Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹12.5 LAccepted-AOC 01 KHUMRIYAL KUPWARA KHUMRIYAL KUPWARA KUPWARA JAMMU KASHMIR 193223 | KUPWARA | JAMMU AND KASHMIR | 193223 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹17.2 L+₹4.1 L (31.5%)Rejected-Finance | L-2 | Rejected-Finance Other than L-1 | |
| 3 | L-3₹19.1 L+₹6.0 L (45.9%)Rejected-Finance | L-3 | Rejected-Finance Other than L-1 | |
| 4 | L-4₹19.3 L+₹6.2 L (47.1%)Rejected-Finance | L-4 | Rejected-Finance Other than L-1 | |
| 5 | L-5₹20.2 L+₹7.1 L (54.1%)Rejected-Finance | L-5 | Rejected-Finance Other than L-1 |
Tender Value
₹27.5 L
EMD Value
₹55,000
Closing Date
30 Dec 2024, 6:00 pmClosed
Maj Sanjay Siwach, GE
GE 970 EWS C/o 56 APO PIN-913970
Repair and maint of wooden furniture incl polishing at OAF, Manasbal, Haft Chinar and Sonamarg under GE 970 EWS.
2024_MES_686853_1
GE 970 EWS-66/2024-25
Open Tender
Miscellaneous Works
Item Rate
180 days
HAFT CHINAR, MANASBAL AND SONAMARG
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹55,000
Yes
13 Feb 2025
3 Dec 2024
4 Jan 2025
3 Dec 2024
30 Dec 2024
17 Dec 2024
Amount
Chair Dining (FD-279) M&L for taking out old unsv components as follows from Chair Dining and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing, complete all as specified and as directed.
Front legs
Rear legs
Front rails/ Side rails/ Back rails
Back rest
Stiffeners
Chair Easy (FD-229) M&L for taking out old unsv components as follows from Chair Easy and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed by Engr-in-charge.
Front legs
Rear legs
Side /Front / Back Rail of seat and back
Chair Writing FD-280) M&L for taking out old unsv components as follows from Chair Writing and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing, complete all as specified and as directed.
Front legs
Rear legs
Front / Side / Back rails
Back rest
Stiffeners
Material & Labour for cutting of unsv plastic cane and re-canning of various types chairs and other articles with half round plastic cane 2 mm wide 0.4mm thick in Godrej pattern for seat and back as required. complete all as specified and as shown on drawing, complete all as specified and as directed.
Chair Dining Officers (FD/E6/MAP/10) M&L for taking out old unsv components as follows from Chair Dining Officers and supply & fixing New Components as per Shape and size as existing made out of well seasoned 1st class teak wood, complete all as specified and as directed.
Front legs
Rear legs
Front/ Back/ Side Rails
Back rest
Vertical stripsof back rest
Stiffner
M&L for taking out old unserviceable cushion seat and S&F cushion seat of 75 mm thick, 32 density foam with 12 mm thick plywood bottom covered with superior quality tapestry cloth cover stitched to make good shape (Tapestry cloth cost not less than Rs.350/- per metre) complete all as specified and directed. Note: Colour & pattern as approved by GE/Engineer-in-Charge.
M&L for taking out seat with old soiled/ torn seat cover from the chair and cover the cushion with superior quality tapestry cloth cover stitched to make good shape (Tapestry cloth cost not less than Rs.350/- per metre), complete all as specified and directed. Note: Colour & pattern of tapestry cloth as approved by GE/ Engineer-in-Charge.
Chair Dining JCO/Ors (FD/MAP-II/05) Taking out old unsv components as follows from Chair Dining JCO/ORs and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing, complete all as specified and as directed.
Front legs
Rear legs
Front / Back / Side rails
Back rest
Stiffeners
PVC Seat 4mm thick with holes screwed with rails.
Chair Wooden Bottom (FD-56/225) Taking out old unsv components as follows from Chair WB and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing, complete all as specified and as directed.
Front legs
Rear legs
Side / Front / Back rails
Back rest
Stiffeners
Seat made of 6mm thick plywood commercial BWR grade.
