Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC A 102 GOLDEN SAND APARTMENTS GAZIPUR DHAKOLI ZIRAKPUR PB 160104 | ZIRAKPUR | S A S NAGAR | PUNJAB | 160104 | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹39.0 L+₹5.9 L (17.9%)Rejected-Finance 65 RANJEET NAGAR NEAR SAI HOSPITAL AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Being L2 |
Tender Value
Refer Docs
EMD Value
₹82,000
Closing Date
25 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Patiala
HQ CWE, Bldg No 26, New Lal Bagh, Patiala 147001
REPAIR TO CERTAIN ROADS UNDER AGE BR II OF GE NORTH PATIALA
2022_MES_533312_1
8322/PAT/T-13/E8
Open Tender
Civil Works
Item Rate
120 days
Patiala
As per cover 1
6 documents required · 6 mandatory
₹500
Yes
GE North Patiala
₹82,000
Yes
13 Aug 2022
24 Jun 2022
27 Jul 2022
24 Jun 2022
25 Jul 2022
14 Jul 2022
24 Jun 2022 - 1 Jul 2022
60 days
Amount
M/L preparing existing black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags and air compressor to remove all loose dirt etc from black top surface, Applying evenly a premix /tack coat with bitumen grade VG-10 @ 5.0 Kg per Ten Sqm complete all as specified and as directed.
Repairs to pot holes any depth not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scouring sunken surfacesin roads, path etc cutting edges at least 25 mm depth and making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed. Note :- Pot holes shall be marked by Engineer-in-charge before commencement of work and same shall be entered in MB after making good and before laying of bituminous premix carpet.
Providing and laying Premix Bituminous macadam of consolidated thickness n. exc. 50mm, using paving bitumen binder of grade VG-30 @ and binder content of 4% by weight of total mix with mixing of aggregates and VG-30 bitumen in electronic operated100-120 TPH batch type hot mix plant, transporting the hot mix from plant to work site by tippers and laying with hydrostatic paver finisher (Paver shall not be compulsory in case of patch work using B.M.) and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 504 MoRTH (5th Rev) specification and as specified and as directed. NOTES : 1. The contractor shall quote the rate against Item considering 4% VG-30 bitumen content. Job Mix Formula as per CI. No. 505.3.3 of MORTH (5th Rev) for BM shall be worked out from Thapar Insti. of Engg & Tech Patiala/NIT Kurukhshetra /PEC Chandigarh/CTL for obtaining optimum binder content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the GE for approval. Any variation in binder content on minus side shall be adjusted @ 42/kg of binder and no adjustment shall be made on plus side. 2. The BM shall be covered with top layer/wearing course within in a maximum of 48 hours. If there is to be any delay, by the contractor the surface shall be applied with bitumen grade VG 10 @ 5.0 Kg per Ten Sqm as required vide Clause 512 of MORTH (5th Rev) before opening to the traffic and the same shall be considered incidental to the work and shall not be paid for separately. 3. Only packed paving bitumen VG-30 shall be used and same shall also be verified by GE on ground before start of execution of work.
Providing and laying Premix Bituminous concrete 30mm consolidated thickness with 5.5% binder (paving bitumen of grade VG-30) content by weight of total mix and crushed aggregates of grading 2 with mixing of agrgregates and VG-30 bitumen in electronic operated100-120 TPH batch type hot mix plant, transporting the hot mix from the plant to work site by tippers and laying with hyrdostatic paver finisher and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification and as specified and directed. NOTES : 1. The contractor shall quotes the rate against Item considering 5.5% VG-30 bitumen content. Job Mix Formula as per CIause. No. 505.3.3 of MORTH (5th Rev) for BC shall be worked out from Thapar Insti. of Engg & Tech. Patiala/ NIT Kurukshetra/ PEC Changigarh/ CTL for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the GE for approval. Any variation in binder content on minus side shall be adjusted @ Rs 42/kg of binder and no adjustment shall be made on plus side. 2. Cost of filler i.e. cement (Ordinary portland cement/OPC) is deemed to be included in quoted unit rate. 3. After spreading of mix as per clause 507.4.7 entire surface during the operation shall be rolled with road roller 8-10 tonne (smooth wheeled) followed with vibratory road roller of 8-10 tonne static weight, followed by finished rolling with 6 to 8 tonne smooth wheel tendom roller as per Clause Nos. 507.4.8 and cost of the same is deemed to be included in quoted unit rate. Note for Serial item No 2 to 4: The bidder shall upload copy of MoU on non judicial stamp paper of Rs 500 with any firm/ owner of established Batch Mix Plants and other equipment which required for road work alongwith proof of holding plants and equipment of latest technology. Industry of Batch Mix Plant should comply all the directions/ rules instructions as may be issued by the MOEF/CPCB/SPCB from time to time.
Marking strips, straight line, Zebra crossing and stop line not less than 2.5mm thick with hot applied thermoplastic road marking paint of make Shivalik (Prismo) (white or yellow) by using automatic mechanical road painting machine and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips on road surfaces complete all as specified and as directed.
S&F in repair road cat eye 90X110x17mm meeting with ASTM and MoR&TH standards with yellow reflector yellow body colour and two side lens all as specified. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per manufacturers recommendation complete all as specified and as directed.
S&F in repair Metal Tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4, type B1, (150 x 150 x 300mm) including necessary excavation and earth work complete all as specified and as directed.
S&F in repair Road convex mirror of size 600mm fixed with stainless steel pole of size 50mm dia with grouting in PCC 1:2:4 type B2 of 300 x 300 x 300mm in base of minimum height 1.75m complete all as specified and as directed.
Dismantling of bricks (laid flat or on edge) or bricks tiles in floor, bedded and pointed in any mortar etc of any description complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness below or above ground level complete all as specified and as directed.
M&L for 100 mm thick cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate as in sub base of floor / path complete all as specified and as directed.
Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS-15658-2006 of 80mm thickness M-40 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified.
M&L for Factory made rubber moulded pre-cast cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate in kerb stone with plain fair faces, including chamfers, weathering throating etc and setting in cement mortar 1:4 complete with joints to match including necessary excavation, embedding in the ground to depth indicated and tamping ground around and also for removing any surplus spoil to a distance n.exc 50 mtrs complete all as specified and as directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete reinforced (reinforcement cut t as required to facilitate demolition) complete all as specified and as directed.
M&L 100 mm thick Ready Mix Concrete (RMC) work in pavement of flexural strength 45 kg/sq cm using minimum 400 kg of cement / cubic meter as per design mix with and including non circular polyester fiber @ 0.25% by weight of cement in pavement including necessary form work, finishing surfaces of concrete pavements by brooming etc complete all as specified and as directed. NOTE : (i) Construction joints, contraction joints and expansion joints shall be measured and paid seperately under respective items. (ii) Deduction shall be made in computing concrete quantity for expansion joints. (iii) No price adjustment shall be applicable for variation in excess quantity of cement content if used / approved in execution of work under this item. (iv) Beam Tests for flexure strength shall be carried out as per MoRTH 5th Rev without any additional financial effect to the department. (v) Laying of PQC will be done in alternate panels.
M&L for Wearproof topping 15 mm thick as specified (incorporating and including approved metallic floor hardner), laid on concrete floor and pavings, and finished even and smooth complete all as specified and as directed.
M&L for forming 20mm wide expansion joint to full depth of concrete slab filled with polyurethane joint sealant compound Grade 'B' using mechanical means to a depth of 12 mm (depth minimum above the back up rod) with minimum performance guarantee of 10 years and minimum movement accommodation factor (MAF) + 30% conforming to the requirement of BS : 5212, BS-4254 and EN-141875-2003 for Hydrolysis / water resistance test including two coats of primer and providing 25 mm dia (approved quality cosed cell polythene back up rod separated by bond breaker type) over polymer board in position as required all as per Manufacturer's Instructions and as directed including raking out existing joints and removal of existing sealing material outside defence land complete all as specified.
M&L for forming 10 mm wide and 25 mm deep construction joint filled with polyurethane joint sealant compound Grade 'B' using mechanical means to a depth of 10 mm (depth minimum above the back up rod) with minimum performance guarantee of 10 years and minimum Movement Accommodation Factor (MAF) + 30% conforming to the requirement of BS : 5212, BS-4254 and EN-141875-2003 for Hydrolysis / water resistance test including two coats of primer and providing 12 mm dia (approved quality cosed cell polythene back up rod) over joint filler board in position, applying masking tape on edge of joint to prevent accidental slippage of sealant on top surfaces and to give neat finish to the sealant and removing the masking tape after sealant is applied as required and directed including raking out existing joints and removal of existing sealing material outside defence land complete all as specified and as directed.
M&L for forming 65 mm deep and 10 mm wide construction (Dummy) joint (using diamond cutter) and filled with polyurethane joint sealant compound Grade 'B' using mechanical means to a depth of 10 mm (depth minimum above the back up rod) with minimum performance guarantee of 10 years and minimum Movement Accommodation Factor (MAF) + 30% conforming to the requirement of BS : 5212, BS-4254 and EN-141875-2003 for Hydrolysis / water resistance test including two coats of primer and providing 10 mm dia (approved quality cosed cell polythene back up rod) over joint filler board in position, applying masking tape on edge of joint to prevent accidental slippage of sealant on top surfaces and to give neat finish to the sealant and removing the masking tape after sealant is applied as required and directed including raking out existing joints and removal of existing sealing material outside defence land complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base of path or hard standing complete all as specified and as directed.
BAL SINGH & SONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .