NIT No. 13 Item 09

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly,energy efficient ready to use pack. 18W LED 6000K Make:Havells/ Bajaj/ Crompton /any other approved make of DJB.

New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and Impact resistance of IK07 45W LED Make: Havells/ Bajaj/Crompton / HPL/any other approved make of DJB.

Supply of Air circulator wall fan 600 mm size. Make: Havells/ Crompton/ Almonard /Any other approved make of DJB.

Supply of Pedestal Fan 600 mm

Supply of ceiling fan 1200 mm Make: Havells / Crompton/ Usha / Khaitan / Any other approved make of DJB.

Supply of Exhaust Fan 380 mm Make: Havells/ Crompton/ Usha/ Khaitan/ Any other approved make of DJB.

Supply of Exhaust Fan 450 mm Make: Havells/ Crompton/ Usha/ Khaitan/ Any other approved make of DJB.

ITC for pre-wired fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. Directly on ceiling / wall including connection with 1.5 mm FR PVC insulated, copper conductor, single core cable and earthing etc. as reqd.

Fabrication / Supply and installation of G.I Bend which is twisted to 105 degree angle 1.0 mtr long “B” class 35mm dia. / Suitable size dia. for street lights duly aluminum painted suitable for outer diameter of lights with the help of clamp and fasteners.

I/T/C of air circulator on the wall at appropriate height at required places in P/House with the help of fasteners, wiring, connections etc. as required. The job also includes fixing of SP MCB with enclosure taken above i/c connections etc. with individual air circulator for operation.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, connection, testing, commissioning etc. as required. Upto 450 mm sweep.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as

MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections,

MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as

RISHABH ENGINEERS

HARI ELECTRICAL CO.