete all as specified and directed.
Supply and fixing dimmer stat 140 amps rating suitable for voltage stabilizer of any capacity here-in-before up to 51 KVA to 100 KVA per phase of any make to match with existing system, complete all as specified and directed.
Supply only dimmer stat 280 amps rating suitable for voltage stabilizer of any capacity up to 200 KVA per phase of any make to match with existing system, complete all as specified and directed.
Supply only drive assembly complete suitable for voltage stabilizers any make as approved by Engineer-in-charge up to 100 KVA per phase complete all as specified and directed.
Supply and fixing drive assembly complete suitable for voltage stabilizers any make as approved by Engineer-in-charge for 101 KVA up to 200 KVA per phase Division, complete all as specified and directed.
Supply and fixing carbon brush with holder as per sample held in Sub Division suitable for voltage stabilizer of any make as approved by Engineer-in-charge , any capacity upto 50 KVA, complete all as specified and directed.
Supply and fixing carbon brush with holder as per sample held in Sub Division suitable for voltage stabilizer of any make as approved by Engineer-in-charge, any capacity 51 KVA to 200KVA, complete all as specified and directed.
Taking out main dimmer of the voltage stabilizer for repair/rewinding and rewinding of the main dimmer using super enamelled copper winding wire of existing gauge including leatherite paper, PVC sheets, sleeves etc all as required including varnishing complete with insulating varnish, drying and refixing to the stabilizer after testing, complete all as specified and directed. Note: The contractor shall make all the arrangements for repair and rewinding of stabilizers to make it functional however the payment shall only be made for the qty of copper wire used for winding.
Supply and fixing in replacement brass studs with nuts, washers etc complete including porcelain bushes suitable for voltage stabilizers upto 50 KVA capacity of any make as approved by Engineer-in-charge complete all as specified and directed.
All as per item No.194.00 here-in-before but above 50 KVA up to 100 KVA stabilizer.
All as per item No.194.00here-in-before above 100 KVA up to 200 KVA stabilizer.
Filtration of transformer oil of Voltage Stabilizer oil type up to 150 KVA capacity installed at different sub stations/locations using filtration plant , dehydration and improving di-electric strength of the oil to withstand 40 KV for one minute including testing of oil as specified and directed. NOTE : Stabilizer oil test kit shall be provided by the contractor at site for testing of oil.The rate of this aspect is included in this item and nothing shall be paid extra on this account.
M&L for Filling in with new Stabilizer/transformer oil low viscosity of approved make as per IS-335 of 1992 and di-electric strength 50 KV when tested at 1mm & 2mm gap all as specified and directed by Engineer-in-Charge.
Blank
All as per item No.200.00 here-in-before but above 40 KVA upto 160 KVA DG Set.
All as per item No.200.00 here-in-before but above above 60 KVA upto 200 KVA DG Set.
S&F 3 pole AC control power contactor, 415 volts, Phase 50hz rated operational current 32Amp, AC 3 rating confirming to IEC-60947 with suitable NO & NC auxiliary contactor in AMF/Motor control panel as required complete fixing with existing control panel and testing for smooth functioning as directed by Engineer-in-Charge.
S&F 3 pole AC control power contactor, 415 volts, Phase 50 hz rated operational current 63 amp. & AC 3 rating confirming to IEC-60947 in AMF Panel complete all as specified and directed.
S&F 3 pole AC control power contactor, 415 volts, Phase 50 hz rated operational current 95 amp. & AC 3 rating confirming to IEC-60947 in AMF Panel complete all as specified and directed.
S&F 3 pole AC control power contactor, 415 volts, Phase 50 hz rated operational current 160 amp. & AC 3 rating confirming to IEC-60947 in AMF Panel complete all as specified and directed.
S&F 3 pole AC control power contactor, 415 volts, Phase 50 hz rated operational current 300 amp. & AC 3 rating confirming to IEC-60947 in AMF Panel complete all as specified and directed.
S&F 3 pole AC control power contactor, 415 volts, Phase 50 hz rated operational current 400 amp. & AC 3 rating confirming to IEC-60947 in AMF Panel complete all as specified and directed.
S & F contactor coil MNX-140, 415 Volts complete all as specified and directed.
S & F contactor coil MNX-400, 415 volts complete all as specified and directed.
S & F contactor coil ML-10, 415 volts complete all as specified and directed.
S & F contactor coil ML-6, 415 volts complete all as specified and directed.
S&F Electronic Star-Delta timer 240 V VAC 50/60 Hz Tolerance limt - 20% to +10% Contact 5A @ 240 VAC Timing 3 Sec to 120 Sec complete including setting with existing control panel and testing for smooth functioning as directed by Engineer-in-Charge.
S & F Supply monitoring Device for phase, neutral & voltage control supply 3P4W, 415 VAC, 47 to 53 Hz series - SM 500 of L & T make suitable for operating 20 Hp 30 Hp Submersible pump and motor including setting with existing control panel and testing for smooth functioning as directed by Engineer-in-Charge.
S & F relay for contactor 600 V AC class 10 Trip Amps 0.25 - 0.40 Amps of ABB make model no TA 25DU-M IP-20 confirming to IEC-60947 complete including setting with existing control panel and testing for smooth functioning as directed by Engineer-in-Charge.
Supply and fixing holder for printed control card circuit suitable for any make voltage stabilizer including connections by soldering , complete all as specified and directed.
Supply and fixing micro switch (limit switch) suitable to cut off supply to control motors on high and low set limits as per sample held in sub divn, complete all as specified and directed.
Supply and fixing auto manual toggle switch 2 way 5 amps 230 volts including connecting electrically, complete all as specified and directed.
Supply and fixing voltmeter digital type 30volt to 600 volts of suitable size etc complete all as specified and directed.
Supply and fixing printed control card circuit suitable for voltage stabilizer of any make as approved by Engineer-in-charge complete all as specified and directed.
Supply and fixing indicator with bulb, red, yellow or green 230 volts complete all as specified and directed.
Supply and fixing push button any type and any size as per sample held in Sub Division, suitable to operate the synchronous motor manually, complete all as specified and directed.
S&F in repair Change over switch off load 415 volt TPN in sheet metal enclosure of capacity 63 amp, complete all as specified and directed.
S&F in replacement off load Change over switch, 4 pole 415 volts,100 Amps rating side handle opetated after dismantling and taking out of old change over switch of any capacity complete all as specified and directed.
S&F in repair 4 pole MCCB, 415 volts adjustable type, 100 Amps with breaking capacity 16 KVA complete all as specified and directed.
S&F LT panel locks with key to be fitted in existing doors of LT panels proper alignment for smoothing working as directed.
S&F and laying XLPE insulated, armoured heavy duty electric cable with aluminium couductor, 1100 volts grade, cross-sectional area 35sqmm 3.5 core complete all as specified and directed. Notes. (i)The Cost of thimbles/lugs and cable gland etc is including in this item and nothing shall be extra paid on this account. (ii) Excavation and earth work shall be measured and paid seperately under appropriate items of schedule of BoQ.
S&F and laying XLPE insulated, armoured heavy duty electric cable with aluminium couductor,1100 volts grade, cross-sectional area 25sqmm 3.5 core complete all as specified and directed.Notes. (i)The Cost of thimbles/lugs and cable gland etc is including in this item and nothing shall be extra paid on this account. (ii) Excavation and earth work shall be measured and paid seperately under appropriate items of schedule of BoQ.
S&F and laying XLPE insulated, armoured heavy duty electric cable with aluminium couductor,1100 volts grade, cross-sectional area 95 sqmm 3.5 core complete all as specified and directed. Notes. (i)The Cost of thimbles/lugs and cable gland etc is including in this item and nothing shall be extra paid on this account. (ii) Excavation and earth work shall be measured and paid seperately under appropriate items of schedule of BoQ.
