PROVN OF HIGH EFFICIENCY PARTICULATE AIR FILTER FOR OPERATION THEATRE OF 65 MH PROVN OF SOLAR WATER PUMP AND CONNECTED ITEMS IN E ZONE ADDN ALTN OF ELECTRICAL WIRING AND CONNECTED ITEMS IN BLDG NO OP T 430 IN R ZONE, PROVN OF 55 X EXHAUST FAN IN JCO

Amount

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.

M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. of suitable size as required at site complete all as specified and as directed for the following:

One light/fan point controlled by one, one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin socket outlet 5 Amps on the independent board.

All as per item No.2 here-in-before but with 2.5 Sqmm for 3 pin 15 Amps switch socket point on independent board along with one run of 2.5 Sqmm copper conductor green in colour as earth continuity conductor connected to earth dolly complete all as specified and as directed.

S&F Switch piano flush type single pole, one way 5A complete all as specified and as directed.

S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and as directed.

S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and as directed.

S&F Switch Socket combination, 2 in 1, 6 pin 6A/16A flush type complete all as specified and as directed.

S&F stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed.

S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/square block complete all as specified and as directed.

S&F LED light fitting 1 x 20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size including taking down unserviceable flexible hose from ceiling rose to fitting complete all as specified and as directed.

S&F for LED light fitting 1 x 10W (2 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size including taking down unservioceable flexible hose from ceiling rose to fitting complete all as specified and as directed.

Supply , fixing and testing of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection wuth and including bracket made out of 25mm bore light grade GI pipe 1.2 mtr, bent to shape and fixed on wall with metal fastners 2 pairs 10mm dia with two nos of clamps made out of 40x5mm dia duly painted with two coats of synthetic enamel paint including drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting incl taking down unservioceable one complete all as specified and as directed.

M&L for sub main wiring two runs 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC conduit pipe 25mm dia complete all as specified and as directed. NOTE:- two runs of 4.0 Sq mm +one run of 4.0 Sq mm and two run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length

M&L for sub main wiring with two runs 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC casing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC casing caping and its accessories including taking down old unsv one complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fixing Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge.

Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

S&F Distribution board double door type (for incoming MCCB 100 Amps 4 Pole & out going MCBs) DPX 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing only incoming MCCB and MCBs of various rating capacity including taking down old unsv DB of any capacity complete all as specified and as directed.

S&F MCCB 4P, 415 Volts, adjustable type, 100 Amps with breaking capacity 16 KA, suitable for fixing in MCB DB including taking down old unsv MCCB complete all as specified and as directed.

S&F MCB Distribution board double door type SPN 12 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete incl taking down old UNSV all as specified and as directed. Note :MCB SPN/SP will be measured and paid separately.

M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Note :MCB SPN/SP will be measured and paid separately.

Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing MCB SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) with connection, testing and commissioning incl taking down old UNSV complete all as specified and as directed.

Supply and fixing MCB SP 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) with connection, testing and commissioning incl taking down UNSV old complete all as specified and as directed.

Supply and fix exhaust fan, steel body Heavy duty AC single Phase 230V of size 300mm sweep with, blades, frame and louvers including making opening in wall of suitable size for fixing of exhaust fan 300mm sweep and other connected works including making good the disturbed surfaces by plastering and painting to match the existing surface of wall of any masonary complete all as specified and as directed.

Supply & fitting of wall mount stainless steel Baffle T- Shapped kitchen chimney of Brand : Faber model : Hood ALPH HC PB BK 90 with air suction capacity of 1100 CMH, with the following accessories :- (i) Width : 90cm (ii) Suction power : 1100m/hr (iii) Function type : Autoclean (iv) Filter Type : Filter less (v) Finish : Black matte + glass finish loaded with premium features. (vi) Control : Soft push Button (vii) Led : 2x2W LED (viii) Product Dimension (WXDXH) (mm) : 915 x580 x505 mm (ix) Warranty : 5 years on motor and 1 year comprehensive

Material & labour for Concealing of wall (wall thickness not less than 230 mm)including wall plaster, paint, labour cost, civil cost that includes fixing the Exhaust fan Hole including making good to the disturbed surface of existing Exhaust fan hole complete all as specified and as directed. Note : Old Exhaust fan deposited to MES store yard.

Material and labour for 12mm thick prelaminated particle board with decorative choice laminates of colour that match with the Chimney colour and fixed with screws of required size complete all as specified and as directed.

Supply, install, test and commissioning commercial type wall mounted electric chimney made out of 16 SWG (304) stainless steel with front turned down, angular frame work fully welded with the following items :- (i) Chimney box of size 72 inch (L) x 32 Inch (B) X 22 Inch (H) (ii) Ductin box as site requirement (iii) One No 18 Inches Heavy Duty Exhaust Fan including Fan box of size 22 Inch (L) x 22 Inch (H) approved Make in MES. (iv) Misc Civil works such as breaking of existing slabs, plaster and repairing of slabs, matching surfaces with existing one etc (vi) Transportation

Supply, installation, testing and commissioning of hepa filter with fan filter 4 x 2 feet of size-03 Nos in each set including ducting with insulated flexible duct, return duct riser connection, with round damper, grill and all accessories procured, installed and commissioned through OEM only all as specified and directed by Engr-in-charge. Note : (i)All work should be executed through OEM only (ii) If any minor item parts required during excution of work is deemed tobe included in quoted rate.

Supply, install, commissioning and testing of commercial Air curtain unit for size 4 feet prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of stainless steel sheet square perforated suction grills,Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door Opening complete all as specified and as directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen?ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular Stranded conductor 10 sqmm 2 core complete all as specified and as directed.

S&F single pole and neutral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amp ‘C’ curve type, 230 volts, 10 KA as per Cat part No. 507811 of Make- Legrand or equivalent of any make specified in list of manufacturers.

Supply & laying of LT UG cable , XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 25 sq mm, 4 core including taking up/down old unsv one complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified ans as directed.

Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed.

Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed.

M&L for fine river washed sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed

Supply and laying tubes light grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 40mm dia bore GI tubing complete incl taking old UNSV all as specified and as directed.

M&L for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead wire 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover ( 54 cm x 54 cm x 5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge. Note:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 with 10mm thick CI cover plate hinged to angle iron frame of suitable size, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m is inclusive in quoted rates. (iii) Test points shall be made of GI strip 32x6 mm bridge type.

Supply and fixing rotational moulded polythylene water storage tank 2 layer ISI Marked with lid, cylindrical vertical with closed top of capacity 2000 Litres, with and including 20 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) connecting and hoisted mounted on staging /roof of OTM//Md Accn complete all as specified and directed by Engr-in-Charge.

Supply and laying of 3- layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply. All PP-R plain & brass threaded polypropylene random fittings laid in trenches for the following sizes:

Outer diameter of pipes in 50 mm dia

Outer diameter of pipes in 63 mm dia

M& L for PP-R Gate valves (brass insert) as per requirement of the site as specified & directed of following sizes:-

50 mm dia

63 mm dia

S & F PS plate of size 1.25m x 1.25m x 6 mm thick including cutting/welding complete all as specified and directed.

Supply and fix staging / frame work for water tanks using standard mild steel sections like angle iron / MS pipe / flat iron / sheets etc using steel of Fe 290 (Gde E-165) quality - A including necessary welding/PCC suitable to keep 5000 ltrs PVC water tank complete all as specified and directed by Engr in charge.

Supply and fix and installtion of solar water centrifugal pump 5 HP including solar module, control panel and cables complete all specified and directed.Make :- Kirloskar/CG or equavlent

CHANDRADEO PRASAD (BID ID -3343569)

PERFECT BUILDERS AND SUPPLIERS (BID ID -3345143)

Rameshwar Prasad (BID ID -3345379)

M/S SHANTI UDYOG (BID ID -3347185)

SHRI MADAN SINGH (BID ID -3344835)

commercial enterprises (BID ID -3347611)

M/S RAHUL TRADING CO. (BID ID -3346546)