Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.8 LAccepted-AOC NO 5 3 JJ KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | TAMIL NADU | 600014 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹39.7 L+₹2.3 L (6.07%)Rejected-AOC HOUSE NO 105 PANTHEERMA VILLAI NEAR NELLIKKAVILLAI CSI CHURCH VELLAYAMBALAM VENCODE P O KANYAKUMARI DIST TAMIL NADU 629 171 | VENCODE | KANYAKUMARI | TAMIL NADU | 629171 | L2 | Rejected-AOC Not Lowest Bidder | |
| 3 | L3₹40.0 L+₹2.5 L (6.72%)Rejected-AOC | L3 | Rejected-AOC Not Lowest Bidder | |
| 4 | L4₹43.7 L+₹6.3 L (16.8%)Rejected-AOC NO 42 SIVAN STREET SRI VENKATESAPERUMAL NAGAR VALASARAVAKKAM CHENNAI 600087 | CHENNAI | CHENNAI | TAMIL NADU | 600087 | L4 | Rejected-AOC Not Lowest Bidder | |
| 5 | L5₹44.9 L+₹7.5 L (19.9%)Rejected-AOC | L5 | Rejected-AOC Not Lowest Bidder |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
21 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, St.Thomas Mount
Garrison Engineer, St.Thomas Mount, Old MH Complex, Rudra Road, Chennai-600 016
ADDN/ALTN TO BLDG NO.P-154 AT 100 ORS MD ACCN, PROVN OF PCC PATH/PAVEMENT FOR CERTAIN BLDGS AT 100 ORS MD ACCN AT NANDAMBAKKAM AND ADDN/ALTN THREE STAFF TOILETS AT BLDG NO.P-353 AT APS CHENNAI UNDER GE STM
2023_MES_624440_1
8377-ADDN/ALTN TO BLDG NO.P154 AT 100 ORS MD ACCN
Open Tender
Civil Works
Item Rate
180 days
GE STM
As per tender documents
6 documents required · 6 mandatory
₹500
Garrison Engineer, St.Thomas Mount
₹97,000
Yes
12 Jan 2024
20 Oct 2023
30 Nov 2023
20 Oct 2023
21 Nov 2023
7 Nov 2023
20 Oct 2023 - 30 Oct 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below or above ground level)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified.
M&L non skid coloured ceramic tiles each tile area (square/rectangle) exc 0.06Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer with CM 1:6, 15mm thick for laying floor finishes all as specified .
M&L glazed ceramic tiles coloured 350x 250x7mm/ 450X 350X 7mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.incl 10mm thick in CM 1:4 as backing coat for fixing dado tiles all as specified.
M&L Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust, etc., brushing neat cement slurry with 3.0kg of cement per Sqm
M&L plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring 40mm thick finished even and fair.
M&L non skid ceramic coloured tiles, area of each tile exc 0.18Sqm and n.exc 0.38Sqm (square/rectangle) 7 to 8mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick cement screed in CM 1:6 all as directed.
M&L non skid ceramic coloured tiles, area of each tile exc 0.18Sqm and n.exc 0.38Sqm (square/rectangle) 7 to 8mm thick on vertical surfaces as in skirting incl 10mm thick CM 1:4 as in backing coat of dado/skirting
M&L rubber moulded finish chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment incl 15mm thick cement screed bed in CM 1:6
M&L for 75mm thick PCC (1:3:6) Type C2 (using 40mm graded aggregate) as in plinth protection/hard standing finishing cement concrete surface even and smooth without using extra cement.
M&L brickwork with fly ash bricks old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4
Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting not exc 10 cm girth
Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer die 20mmm complete including taking down all as specified as specified
Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 25mm complete including taking down all as specified as specified
Supplying and laying of brass Elbow (3/4 x 1/2) of 16mm for CPVC pipe outer diameter of 20mm
Supplying and laying of brass elbow for CPVC pipe outer diameter of 20mm
Supplying and laying of brass Tee for CPVC pipe outer diameter of 20mm
Supplying and laying of brass elbow for CPVC pipe outer diameter of 25mm
Supplying and laying of brass Tee for CPVC pipe outer diameter of 25mm
S&F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc, complete all as directed
S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed,
M&L in repairs 10 litres capacity PVC low level flushing cistern including flush pipe complete with ISI marked body and ISI marked syphon
S&F PVC connections 15 mm size with PTMT nuts of length 450mm all as directed
S&F in repairs bib cock, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified
S&F in repairs bib cock two way double Handle with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as in repairs all as specified.
S&F in repairs fancy type chromium plated angle cock long body
S&F in repairs CP wall mixer 2 in 1 for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe.