Excavation in trenches not exceeding 1.5m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm in soils complete all as specified and directed.
Removing excavated material/surplus soil not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr here-in-before the starting point complete all as specified and directed.
Supply and laying Best quality, locally available, sub class ‘B’ burnt clay bricks (Old Size) for cable protection, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed by Engineer-in-Charge.
Material and Labour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified. (Note:- Punned thickness shall be considered for payment purpose)
Supply and fixing GI tube, 100 mm bore, light grade with all fittings/clamps of suitable size and nuts and bolts, including one coat of red oxide primer and painting two coats of synthetic enamel paint complete, fixed to walls, pole ceiling or laid in trenches for cable protection complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint on steel & iron surface of any description, not otherwise described, over 10cm width or girth including preparation of old painted surface by scrapping old paint with emery paper and smoothening the surface complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in Replacement installation, testing and commissioning of ALTERNATOR for generating set water cooled capacity 200 KVA, 415 Volts, 0.8 PF at NTP, mounted on common base platform with flexible coupling, 1500 RPM, alongwith sound proof enclosure as per GSR 37 (E) dated 17.05.2002 as amended from time to time DG set shall be capable of operating in temperature range of (-15° C to + 39 °C) and Best in Class Efficiency, Special Windings to Reduce Harmonics and Vacuum pressure Impregnation and epoxy gel coating on the winding including taking down old unserviceable alternator as specified and directed by Engineer-in-Charge. Note : The Contractor shall quote the cost of tools , plants and machinery for the complete installation . The rate of this aspect is included in this item and nothing shall be paid extra on this account.
Material and Labour for periodic inspection and servicing, to be carried out in every three months, and making/keeping the cranes serviceable, for cranes of 2/4 Ton capacity installed in various bldgs, including the following:- (i) LONG TRAVEL MOTION AND CROSS TRAVEL MOTION (a) Checking Gear box oil level and filling with required oil and rectification of leakages if any.(Note: Gear Oil shall be measured and paid separately at supply only rates) (b) Brake adjustment (c) Checking of Long travel & cross travel wheel for any noise/malfunctioning. (d) Checking grease of Geared couplings, nut tightening and replacement of grease nipple. (e) Checking of oil in Hydraulic thruster brake, rectification of leakages if any and filling with required quantity of oil.(Note: Brake Oil shall be measured and paid separately as supply only rates) (f) Checking of electric motor connections, insulation resistance value etc. (g) Checking the cut-off at extreme ends with the limit switch. (j) Checking and greasing of shaft pedestal. (ii) HOIST MOTION (a) Checking Gear box oil level and filling with required oil and rectification of leakages if any.(Note: Gear Oil shall be measured and paid separately at supply only rates) (b) Brake adjustment (c) Checking of main bearings of the Rope Drum including greasing the same (d) Checking grease of Geared couplings and nut tightening. (e) Checking of oil in Hydraulic thruster brake, rectification of leakages if any and filling with required quantity of oil.(Note: Brake Oil shall be measured and paid separately at supply only rates) (f) Checking of electric motor connections, insulation resistance value. (g) Checking wire rope for any damage & greasing the rope. (h) Adjustment of the rotary limit switch. (j) Checking of Bearing of the Hook and greasing the same. (iii) ELECTRICAL PANEL (a) Checking the contactors for overheating or flashing. (b) General checking of contacts and connections. (c) Cleaning of control panels and checking of connections. (d) Checking of connections of VVVF drives/other drive, calibrating VVVF drive to get smooth movement & maximum efficiency / other drives for smooth functioning of the same.
Supply only Gear oil 20W 90 OMD for topping up/ replacing complete all as specified and directed.
Supply only all purpose Grease for lubrication complete all as specified and directed.
Supply, laying/hanging, connecting PVC insulated PVC sheathed cable, FRLSH grade, unarmoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm 16 core 1100 Volts grade including SS gland etc for controlling crane motion complete all as specified and directed.
Supply and fixing in replacement flame proof limit switch for LT/CT motion suitable for 2 Ton capacity EOT crane complete all as specified and directed.
Supply and fixing in replacement brake liner of LT/CT/hoist brake lining suitable for 2 Ton capacity EOT crane complete all as specified and directed.
Labour only for locating the fault in EOT cranes/ Automatic Sliding Gate any capacity, make and type including rectification of minor defects such as tightening of nut & bolts, checking and rectifying loose connection of control panels, accessories and current collectors, replacing of fuse wire etc to keep the cranes functional complete all as specified and as directed. Note:- i) Supply only spare parts excluding minor parts will be measured and paid for under relevant items. ii) Contractor shall attend day to day complaint of crane regularly as and when called within 24 hours & maintenance shall be carried out accordingly for smooth functioning of crane . The rate of this aspect is included in this item and nothing shall be paid extra on this account.
Supply and fixing PVC insulated, SS woven wire rope of 4 sqmm dia suitable hanging application suitable for push button station including locking clamp etc complete all as specified and directed.
Supply, installation & commissioning in repairs microprocessor based wireless radio remote control (RRC)/crane control switch of dual speed, opertaing range approx 120 m from receiver panel of IP-54 protection for EOT crane having 12 function button, including 6 single speed button, + start and stop button (The transmitter shall be light weight, rugged, reliable and made from ABS plastic. It shall be operable from Ni-Cd rechargeable battery, which shall provide minimum 72 hours of operations with full charge. It shall be supplied housed in a protective leather cover), indicators, battery charger and other connected accessories etc complete all as specified and directed by Engineer-in-Charge.
Supply, installation, commissioning and testing in repairs Electron indoor/out door Temperature sensor with suitable flame proof cable minimum 10 m length and measuring range -20 to 50 degree celsius and other connected accessories etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron strip 25×4mm means of bolts, nuts check nut & washers of galvanised iron or steel & connected to main switch including complete excavation and earth work in soft/loose soil and disposal of surplus soil to a distance not exc 50 meters, PCC Chamber (1:3:6) type C-2 precast RCC cover with frame, funnel wire mesh, 20mm bore light grade galvanised iron or steel pipe for water, charcoal or coke and salt in alternative layers of 15cm compacted thickness all around the earth electrode complete all as shown in electrical plate No 3 of SSR part-I including welding with suitable electrode and testing complete all as directed. NOTE :- (i) Main earthing strip from earth plate electrode to test point upto length of 7.5 mtrs length shall be deemed to be included in the unit rate quoted against this item. (ii) M&L for tubing GI med grade 40mm dia for protection of earthing strip and passing the Road/passes and etc. shall be deemed to be included in the unit rate quoted against this item. (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department .
Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron strip 32×6mm means of bolts, nuts check nut & washers of galvanised iron or steel & connected to main switch including complete excavation and earth work in soft/loose soil and disposal of surplus soil to a distance not exc 50 meters, PCC Chamber (1:3:6) type C-2 precast RCC cover with frame, funnel wire mesh, 20mm bore light grade galvanised iron or steel pipe for water, charcoal or coke and salt in alternative layers of 15cm compacted thickness all around the earth electrode complete all as shown in electrical plate No 3 of SSR part-I including welding with suitable electrode and testing complete all as directed. NOTE :- (i) Main earthing strip from earth plate electrode to test point upto length of 7.5 mtrs length shall be deemed to be included in the unit rate quoted against this item. (ii) M&L for tubing GI med grade 40mm dia for protection of earthing strip and passing the Road/passes and etc. shall be deemed to be included in the unit rate quoted against this item. (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department .
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_837702.xls
BOQ • 5.64 MB
Tender_59T.pdf
Tender Documents • 0.58 MB
Download all tender documents and submit your bid