REPAIR AND CONVERSION OF CHARPOY GI NYLON NEWAR TO CHARPOY GI HARD TOP FOR OTM/MD ACCN UNDER GE (I) KANPUR

Amount

CHARPOY GI PIPE NYLON NEWAR (FD-220) S&F following components of Charpoy GI pipe including dismantling unservicable one complete all as specified and directed. (a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy.

S&F 3 way 32 mm dia GI elbow ISI mark complete all as specified and directed.

S&F Check nuts of 32 mm dia complete all as specified and directed.

Conversion of 32 mm dia long rail obtained from item No 1 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow complete all as specified and directed.

Conversion of 32 mm dia short rail obtained from item No 4 above into two numbers leg including fixing to 3 way 32 mm dia after one end threaded complete all as specified and directed.

Removing old unserviceable/rusted MS Plate and S/F new MS Plate of size 900mmx40mm x 5mm duly painted with black colour after applying red oxide after making two Nos hole complete all as specified and directed.

M&L for removing old Nylon Newar and S/F New 12 mm BWR phenol bonded commercial plywood of size 2020 mm x 900 mm including providing 900mmx40mm x 5mm MS plate two Nos (duly painted with black colour after applying red oxide primer) for support with 12 Nos heavy duty Nut and bolts(75mmx6).Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per Drawing No FD-220 before fixing the ply top complete all as specified and directed.

M&L for removing old plywood and S/F New 12 mm BWR phenol bonded commercial plywood of size 2020 mm x 900 mm including providing 900mmx40mm x 5mm MS plate two Nos(duly painted with black colour after applying red oxide primer) for support with 12 Nos heavy duty Nut and bolts(75mmx6).Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per Drawing No F-220 before fixing the ply top complete all as specified and directed.

REPAIR TO BED HARD STEEL (MAP) (FD/E6/MAP/08 (R) ) M&L for preparation of old steel surfaces by of Bed Hard steel scraping with emery paper, cleaning, redusting, making the surfaces smooth finishing and one coat of synthetic enamel paint of approved shade of approved make & quility on all steel surfaces inside and out side of Bed Hard steel complete all as specified and directed.

M&L removing of unserviceable ply top and supply & New S/F 1980mm X 900mm X 12mm thick BWR plywood conforming to IS 303 of 1975 fixing with nuts & bolts complete all as specified and directed.

M&L removing of unserviceable head board and supply & fixing new head board made of 18/19 mm thick pre-laminated partical board with PVC edge beading and fixing with suitable size of screws complete all as specified and directed.

M&L removing of unserviceable foot board and supply & fixing new foot board made of 18/19 mm thick pre-laminated partical board with PVC edge beading and fixing with suitable size of screws complete all as specified and directed.

M&L for removing unserviceable/broken toe rubber shoes from Bed Hard steel and S & F new rubber shoes of approved make and quality complete all as specified and directed.

REPAIR TO BED PLYWOOD TOP (FD-246/247) M&L for removing the old / broken front head legs from bed plywood top and S&F new legs made out of 2nd class teak wood and made to shape all as shown on drg complete all as specified and directed.

M&L for removing the old / broken rear foot legs from bed plywood top and S&F new legs made out of 2nd class teak wood and made to shape all as shown on drg complete all as specified and directed.

M&L for removing unserviceable head board from Bed plywood top and S & F new head board 4mm thick plywood one side teak face (Natural teak) to both side of head board including 15mm wide 6mm thick teak wood round beading providing for both side of the head board and 35mm wide 4mm thick teak wood beading for top head board complete all as specified and directed.

M&L for removing unserviceable Foot board from Bed plywood top and S & F new Foot board 4mm thick plywood one side teak face (Natural teak) to both side of foot board including 15mm wide 6mm thick teak wood round beading providing for both side of the foot board and 35mm wide 4mm thick teak wood beading for top foot board complete all as specified and directed.

M&L for removing unserviceable long rail from Bed plywood top and S & F new long rail made out of 2nd class teak wood and made to shape complete all as specified and directed.

M&L for removing unserviceable short rail from Bed plywood top and S & F new short rail made out of 2nd class teak wood and made to shape complete all as specified and directed.

M&L for removing unserviceable centre supporitng stiffner from Bed plywood top and S & F new centre supporting stiffner made out of 2nd class teak wood and made to shape complete all as specified and directed.

M&L for removing unserviceable / wornout existing plywood from Bed plywood top and S&F new 12mm thick plywood BWR grade of size 1940 X 905mm approved make and fixing it by minimum 18 Nos brass screw for each bed complete all as specified and directed.

S&F triangular shape corner bracket size 70mm X 70mm long and 15mm thick made out of 1st class teak wood to be fixed to legs to long rail of Bed plywood with 50mm wood screw 2 Nos for each bracket and all as specified in drg complete all as specified and directed.

REPAIR OF CHAIR DINING CUSHIONED (FD/E6/MAP/10 & 10(R) ) M&L for removing old unserviceable/ wornout cushion and tapestry cloth from Chair Dining and supply of new cushion of foam with 40 density and fixed on Plywood 12mm commercial BWR as approved by GE and covered with tapestry cloth of approved shade & quality over a cover of lining cloth duly covered and stitched over the cushions complete all as specified and directed. (Note : Cost of the tapestry cloth incorporated in the work shall be of not less than Rs. 240/- per meter)

S&F new triangle bracket of teakwood 2"x2"x2" and fixing with Fevicol and brass Nails to Legs and Rails of chair dining cushioned complete all as specified and directed.

M&L for removing old unserviceable/ broken front leg of chair dining cushion and S&F of new leg of teakwood complete all as specified and directed.

M&L for removing old unserviceable/ broken rear leg of chair dining cushion and S&F of new leg of teakwood complete all as specified and directed.

M&L for removing old unserviceable/ broken front or back rail of chair dining cushioned and S&F of new rail of teakwood complete all as specified and directed.

M&L for removing old unserviceable/ broken side rail of chair dining cushioned and S&F of new rail of teakwood complete all as specified and directed.

M&L for removing old unserviceable/ broken Triangle bracket of chair dining cushion and S&F of new Triangle bracket for resting cushioned seat, made of teakwood and fitting with brass screws complete all as specified and directed.

M&L for removing old unserviceable/ broken Stiffner complete of chair dining cushion and S&F of new Stiffner of teakwood complete all as specified and directed.

M&L for removing old unserviceable/ broken back support rail of chair dining cushion and S&F of new back support rail of teakwood complete all as specified and directed.

M&L for removing unserviceable hard Rubber shoes from bottom of legs of chair dining cushion S&F hard Rubber ring/shoes duly screwed complete all as specified and directed.

REPAIR OF CHAIR CB STEEL WITH ARMS AND WITHOUT ARMS (FD-75 (M) ) M&L for removing unserviceable seat & back from chair CB steel with arms & without arms and S & F new seat made out of first class teak wood and canned with 2mm wide and 0.3mm thick plastic cane white/cream colour and 4mm wide 0.4mm thick plastic cane for all round the border including french polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat complete all as specified and directed for the following:-

Seat of Chair CB steel with arms

Back of Chair CB steel with arms

Seat of Chair CB steel without arms

Back of Chair CB steel without arms

S&F for hard rubber shoes to steel chairs bottom of legs in shape complete all as specified and directed.

S&F for hard rubber plug shoes to steel chairs on open end of conduite pipe shape complete all as specified and directed.

M&L for removing unserviceable/broken arms from chair CB steel with arms and S&F new arms made out of 2nd class teak wood and handle shall be french polished and fixed to the chairs CB steel with arms with suitable wooden screws, and complete all as specified and directed.

GUJRAL BUILDERS (BID ID -3234354)

ANAND FURNITURE (BID ID -3233023)

Star Sofa House (BID ID -3234428)