ADDITION ALTERATION AND SPECIAL REPAIRS TO BUILDING NO. 2008 2009 WET CANTEEN UNDER GE I RND RCI HYDERABAD

Amount

Demolition of Cement concrete ( including existing roof treatment) (unreinforced) (other than ground floors) as in roofs, floors, beams, staircases, landing, chajjas and similar suspended works complete all as specified and as directed an removing to low laying area as directed by Engineer-in-charge.

M&L for laying padding concrete type B0 (1:2:4) (using 12.50mm graded stone aggregate) in roof slab to maintain proper slope complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement mixed with liquid water proofing compound @ 2% by weight of cement or as per manufacturer's instructions complete all as specified and directed. Note: Liquid water proofing compound shall be measured and paid separately under relevant item of this BOQ

Supply and laying APP modified polymeric membrane having 3 mm thick APP (Atactic Polypropylene Polymer) modified pre-fabricated five layer, weight not less than 3.5 kg/Sqm water proofing membrane, black finished re-inforced with non woven polyster matt @ 160 gms / Sqm make as approved laid over bituminus primed surface @ 0.3 Kg / Sqm by torching method with 100mm side and end lap on other layers and Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm and painted with two coat of bitumenous aluminium paint @ 0.10 ltr / Sqm, membrane shall be laid using butane torch and sealing all joints etc complete as all specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal faces of grooves with cement mortar 1:3 after inserting membrane into the groove complete all as specified and directed.

M&L for PCC (1:2:4), type B1 (using 20mm graded stone aggregate) as in roof kerbs or covings, rounded or chamfered on edges, including necessary formwork complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M&L double charged vitrified tiles 8-9mm thick light coloured shade (Square/rectangular) polished, area of each tile not exceeding 0.36 Sqm laid in floors etc., over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L glazed 300 x 450 mm tiles 8-9mm thick light coloured shade (Square/rectangular) polished as in dado etc., including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for 20mm thick, approved pre-polished Granite work (of any type, table rubbed and polished) edges rounded in steps, cooking platform etc., including screed bed or bedding layer 15mm thick in CM (1:4) and pointing with mixture of white cement and marble dust in (1:2) proportion mixed with admixture of pigment to match with shade of stone complete all as specified and as directed.

M&L for 18 to 20mm thick machine cut coloured granite, factory polished, in wall lining, (veneering to wall) over 12mm thick backing coat in CM (1:3) and pointing with mixture of white cement and marble dust in (1:2) proportion mixed with admixture of pigment to match with shade of stone complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20 to 25mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed or bedding layer 20mm thick in cement mortar 1:4and pointing with mixture of white cement and marble dust in (1:2) proportion mixed with admixture of pigment to match with shade of stone complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4), type B0 (using 12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and pre cast concrete articles complete all as specified and as directed.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls from any height including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4, on fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for cut open visible cracks of external wall over 0.5mm size to 'V' groove by mechanical means, clean properly with water to remove dirt/dust etc., & filling the groove with smartcare Hybrid PU sealant complete as per manufacturer recommendations. Make: Asian/Fosroc/Pidilite Note: This item shall be executed by Authorised manufacturer/applicator after taking prior approval of GE.

S&F 110mm dia PVC (SWR) pipes, fixed to walls including taking down old unserviceable pipes complete all as specified and as directed.

S&F 110 dia PVC (SWR) bends with oval access door complete all as specified and as directed.

S&F stack clamps suitable for 110mm dia pipes of any description complete all as specified and as directed.

M&L for mild steel rolling shutters, thickness of laths 1.25mm, with out ball bearing including top hood cover, anchoring rod, hasp and staple and one shop coat of primer on both sides, erected in position as indicated, complete including taking down old unserviceable shutter complete all as specified and directed.

S&F Ball bearing suitable for rolling shutters including taking down old unserviceable one complete all as specified and directed.

M&L for mild steel shaft 125 to 150mm dia (heavy grade) suitable for rolling shutters of any size including necessary cutting, welding, drilling holes and fixing of existing bearings and other mounting accessories complete all as specified and directed.

S&F Rolling shutter motor along with push button, side brackets, chain sprocket and washer in any location suitable for rolling shutter of weight not exceeding 600Kg including taking down old unserviceable motor complete all as specified and directed. Make: Jielong or equivalent as approved by GE

M&L for preparation of new plastered surfaces of walls and applying 1mm thick (average) wall care putty including rubbing and making smooth surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls including cornices, pilasters, soffits of slabs and chajjas and applying two coats of exterior emulsion paint over a coat of primer as per manufacturers instruction complete all as specified and directed. Make: Asian paints (Apex ultima)/ Berger Paints (Weather coat all guard) /ICICI (Weather shield max)

M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS:15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces.

M&L for complete removal of existing treatment of walls and ceiling including cornices, pilasters etc., applying 2mm thick Birla wall care putty as per manufacturers instructions and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed. Make: Asian paints (Apex ultima)/ Berger Paints (Weather coat all guard) /ICICI (Weather shield max)

M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint ( Rolling shutter) complete all as specified and as directed.

M&L preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for powder coated (minimum 50 micron thickness of powder coating/anodisation) for doors, windows, ventilators, partitions, door shutters, window shutters with beading/glazing clips including fabrication complete to receive 5 mm thick sheet glass and 12 mm thick pre-laminated particle board including taking out old unserviceable sections complete all as specified and directed.

M&L for aluminium powder coated (minimum 50 micron thickness) door shutters, aluminium sections weighing not less than 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

M&L for aluminium powder coated (minimum 50 micron thickness) sliding window 2/3 track including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and locking arrangments etc. complete all as specified and directed.

M&L for 5 mm thick sheet glass ordinary quality, area exc 0.50 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed complete all as specified and directed.

M&L for pre laminated particle board, exterior grade 12 mm thick, pre-laminated both sides wih decorative choice lamination complete all as specified and directed.

M&L for 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

M&L for 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M&L for 100mm size stainless steel butt hinges, medium weight complete all as specified and directed.

M&L for 150mm size extruded aluminium anodized handles, fabricated type complete all as specified and directed.

M&L for 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

M&L for Brass Mortice lock 4 levers, vertical type, size 100 mm long with duplicate keys complete all as specified and directed. Make: GODREJ/EUROPA/SHEEL/HARRISON

M&L for standard EPDM/Neoprene rubber beading for fixing of glass partition complete all as specified and directed.

M&L for Metallic Fibre Accoustical Suspended Ceiling System with MINA TUFF (MICRO LOOK) EDGE TILES WITH SILHOUTTE EXPOSED GRID of 600x600x12mm thick board. The tiles should have Humidity Resistance (RH) 0f 99%, NRC Upto 0.6, Light Reflectance 88%, Thermal conductivity K=0.052-0.057 w/m K, Colour white, Fire performance Class I (BS476 part 6 & &) in module size of 600x600x16mm with Bio Block coating on the face of the tile, impact resistant and suitable for Green Building application, with recycled content of 63%. The tile shall be laid on Silhouette profile grid system with 15mm white/block colour and with a web height of 38mm and load carrying capacity of minimum 11.68 Kgs/Sqm. Silhouette, Main Runners & Cross Tees to have mitred ends & "birdsmouth" notches to provided mitred cruciform junctions including taking down old unserviceable ceiling complete all as specified and directed. Make: Armstrong/ Saint Gobain

Taking down aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc., and removing and making good disturbed surface of walls, floors etc., to match with existing surfaces complete all as specified and directed.

M&L, Point wiring complete with FRLSH PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit, medium grade, of minimum 20mm dia (ISI marked) and conduit accessories concealed in walls/floors /ceilings/roofs etc., including making necessary chases in walls and making good to match with existing surface with and including modular metal flush boxes made out of 1.6mm GI steel sheet with modular plate and frame for mounting of switches, socket outlets, regulators etc., complete including provision of FRLSH PVC insulated unsheathed 1.5 Sqmm multi-stranded copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for one light point controlled by one 5 Amps one way modular switch. NOTE: The cost of metal flush boxes, frames and modular white cover plates deemed to include in the unit rate quoted.

All as per Serial item No. 54 here-in-before but for one fan point controlled by one 5 Amps one way modular switch.

All as per Serial item No. 54 here-in-before but for one Exhaust fan and wall mounting fan point controlled by one 5 Amps one way modular switch and fan regulator.

All as per Serial item No. 54 here-in-before but for one 3 pin modular socket out let, 6 Amps on same board controlled by one 5 Amps one way modular switch .

All as per Serial item No. 54 here-in-before but for one 3 pin modular socket out let, 6 Amps on independent board controlled by one 5 Amps one way modular switch.

All as per Serial item No. 54 here-in-before but for 6/16 Amps socket outlet with 2.5 Sqmm PVC insulated copper conductor cable including 2.5 Sqmm PVC insulated copper conductor cable (green in colour) as earth continuity conductor and connected to common earth dolly complete all as specified and as directed.

All as per Serial item No. 54 here-in-before but for AC point wiring and 20 Amps socket socket outlet with 4.0 Sqmm PVC insulated copper conductor cable including 4.0 Sqmm PVC insulated copper conductor cable (green in colour) as earth continuity conductor and connected to common earth dolly complete all as specified and as directed.

M&L for modular switch one way 6 Amps, one module 240V, single pole complete all as specified and directed.

M&L for modular switch one way 16 Amps, one module 240V, single pole complete all as specified and as directed.

M&L for modular socket, 6A - 2/3 pin combination, 2 module complete all as specified and directed.

M&L for modular socket, 6A/16A - 2/3 pin (5 pin) combination 2 module complete all as specified and directed.

M&L for ceiling rose two to three terminals, surface backelite type AC 50 HZ 230 Volts complete all as specified and directed.

M&L for recess mounting 34W, 2x2 LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs complete with all accessories including driver pre-wired including taking down of old light fitting complete all as specified. Make: HAVELLS Cat No. VENUSNEOHE2X2PLR18-42WLED857MODUGR<19 or PHILIPS Cat No. RC 380 B LED 43 S-6500 G5 L60 W60 PSU OD or Techno commercially equivalent in Wipro. complete all as specified and directed.

M&L for flat panel 4x1, 36 watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories including taking down of old light fitting complete all as specified. Make: HAVELLS Cat No. PLANOSURFACE4X1PLS42WLED 857S or techno commercially equivalent of PHILIPS/WIPRO

M&L for LED tube light fitting 20 W, 230V batten type, single side connection included with 20 watt LED luminaire complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable sizeincluding taking down of old light fitting complete all as specified and directed. Make: Havells CAT No LUMILINEBS20WLED865SPCWH or equivalent in Philips / Wipro

M&L for LED Highbay less than 120W powder coated light fitting suitable for suspension mounting at any height in Hangers/Workshop with aluminum alloy pressure die cast housing and control gear box with high efficiency long life LEDs with lumen output ≥ 125lm/W, system lumen output not less than 15000lm, CCT 5700 K or above with specified beam angle to ensure better uniformity of light distribution, IP65 Protection and impact resistance of IK07, built in electronic driver, lower THD, open circuit protection, over surge and voltage protection complete with all accessories including taking down of old light fitting complete all as specified. Make: HAVELLS Cat No. SAUCERGENXPROHBP120WLED 757P90DBOLTG or Techno commercially equivalent in WIPRO/PHILIPS

M&L for 70 LED Flood light made up of pressure diecast aluminium housing with arcylic cover as diffuser with IP66 protection made impact resistance of IK07 with 10KV built-in surge protection device of capacity 10KA complete in replacement of conventional fitting of any type complete all as specified and directed. Make: HAVELLS Cat No. JETAALBAFLOODLIGHT70W or technically equivalant in PHILIPS/WIPRO

M&L for Modular fan step regulator, 120W, 2 Module complete all as specified and directed.

M&L for CRCA sheet metal enclosure with metal clad plug and socket single phase with five pin and earth plug & socket suitable for surface/flush mounting, 240 V, 20 Amps capacity controlled by and including one 20 Amps MCB SP, 10 KA capacity including taking down old metal enclosure complete all as specified and as directed.

M&L for single pole and neutral sheet metal enclosure, 8 way, double door for MCB’s, Phosphatised powder coated with bus bar of 200 Amps rating, 240 Volts AC including taking down of old DB complete all as specified and as directed.

M&L for sheet metal enclosure for pre-wired distribution board double door, powder coated VTPN, 4 way with out MCCB, three phase 415 volt with 100 Amps rated tinned electrolytic copper bus bar with neutral link including taking down of old DB complete all as specified and directed.

M&L for MCCB, TP, 100 Amps capacity, 16KA, 415 Volts, 50 Hz including taking down of old MCCB complete all as specified and directed.

M&L for MCB, SPN, 40 Amps capacity, 10 KA, 240 Volts 50 Hz including taking down of old MCB complete all as specified and directed.

M&L for MCB, SP, 10 kA, 6 to 32 Amps capacity, 240 Volts, 50 Hz including taking down of old MCB complete all as specified and directed.

M&L for MCB, TP, 10 kA, 40 Amps capacity, 415 Volts, 50 Hz including taking down of old MCB complete all as specified and directed.

M&L for CRCA sheet metal enclosure with metal clad plug and socket, three phase with five pin and earth plug & socket suitable for surface/flush mounting 415 V, 32 Amps capacity controlled by and including one 32 Amps MCB TPN, 10 KA capacity including taking down of old metal enclosure complete all as specified and directed.

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated and unsheathead 1100V grade FRLS multistranded copper conductor and drawn through and including PVC conduit of medium grade and conduit accessories of suitable size concealed in walls and making good disturbed surface and/or laid on surfaces over ceilings/columns etc and connecting terminal ends to DBs including of 1 run of 6 Sq.mm insulated multistranded FRLS copper cable as earth continuity conductor (green in colour) and connecting to common earth dolly including taking out old wiring complete all as specified and directed (Sub DBs). Note:- (i) Two runs of 6 Sqmm copper conductor, one run of 6 sqmm copper earth continuity conductor and one run of suitable size of PVC rigid conduit and required conduit accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same.

M&L for sub main wiring complete with 2 runs of 2.5 Sqmm PVC insulated and unsheathead 1100V grade FRLS multistranded copper conductor and drawn through and including PVC conduit of medium grade and conduit accessories of suitable size concealed in walls and making good disturbed surface and/or laid on surfaces over ceilings/columns etc and connecting terminal ends to DBs including of 1 run of 2.5 Sq.mm insulated multistranded FRLS copper cable as earth continuity conductor (green in colour) and connecting to common earth dolly including taking out old wiring complete all as specified and directed (For building security light). Note:- (i) Two runs of 2.5 Sqmm copper conductor, one run of 2.5 sqmm copper earth continuity conductor and one run of suitable size of PVC rigid conduit and required conduit accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same.

M&L for sub main wiring complete with 4 runs of 6 Sqmm PVC insulated and unsheathead 1100V grade FRLS multistranded copper conductor and drawn through and including PVC conduit of medium grade and conduit accessories of suitable size concealed in walls and making good disturbed surface and/or laid on surfaces over ceilings/columns etc and connecting terminal ends to DBs including of 1 run of 6 Sq.mm insulated multistranded FRLS copper cable as earth continuity conductor (green in colour) and connecting to common earth dolly including taking out old wiring complete all as specified and directed (Sub DBs). Note:- (i) Two runs of 6 Sqmm copper conductor, one run of 6 sqmm copper earth continuity conductor and one run of suitable size of PVC rigid conduit and required conduit accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same.

M&L for Earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI wire 4mm dia as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed. Note: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 15mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 446 of SSR Part-II.

Taking down Split/Window AC 1.5 Ton/2 Ton capacity of and keep in safe custody, replacement of copper tubing suction and liquid line from indoor to out door unit and refixing the same in service condition and Top up/ Gas charging with refrigerant gas (R-22) after vacuuming & leak testing including brazing suction/discharge line and testing including necessary electrical connections complete all as specified and directed.

Bismi Engineering

M/S PAVANI ENTERPRISES

Anjana corporation

Richcon Engineers

M/S GDR CONSTRUCTIONS

SM CONSTRUCTIONS

shyam engineerings

BHAGYARAM ENTERPRISES