S&F in repairs swan neck bib taps for sink chromium plated, screwed down, high pressure, with or without lettered with long screwed shanks and fly nuts, screwed for 15 mm bore
S&F in repairs pillar taps, fancy taps chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore
S&F in repairs stainless steel Soap Dish
S&F Towel rail 600mm long & including Chromium plated brass screws & wooden / plastic cleats (Minimum weight 190gms)
S&F in repairs Chromium plated brass 125mm shower rose with or without swivel joints, any size, including fixing to steel pipe or union
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm including 40mm dia brass cp waste coupling.
S&F in repairs kitchen plate rack made stainless steel 0.8mm thick complete of size not less than 900x750x200mm, duly assembled and fixed to wall with wall screws / fasteners all as specified and directed
M&L for machine cut Granite slab 20mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete nosing edges including 20mm thick cement screed in CM 1:6 all as directed.
M&L for Rounding to edges of stones slab one edge, such as in steps, cooking platform and other similar situation
S&F in repairs 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement
S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
M&L for 75mm PVC (SWR) pipes of Type 'B' single socketed in any length with rubber ring joints, fixed to walls
M&L for 75mm PVC (SWR) pipes of Type 'B' single socketed in any length with rubber ring joints, laid in floors / trenches
S&F PVC (SWR) bends any radius 75mm bore with access door
S&F PVC (SWR) vent cowl 75mm bore
S&F PVC (SWR) branch piece, single (single T) equal or unequal 75mm with access door
M&L for 110mm PVC (SWR) pipes of type 'B' single socketed in any length with rubber ring joints, laid in trenches or in floors
M&L for 110mm PVC (SWR) pipes of type 'B' single socketed in any length with rubber ring joints, fixed to walls
S&F PVC (SWR) bends any radius 110mm bore with access door
S&F PVC (SWR) vent cowl 110mm bore
S&F PVC (SWR) branch piece, single (single T) equal or unequal 110mm with access door
S&F rotational moulded polyethylene triple layered water storage tanks 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms complete all as specified including dismantling of existing water old water tank and credit offer to contractor.
S&F of 20mm brass ball valves high pressure with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (Minimum weight 25mm-455gms)
S&F 20 mm bore gun metal globe or gate, valves with iron screwed both ends for iron pipe & fixed
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition)
M&L Mild steel TMT bars of 6mm to 8mm dia and over of grade Fe 500, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming all as specified.
M&L providing precast cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in cover slabs, shelves and set in cement mortar 1:4 complete with joints to match all as specified. Note :- Reinforcement shall be measured and paid separately.
M&L for Reinforced cement concrete (Nominal mix) of Type B1 1:2:4 (20mm graded stone aggregate) as in slabs supported by walls all as directed
M&L Use and waste formwork to soffits of suspended slabs such as roof slabs, landings, rough finished surfaces of concrete flat
Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each
Taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq. m each
Taking down shutters of any description n.exc 1.00 Sqm each
Taking down shutters exc 1.00 Sqm and n.exc 2 Sqm each.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile mentions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile mentions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
M&L second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers.
S&F for factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and both glass/gauzed pane glazing bead of appropriate dimension (Area of window any Sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed. Note:- Glass/gauzed shall be paid separately. For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows.
M&L for Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads.
M&L Figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane
S&F in repairs prelaminated particle board, Exterior grade, prelaminated both sides with decorative choice lamination, 18/19 mm thick, fixed with screws to timber frame work as in shelves/ cupboard shutters and partitions
M&L 6mm thick teak wood lipping for external of 18/19 thickness of board
S&F 100mm Hasp & staple, safety type, aluminium with mild steel hinges pin including bolt to hinges plate & fixed with screw
S&F FI for hold fasts Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers & similar small articles conforming to Fe 290 Gde E-165
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in opening including making good to the jambs as per specification all as directed. Note: The quote rate shall be inclusive of following:- (i) Existing/new wall edges shall be finished properly in cement plaster in CM 1:4 including supply and fixing of 6 Nos wooden plugs for catch door frame size not exc 17 sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS chromium plated Screw, 3 each on either side
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing
S&F stainless steel curtain rods of 25mm dia (Drapery rods) heavy duty all as specified and as directed
S&F stainless steel brackets for 25mm dia curtain rods all as specified and as directed
S&F stainless steel decorative finials for 25mm curtain rods all as specified and as directed
Treating ends of posts, back of chowkats, etc., area tarred exc 0.1 sq.m but n exc 0.5 sq.m. each treated with tar or coal tar black paint
S&F SS butt hinges,100mm medium weight, cold rolled
S&F 100mm butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22
S&F extruded aluminium alloy handles,150mm fabricated type anodized
S&F extruded aluminium alloy handles,125mm fabricated type anodized
S&F Aluminium, 150mm anodized, barrel tower bolts extruded section
S&F Aluminium, 100mm anodized, barrel tower bolts extruded section
S&F Aluminium alloy, anodized, 250mm sliding aldrop bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy
Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete.