Chair Easy cushioned (FD-358) M&L for taking out old unsv components as follows from Chair Easy and S & F new Components as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing, complete all as specified and as directed.
Front legs
Rear legs
Side /Front / Back Rail of seat and back
M&L for removing the unserveceable Seat and S & F new one with 6 mm thick plywood commercial 75 mm thick foam cushion of 32 density with upholster with leatherised Raxene of approved shade and testure including re-fitting/tightening the frame with bamboo pins, fevicol etc. for Chair easy cushioned. All as per drawing, complete all as specified and as directed. Drg No FD-358.
M&L for removing the unserveceable Back and S & F new one with 12 mm thick plywood commercial 50 mm thick foam cushion of 32 density with upholster with leatherised Raxene of approved shade and testure including re-fitting/tightening the frame with bamboo pins, fevicol etc. for Chair easy cushioned. , complete all as specified and as directed. Drg No FD-358.
Sofa set Five/ Four / Single seater (FD-281, FD/MAP-II/02) M&L for taking out old unsv components as follows from Sofa set 5/4/ single seater and S& F new components as per shape and size as existing made out of well seasoned 1st class teak wood shown on drawing, complete all as specified and as directed.
Seat Rails Right and left of Sofa set (Single Seater)
Seat Rails Front and Back of Sofa set (Single Seater)
Rails of back frame Top and bottom of Sofa set (Single Seater)
Back and bottom support of Sofa set (Single Seater)
Long rails of seat front and back of Sofa set (Three Seater)
Long rails of Back frame Top and bottom of Sofa set (Three Seater)
Long Back and bottom support of Sofa set (Three Seater)
Legs of Sofa Single seater/Three seater
Arms of Sofa set.
Bearers of Seat and Back of Sofa set.
M&L for replacement of old worn out cushion of sofa set and S & F new cool foam cushion 32 density, 100 mm thick with superior quality tapestry cloth cover duly stitched to make good shape (Tapestry cloth not less than Rs.350/- per metre) complete all as specified and directed. Note: Colour & pattern of tapestry cloth as approved by GE/ Engineer-in-Charge. Cushion shall be brought to BSO furniture yard in company packing for approval by Engineer-in-charge and then stitched in yard under supervision of Supervisor (B/S), complete all as specified and as directed. .
M&L for removing cover from used cushions of sofa set and stitching with new tapestry cloth cover of good quality, duly stiched making good shape (Tapestry cloth not less than Rs. 350/- per Mtr) shade and type of fabric to be approved by the GE, complete all as specified and as directed.
Table Bed side (MAP) (FD/E6/MAP/15 ) M&L for taking out unsv components as follows from Table Bed side (MAP) and supply & fixing new components as per shape and size as existing. The wooden part shall be made of 18 mm thick Pre laminated particle board teak face or commercial plywood of approved make, complete all as specified and as directed.
Top with PVC/ TW edging .
Bottom portion of upper and lower drawers.
Front portion of upper drawers with PVC/ TW edging ..
Front portion of lower drawers with PVC/ TW edging .
Sides of upper drawer.
Sides of lower drawers.
MS Frame work made of 18 mm MS square pipe (18 Gauge) painted with black colour enamel paint over a coat of primer
Back side cover made of 6 mm thick commercial ply wood.
Rubber Shoes for legs.
Teapoy (FD-232/ 278) M&L foraking out old unsv components as follows from Teapoy and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing, complete all as specified and as directed.
Long Rails
Short Rails
Stiffner
Table Peg (FD-236/ 277) M&L for taking out old unsv components as follows from Table Peg and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing, complete all as specified and as directed.
Long Rails
Sort Rails
Stiffner
Table Writing (FD-275) M&L for taking out old unsv components as follows from Table Writing and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing, complete all as specified and as directed.
Top side long rails
Top side short rails
Stiffners
Drawers.
Shutter of cupboard fixed with continues piyano hinges.
6 mm thick commercial ply on back and side of cupboard.
New side of 4 mm thick teak veneer ply.
Table Centre/ Table Centre Two Tier (FD-274) M&L for taking out old unsv components as follows from Table Centre and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood , complete all as specified and as directed.
Short Rails/ Stiffner
Long Rails / Stiffner
Rails of bottom tier
Table 900 mm x 600 mm with/ without drawers. Table 900 mm X 900 mm wooden, Table 600 mm X 600 mm wooden (FD- 283/ 284/ 291/ 293) M&L for taking out old unsv components as follows from various tablesas above and supply & fixing new components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing , complete all as specified and as directed.
Short Rail / Short Stiffners
Long Rail / Long Stiffners
Drawer.
Table Dining 4/ 6/ 8 Persons (FD-273 & FD/MAP-II/03) M&L for taking out old unsv components as follows from Table Dining 4/ 6/ 8 Persons and supply & fixing new components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing, complete all as specified and as directed.
Short Rail
Long Rail
M&L for removing of existing unserviceable top of table of any type and supply and fixing of new top of same size made out of 17/18 mm thick both side pre laminated exterior grade MDF board grade-I with ISI marked including 4mm teak wood beading all around fixed to board with good quality adhesive and headless nails duly polished complete all as specified and directed.
Table Dressing Ladies with Mirror (FD-251 / 378) M&L for taking out old unsv components as follows from Table Dressing Ladies and supply & fixing new components as per Shape and size as existing complete all as specified and shown on drawing, complete all as specified and as directed.
Looking mirror of 5mm thick.
New Frame and back membrane of the mirror including back side 6 mm thick commercial plywood.
Legs made of first class HW teak.
Top made of 18mm thick pre-laminated particle board teak face providing 4mm thick Teakwood beading on exposed sides.
Drawers made out of 12 mm thick plywood with front side having 18mm thick pre-laminated particle board teak face providing 4mm thick Teakwood beading on exposed sides.
Glass panes shutters 5 mm thick alongwith aluminium channel and glass runners.
Back / Bottom made of 12 mm thick plywood.
Table Dressing Gents with Mirror ( FD-230) M&L for taking out old unsv components as follows from Table Dressing Gents and supply & fixing new components as per Shape and size as existing complete all as specified and shown on drawing, complete all as specified and as directed.
Looking mirror 5mm thick.
Frame & back membrane of the mirror including back side 6 mm thick commercial plywood.
Drawers made out of 12 mm thick plywood with front side having 18mm thick pre-laminated particle board teak face.
New Top made out of 12 mm thick pre-laminated particle board teak faced and providing 4 mm thick Teakwood beading on front side.
Table Dressing Ladies with Stool (FD/MAP-II/07) Taking out old unsv components as follows from Table Dressing Ladies with Stool and supply & fixing new components as per Shape and size as existing made out of well seasoned 1st class teak wood and 18mm thick pre laminated particle board teak face all as specified and shown on drawing , complete all as specified and as directed.
New looking mirror.
New Frame and back support of the mirror including back side 6 mm thick commercial plywood.
New Top made of 18mm thick pre-laminated particle board teak faced and providing 4mm thick Teakwood beading on all exposed sides.
New drawers providing 4mm thick Teakwood beading on all exposed sides and provided with stainless steel moving telescopy.
New shutter of doors providing 4mm thick Teakwood beading on all exposed sides fixed to the frame with SS piano hinges.
Side of stool providing 4mm thick Teakwood beading on all exposed sides.
Openable shutter made out of 12 mm thick commercial plywood fitted with MS folding Handle.
50 mm dia heavy duty revolving nylon wheel of stool.
75 mm thick foam cushion 40 density covered with superior quality tapestry duly stiched on four sides making good shape (Tapestry cloth not less than Rs.350/- per mtr) colour & pattern as approved by GE, complete all as specified and as directed.
Dressing Mirror Gents ( FD/E6/MAP/16) M&L for taking out old unsv components as follows from Mirror dressing gents and supply & fixing new components as per Shape and size as existing complete all as specified and shown on drawing, complete all as specified and as directed.
Looking mirror 5 mm thick.
Frame & back membrane of the mirror including back side 6 mm thick commercial plywood.
Back of cabinet made out of 12 mm thick plywood.
Side of cabinet made out of 18 mm thick pre-laminated particle board teak faced and providing 4 mm thick Teakwood beading on front side.
Glass shelves of 5.5 mm thickness
Hat Stand with Mirror (FD-233) M&L for taking out old unsv components as follows from Hat stand and supply & fixing new components as per Shape and size as existing complete all as specified and shown on drawing , complete all as specified and as directed.
Looking mirror 5mm thick.
4 mm thick plywood one side teak face on front.
Aluminium Pegs 100 mm long
Teak wood edging of size 6 x 35 mm alround the hat stand
6 mm thick commercial ply wood ISI marke for back side.
TV Trolley (FD/E6/MAP/06(R)) M&L for taking out old unsv components as follows from TV Trolley and supply & fixing new components as per Shape and size as existing complete all as specified and shown on drawing , complete all as specified and as directed.
Top made out of 18 mm thick pre-laminated particle board teak faced providiing 4 mm thick TW beading duly polished as per existing size and shape.
All as per Srl item No 23.01 above but side of TV trolley.
All as per Srl item No 23.01 above but sliding pull out tray of TV trolley.
All as per Srl item No 23.01 above but sliding drawer of TV trolley
All as per Srl item No 23.01 above but bottom of TV trolley.
Telescopic channel for tray/ drawer
Glass shutter, stainless steel fitting (two Nos) and push type magnetic catcher.
Twin wheel castors
Table Computer (FD/E6/MAP-03) M&L for taking out old unsv components as follows from Table computer and supply & fixing new components as per Shape and size as existing complete all as specified and shown on drawing , complete all as specified and as directed.
Top made out of 18 mm thick pre-laminated particle board teak faced providiing 4 mm thick TW beading duly polished as per existing size and shape.
All as per Srl item No 24.01 above but side of Table computer.
All as per Srl item No 24.01 above but key board tray.
All as per Srl item No 24.01 above but mouse tray of table computer.
All as per Srl item No 24.01 above drawer of table computer.
Telescopic channel of mouse tray/ key board tray/ drawer.
PVC Shoe/ cap of frame.
Bed Plywood top (FD-246) M&L for taking out old unsv components as follows from Bed plywood top and supply & fixing new components as per Shape and size as existing complete all as specified and shown on drawing , complete all as specified and as directed.
Head board with legs and outer frame made out of teak wood and the inner portion of frame made out of deodar wood covered with 4 mm thick one side teak face ply of exterior grade.
All as per Srl item No 12.01 above but foot board
Plywood 12mm thick, BWR grade 7 ply.
Long rail made of Sal wood.
Stiffener made of TW joining the long rails.
Side Board (FD-241/ 1112) M&L for taking out old unsv components as follows from Bed plywood top and supply & fixing new components as per Shape and size as existing complete all as specified and shown on drawing , complete all as specified and as directed.
Top made out of 19mm thick pre-laminated particle board irrespective what is shown on drawing.
Back made out of 6 mm thick commercial plywood.
Drawer with front of drawer made of 19mm PL particle board, side and back made of 12mm thick commercial ply and bottom of drawer shall be of 6mm thick plywood commercial.
Shutter made out of 19mm thick pre-laminated particle board teak face including provision of continuous piano hinges.
New Hardwood stiffner
New Legs made of Hardwood.
Bin Linen Multipurpose (FD/E6/MAP/09) Taking out old unsv components as follows from Bin Linen Multipurpose and supply & fixing new components as per Shape and size as existing made out of well seasoned 1st class teak wood and 18mm thick pre laminated particle board teak face of make-Bhutan/Novopan/Archid all as specified and shown on drawing, complete all as specified and as directed.
New Top with 4mm thick Teakwood beading on all exposed sides.
New drawers with 4mm thick Teakwood beading on all exposed sides and provided with stainless steel moving telescopy.
New shutter with 4mm thick Teakwood beading on all exposed sides fixed to the frame with SS piano hinges.
New partition of cupboard.
New 25X25 mm Hardwood stiffner
New Legs made of Hardwood.
Back made out of 6 mm thick commercial plywood.
Book case (FD- 237) Taking out old unsv components as follows from Book case and supply & fixing new components as per Shape and size as existing made out of well seasoned 1st class teak wood and 18mm thick pre laminated particle board teak face all as specified and shown on drawing, complete all as specified and as directed.
New Top/ bottom with 4mm thick Teakwood beading on all exposed sides.
New shutter with 4mm thick Teakwood beading on all exposed sides fixed to the frame with SS piano hinges.
New side/ partition with 4mm thick Teakwood beading on all exposed sides
Back made out of 6 mm thick commercial plywood.
New 40X25 mm Hardwood stiffner
New Legs made of Hardwood.
Stool Dressing cushioned (FD/E6/MAP/14) M&L for taking out old unsv components as follows from Stool Dressing cushioned and supply & fixing new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing, complete all as specified and as directed.
Long Rails
Short Rails
Stiffner
Top made out of 12 mm thick commercial plywood.
75 mm thick foam cushion 40 density covered with superior quality tapestry duly stiched on four sides making good shape (Tapestry cloth not less than `.350/- per mtr) colour & pattern as approved by GE, complete all as specified and as directed.
S&F knob as per approved sample on various furniture articles with appropriate size machine screws complete all as specified and directed.
S&F Handle as per approved sample on various furniture articles with appropriate size machine screws complete all as specified and directed.
S&F magnetic catcher as per approved sample on various furniture articles with appropriate size screws complete all as specified and directed.
S&F Nylon/ PVC buffer as per approved sample on various furniture articles with appropriate size screws complete all as specified and directed.
S&F key plates as per approved sample on various furniture articles with appropriate size screws complete all as specified and directed.
S&F lock with double keys as per approved sample on various furniture articles with appropriate size screws complete all as specified and directed.
Material & Labour for two coats of French polish of best quality on old surfaces after preparation of old surfaces of various furniture articles complete all as specified as shown on drawing , complete all as specified and as directed for following furniture.
Chair Dining (FD-279)
Chair Easy (FD-229)
Chair Writing (FD-280)
Chair Dining Officers (FD/E6/MAP/10)
Chair Dining JCO/Ors (FD/MAP-II/05)
Chair Wooden Bottom (FD-56/225.)
Chair Easy cushioned (FD-358)
Sofa set Five seater (FD-281, FD/MAP-II/02)
Sofa set Four seater (FD-281)
Sofa Single seater (FD-281)
Sofa Three seater long piece (FD-281)
Table Bed side (MAP) (FD/E6/MAP/15 )
Teapoy Wooden (FD-232/ 278)
Table Peg ( FD-236/ 277)
Table Writing (FD-275)
Table Centre (FD-274)
Table Centre two tier (FD-274)
Table 900 mm x 600 mm with drawers (FD-283)
Table 900 mm x 600 mm without drawers (FD-284)
Table 900 mm x 900 mm wooden (FD-291)
Table 600 mm x 600 mm wooden (FD-293)
Table Dining 4 Persons (FD-273 & FD/MAP-II/03)
Table Dining 6 Persons (FD-273 & FD/MAP-II/03)
Table Dining 8 Persons (FD-273 & FD/MAP-II/03)
Table Dressing Ladies with Mirror (FD-251 / 378)
Table Dressing Gents with Mirror ( FD-230)
Table Dressing Ladies with Stool (FD/MAP-II/07)
Dressing Mirror Gents ( FD/E6/MAP/16)
Hat Stand with Mirror (FD-233)
TV Trolley (FD/E6/MAP/06(R))
Table Computer (FD/E6/MAP-03)
Bed plywood top (FD-246)
Side Board (FD-241/ 1112)
Bin Linen Multipurpose (FD/E6/MAP/09)
Book case (FD- 237)
Stool Dressing cushioned (FD/E6/MAP/14)
Stool Dressing CB (FD-282)
Table Bed side (FD- 276)
Table Card (FD- 91(M))
Board Notice various size (FD- 99(M))
Notes :- An amount of ` 63,766.00 on account of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum
M/S HARJEET ENTERPRISES (BID ID -3196144)
MEHAK STEEL INDUSTRIES (BID ID -3196458)
M/S B A Traders (BID ID -3196557)
DUKE CONSTRUCTION (BID ID -3193948)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .