PROVN OF 42 X DESERT COOLER AT THE SIKH LI REGT CENTRE, FATEHGARH AND PROVN OF PARKING SHED AT TNSTC OF RRC AT FATEHGARH AND ADDN/ALTN TO ALUMINIUM DOORS OF ADM BLOCK AND OFFICER MESS AT THE SIKH LI REGT CENTRE FATEHGARH CANTT

Amount

Surface dressing n exc 15 cm deep in soft soil and site clearance complete all as specified and directed.

Excavating in trenches not exceeding 1.50M wide and not exceeding 1.50M depth for foundation etc or for shafts, wells, cess pits, manhole exc not exceeding 10 Sqm on plan and not exceeding 1.50M in depth and getting out in soft loose soil complete all as specified and directed.

Returning filling in including spreeding leveling watering and well ramming in layers n exc 25 CM complete all as specified and directed.

Filling under floors including spreading and levelling in layers n exc 25 Cm including well ramming and watering as required complete all as specified and directed.

Removing excavated materials n exc 50M and depositing where directed at a level n exc 1.50M above the startig point complete all as specified and directed.

M & L for cement concrete in foundation filling and mass concrete 1:4:8 type D-2 using 40 mm garded stone aggregate complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in CM 1:6.complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base to flooring complete all as specified and directed.

M&L Hardcore (broken stone) of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 10 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick Cement concrete type B-0 , 1:2:4 (12.5 mm graded aggregate) finishing cement concrete surface without using extra cement even and smooth including necessary form work complete all as specified and directed.

Forming 12mm thick expansion joint filled with pre formed bituminus filler and top 30mm primed and sealed with sealing compound grade B for 75 mm thickness of concrete complete all as specified and directed.

Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410-W (Gde E- 250) quality A ) complete all as specified and directed.

S&F tubular posts including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for plain cement concrete in post hole Type B2 1:2:4 ( 40 mm graded aggregate) complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide including preparation of steel surfaces over 10 cm in width or girth, not otherwise described complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame) of any description including making good of disturbed surfaces to portion of wall with new or old brick in lintel cill jambs etc including cement plaster in CM 1:4 complete all as specified.

S & F Anodised aluminium frame (powder coated of min thickness of 50 micron and section thickness not less than 2.00mm) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F for Anodised aluminium (powder coated of min thickness of 50 micron and section thickness not less than 2.00mm) door shutters, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each leaf, stainless steel hinges - 04 Nos on each leaf, anodised aluminum snap beading screws etc. complete all as specified.

S&F Aluminium alloy, anodised sliding door bolts 300mm long with hasp,staples( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified.

S&F Aluminium tower bolt 150 mm long, anodised barrel tower bolts of extruded section complete all as specified.

M&L for 4.8 to 5.5mm thick glass ordinary quality, glazing or black with aluminum beading and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified.

S&F of Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

M&L for Sheet glass 4.8 to 5.5 mm thick, ordinary quality and frosted or obscured with aluminum beading and gasket to aluminum framework in square exc 0.50 sqm in each pane complete all as specified.

S&F of Mortice lock, vertical type, size 100 mm mild steel 2 lever complete all as specified.

Supply and Installation of Desert cooler electric driven single phase 230 volts, fan motor capacity not less than 450 Watt, steel body havang nominal air flow and capacity of 6000 CuM per hours factory made GI sheet body 18 SWG and single panells of 22 SWG, water sump capacity not less than 70 Itrs, including three stepped speed regulator, water pump Submersible type of suitable capacity lSI marked, with and including of fixing float valve of size 15 mm dia, PVC connection of suitable size and GI union of same size, complete including electric connection complete all as specified and as directed. Note : Sufficient length of 3 core PVC sheathed round copper cable size 23/.0076 to enable fixing in to plug point shall be provided by Contractor.

S & F of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including fabrication & fixing on window wall complete all as specified and directed.

M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 2.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 2.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) in plastic laminated hylam sheet for housing/ fixing switche etc for desert cooler point controlled by one switch complete all as specified and directed. Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.

S&F Plug top 3 pin, 16 Amp complete all as specified and directed.

S&F switch socket combination 3 pin, 16 Amp flush type complete all as specified and directed

M/S WASEEM KHAN CONTRACTOR (BID ID -3511065)

M/S S P CONSTRUCTION (BID ID -3512870)