Dismantling wrought iron or mild steel work of any description not otherwise provided
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed
S&F mild steel work in rafter, purlins, struts etc confirming to Fe-290(Grade E-165) complete using tubes conforming to I. S.1161- 1979 complete all as specified.
M&L preparation of new steel surface over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer.
Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, in hard/dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, incl removing surplus soil all as specified
M&L for PCC 1:3:6 type C2 using 40 mm graded aggregate as in foundations, filling and mass concrete all as specified
S&F mild steel work in post, confirming to Fe-290(Grade E-165) all as specified
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in- charge.
S&F Supply and fixing factory made uPVC white colour top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm,sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 Sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed complete all as specified Note:- Glass shall be measured and paid separately
Taking down cement or cement lime plaster, on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water, etc.any description.
M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces of wall in CM 1:6 finished even and smooth without using extra cement.
M&L Rendering 15 mm thick in CM 1:4 on wall mixed with water proofing compound as per manufacturers instruction, finished plastered surface even and smooth w/o using extra cement. Note: WPC will be measured and paid separately.
M&L rendering 10mm thick on fair faces of concrete surfaces of ceiling in CM 1:3 finished even and smooth without using extra cement.
Complete removal of existing treatment washing, rubbing down and stopping two coats of white wash any description on wall surfaces.
M&L applying two coats of oil bound distemper white or tinted on walls complete over a coat of wall primer and two coats of wall care putty to obtain uniform smooth surfaces all as specified and as directed
M&L applying two coats of exterior emulsion weather proof paint over one coat of external wall primer over two coats of exterior wall care putty all as specified and as directed.
M&L preparing newly plastered surfaces of ceilings and applying three coat of white wash to match with the existing surfaces.
M&L preparing newly plastered surfaces of walls and applying two coats of Oil bound distemper on untreated plastered surfaces of walls over a coat of wall putty and primer including necessary preparation of surfaces all as specified and as directed.
M&L preparing newly plastered surfaces of walls and applying two coats of exterior grade weather proof paint on untreated plastered surfaces of walls over a coat of putty and primer including necessary preparation of surfaces all as specified and as directed
Preparing of old ceilings surfaces and applying one coat of white wash to match with the existing surfaces.
M&L painting new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer including preparation of surfaces.
M&L Preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint.
Preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint .
Removing the existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per sq.m. Complete all as specified and as directed. remove all the debris from site and rubbish off the premises complete
M&L 25mm average thick, PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate as in levelling course over the roof slab all as directed
M&L 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement all as directed.” Note : WPC shall be measured and paid separately.
Supply only Liquid water proofing compound
Preparing the surface thoroughly to remove all loose particles, direct/dust particles and applying blown grade bitumen VG 10 @ 1.2 kg/Sqm confirming to IS 702 over a coat of bitumen primer @ 0.40 litres/Sqm followed by APP membrane reinforced with polyester non woven fabric 3 mm thick weighing not less than 3.6 kg/Sqm laid on primed surface by forced torch application followed by a finishing coat of solar reflective aluminium painting @ 0.10 kg /Sqm complete all as specified and as directed. Note: The work shall be carried out by authorized applicators of manufacturers
Demolition brick work built in cement mortar including all quoins, arches Pillars etc.
M&L plain cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete all as specified.
M&L Brick work with fly ash bricks old size straight or curved on plan exc 6 mean radius, built in cm 1:4.
M&L Extra for forming fair finished to drains or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil
Demolition and breaking up 150 mm dia (salt glazed ware, AC or Reinforced concrete) pipe jointed in cement mortar and disposed off the premises all as directed.
M&L PCC 1:3:6, type C2 (using 40mm grade stone aggregate) to drain pipes including forming cradles after they are laid and tested, for 150mm bore all as specified
M&L reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 and tested as specified.
Returning, filling in, including spreading, levelling, watering & well ramming in layer s not exc 25 cm complete.
Removing excavated material to a distance exceeding 50 mtr and not exceeding 500m and depositing out of the defence premises at a level up to distance of 1.5 km above the starting point.
Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard dense soil all as specified
M&L brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6
M&L PCC 1:2:4 type B1 using 20mm graded aggregate as in coping and benching incl weathering slightly rounded or chamfered angles and throating as directed including form work all as directed.
M&L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders all as specified
M&L for providing 75mm thick, PCC 1:5:10 type E2 using 40 mm graded stone aggregate as in sub base of floors and pavings etc. all as specified and as directed
Demolition of brick work or stone/boulder masonry, built in cm incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles
S&F 10 liters capacity PVC low level flushing cistern complete with ISI marked body and ISI marked syphon (Make shall be Parryware Slimline or equivalent)
S&F pillar cock, fancy type chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore
S&F Bib cock two way double Handle with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15mm bore for brass ferrule and fixed all as specified
S&F PVC (SWR) bends 110mm bore
S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms)
Complete removal of existing treatment and applying two coats of Oil bound distemper over two coats of wall putty and alkali resistant primer over plastered and other surfaces of walls including necessary preparation of surfaces all as specified and as directed.
Taking down carefully copper/ Aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit.
M & L for Wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 cm girth ,including Provn of 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-
(a) One light point controlled by one switch.
(b) One ceiling fan point controlled by one switch and one regulator.
(c) One exhaust fan point controlled by one switch and one regulator.
(d) One 3 pin 5 Amps switch socket on independent board.
(e) One 3 pine 5 amps switch socket on same board along with other switches.
(f) One bell point controlled by bell push switch on independent board.
(g) One light point controlled by two 2 way switches.
All as per item No. 141 herein before but with 2.5 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board.
Taking down sub main wiring (or)power wiring complete upto of 6 Sqmm to 10 Sqmm including PVC conduit removing to stores or taken as credit and making good the disturbed surfaces of wall, etc all as directed.
M&L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 Sqmm including one run of 6 Sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories incl accessories fixed on wall/ceiling etc., or concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly all as specified and directed. Note: (a) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (b) For concealed wiring the quoted rate shall be inclusive wherever required cutting chases etc.
Taking down carefully by unscrewing from boards/outlet boxes, wall ceiling fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, with plug, switch fuse and regulators etc., taken as credit and making good the disturbed surfaces of wall etc all as directed.
Supply & Fix Ceiling rose 6A 240V 3 plates, 3 terminals PVC/ Polycarbonate body.
Supply and Fix Switch piano flush type 5 amps single pole, one way, 240 Volts all as directed.
Supply and Fix Switch socket outlet 3 pin, 5 amp, flush type all as directed.
Supply and Fix Bell push flush type 5 amps single pole 240 Volts all as directed.
Supply and Fix Bell ding dong, AC, 230 volts, single pole all as directed.
Supply and Fix Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch all as directed.
S&F stepped type electronic fan regulator flush type all as directed.
Supply & Fix Lamp holder PVC/Polycarbonate type with back plate batten fittings.
Supply and fixing highly efficient LED Bulb 9 W with B 22 caps.
Labour only for taking down carefully existing LED lights fitting 1x 22 W, keeping in store with safe custody and refixing after rewiring including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Taking down carefully existing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt keeping in store with safe custody and refixing after connecting up with three core flexible copper conductor cable of suitable size complete.
Labour only for taking carefully existing round shape LED 10/12 watt recessed type fittings & keeping in store with safe custody and refixing after connecting up with three core flexible copper conductor cable of suitable size complete three core flexible copper conductor cable of suitable size complete.
Labour only for taking down carefully existing LED light fitting 1x9W/1X10W bulkhead luminaries & keeping in store with safe custody and refixing after connecting up with three core flexible copper conductor cable of suitable size.
Removing the existing ceiling fan from site and refxing serviceable ceiling fan after completing painting complete all as specified and directed.
M&L painting of Ceiling fan complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust including marking of MES No complete all as specified and directed.
S&F Sheet metal enclosure for MCB DB single pole and neutral 240 volts, double door, 12 way with 200 amps rated bus bar.
S&F RCBO single pole & neutral, 240 volts, 40 amps, 30mA, 10kA all as directed.
S&F MCB single pole 240 volts, 6 to 32 amps all as directed.
Removing old building security lights, supply and fixing energy saving LED security light fitting 30W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection complete all as specified and directed.
Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.
S&F Switch modular flush type 6 amps single pole, one way, 240 Volts
S&F modular socket outlet 5 pin universal, 6 amp, 2 module flush type.
S&F Modular cover plate with frame 3 Module
S&F Modular cover plate with frame 4 Module
S&F Modular Metal box flush mounting box 3 Modules
S&F Modular Metal box flush mounting box 4 Modules
Supply and fixing LED lights fitting 1x 22W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete .
Supplying, installing and testing of exhaust fan Metal Body300 mm sweep heavy duty 900 RPM complete fixed to wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with three core flexible cable of size 24/0.2mm with copper conductor from ceiling rose to exhaust fan. complete all as specified and as directed.
DJ Group
Sree Gokul Enterprises
SWIFTTECH ENGINEERS INDIA PVT LIMITED
Kaadosh Real Estates Pvt Ltd
BESPOKE ENGINEERING
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .