Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.5 LAccepted-AOC FLAT NO 1 179 GANESH NAGAR S NO 10 YERAWADA PUNE 411006 | PUNE | MAHARASHTRA | 411006 | L1 | Accepted-AOC Bidder quoted L1 rates | |
| 2 | L2₹24.7 L+₹3.8 L (18.2%)Rejected-AOC | L2 | Rejected-AOC Bidder not quoted L1 rates | |
| 3 | L3₹26.1 L+₹5.3 L (25.3%)Rejected-AOC 7 4 DNYANESH SOCIETY WARJE MALWALDI PUNE 411 058 | PUNE | MAHARASHTRA | 411058 | L3 | Rejected-AOC Bidder not quoted L1 rates | |
| 4 | L4₹28.4 L+₹7.6 L (36.3%)Rejected-AOC | L4 | Rejected-AOC Bidder not quoted L1 rates | |
| 5 | L5₹28.7 L+₹7.8 L (37.5%)Rejected-AOC | L5 | Rejected-AOC Bidder not quoted L1 rates |
Tender Value
Refer Docs
EMD Value
₹88,000
Closing Date
4 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH PUNE
NO 1 GENERAL BHAGAT MARG PUNE 411040
8386 CERTAIN MISC REPAIRS TO SEWAGE SYSTEM IN RESIDENTIAL AND UNIT AREAS UNDER AGE BR I SOUTH PUNE
2022_MES_568437_1
8386 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
273 days
GE SOUTH PUNE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE SOUTH PUNE
₹88,000
21 Jan 2023
10 Dec 2022
6 Jan 2023
10 Dec 2022
4 Jan 2023
29 Dec 2022
Amount
Scooping & taking out sludge, sullage and foreign materials from septic tank, soak wells of any description and depth including removing and refixing of accessories and appliances required for safe disposal of sludge, sullage and foreign materials either by carrying the same in covered van/trolley outside defence land and it should be disposed off at such place which is not determinated to public health (Note :- Depth shall be measured for payment after bailing out water and the rate quoted inclusive of cost required for bailing out water.)
Demolition and breaking up RCC, SWG drain pipes set in cement mortar for the following sizes and removing debris from the site complete all as directed by Engr-in-Charge :-
150 mm bore
200 mm bore
250 mm bore
300 mm bore
Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in soft/loose soil complete all as specified and as directed.
M&L for RCC pipes 150mm bore class NP-2 with socketed ends laid and jointed complete with cement joints complete all as specified and as directed. (Note for Ser. Item No. 4 to 7 below :- Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same are deemed to be quoted unit rate in the contract)
All as per Ser. item 4.00 above but 200mm bore complete.
All as per Ser. item 4.00 above but 250mm bore complete.
All as per Ser. item 4.00 above but 300mm bore complete.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in bed to drain pipes including forming cradles for 150mm RCC hume pipe complete all as specified and as directed.
All as per Ser. item 8.00 above but 200mm dia complete.
All as per Ser. item 8.00 above but 250mm dia complete.
All as per Ser. item 8.00 above but 300mm dia complete.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soil complete all as specified and as directed.
Removing the excavated surplus soils not exc 50mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
S&F in repairs PVC floor trap with steel grating including jointing with solvent cement of 75 mm dia complete all as specified and as directed.
S&F in repairs PVC gully traps, square 125/110mm size with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete all as specified and directed.
Cleaning of manholes of any size and of any depth by taking out semi solid/solid sludge complete and removing sludge in covered vehicle out of MOD land complete all as specified and as directed.
Cleaning and rodding the blocked sewage line to any depth till the smooth flow of sewage line is restored including plugging of manholes temporarily as and when required and washing down complete sewage line with water including removing sludge and foreign materials from manholes in line and removing and refixing manhole covers and rodding complete all as directed by Engineer-in-Charge for following dia of pipes :-
150 mm bore
200 mm bore
250 mm bore
300 mm bore
Cleaning of sewage system on day to day basis including blocked WCs, blocked WHB outlet, Bottle traps, Nahani traps, floor traps, Gully traps, soil/waste pipe running on external walls of building including junctions in running/flowing condition witout disturbance and removing all types of blockages of any description in any situation manually or mechanically and disposal off the sludge/waste materials out side Defence land by deploying 02 (TWO) safaiwala per day complete all as specified and directed by Engineer-in-charge. (Note :- (i) Complaint shall be completed on same day (handed over till 1700 Hrs) (ii) If safaiwala not attended complaint within time frame mentioned above, 50% shall be deducted from job completed by him per day (iii) The contractor shall be responsible to maintain daily job completed by the safaiwala deputed by him in the subject work and obtain the signature of I/C complaint cell / Engr-in-charge daily at 1700 hours on all working days.)
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, for the following size of pipe :-
150 mm bore
200 mm bore
250 mm bore
Demolition of cement concrete of any description and in any position not otherwise specifically provided for
Demolition of brick work or stone/boulder masonry, built in cement mortar complete all as specified and as directed.
Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for
M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate in Manholes covers and slabs set in CM 1:4 complete all as specified and as directed.
M&L for mild steel TMT bars 8 to 10mm dia cut to length, bent to shape required, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation complete all as specified and as directed
M & L for solid block masonary exc. 10 cm width blocks of PCC design mix Gde C-5 set in CM (1:6) complete all as specified & directed.
M&L PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in benching, coping etc complete all as specified and as directed.
M&L for brick work with fly ash Bricks straight or curved on plan exec 6 mtr mean radius with modular bricks in CM 1: 6 complete all as specified and as directed.
M&L for brick work with fly ash Bricks straight or curved on plan to any radius in half brick thick walls built in CM 1: 4 complete all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in surface channels and drains (including necessary form work) complete all as specified and directed.
M&L for rendering 15 mm thick on block walling surface, brick masonary surface in CM (1:4) finished surfaces even and smooth using extra cement complete all as spd and directed.
S&F in repairs vitreous china water closet pan (squatting pan) white including provn of concrete bedding as fixed in repairs. Orissa pattern size 580x440mm white with integral foot rests (excluding flushing system and flush pipe) complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for coloured Ceramic tile 450x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces complete all as specified and as directed
M&L for Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match.including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.
M&L for Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match.including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed
S&F sink with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160m complete all as specified and as directed
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S & F machine cut cuddappa stone slab one side polished 40 to 50 mm thick as in shelf set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm screed bed in cement mortar (1:4) complete all as specifed and directed.
M&L for granite 18mm thick (of any type) work (table rubbed and polished) in steps ,pillar, window cill, shelf, cooking platform and like laid over and including 10mm thick rendering in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
S&F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304, ISI Marked of standard size 30"x32"x8"/10" and of approved quality of finish complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed.
S&F in repair vitrous china wash hand basin pedestal snow white 630x480mm flat back inclduing and providing PVC waste pipe 40mm dia medium grade, CP brass waste coupling 32mm dia with check nut washer etc complete all as specified and as directed.
S&F in repairs 10 litres capacity PVC flushing cistern low level including ball valve inlet & outlet connection 15 mm dia PVC pipe with check nuts on both ends, PVC waste pipe 32 mm upto WC connection and GI 15 mm dia overflow pipe upto floor level complete all as specified and as directed.
Taking up or down carefully steel tubing and connections including cleaning for refixing or removal to store of following size :-
15mm bore
20mm bore
S&F 15mm dia bore GI tubing "medium grade" including with all fittings and fixed complete to walls and ceiling or laid in floors etc (concealed type) complete all as specified and as directed.
S&F 20mm dia bore GI tubing "medium grade" including with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and as directed.
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 15mm bore complete all as specified and as directed.
S&F in replacement bib tap fancy type of cast copper alloys (Chromium plated) with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe bore complete all as specified and as directed.
S&F in repairs fancy type Bib tap 15mm size standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm, 105gm) complete all as specified and as directed.
S&F in repairs Pillar taps, 15mm bore cast copper alloy, with capstan heads, chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in replacement shower rose fancy type brass chromium plated 125 mm dia heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specified and as directed.
S&F in repairs of plastic water closet seat cover closed pattern with flat bottom ,and cover and mild steel chromium plated hinging device complete all as specified and as directed.
S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F 15mm boreStop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs stop valve 15mm bore (concealed type) chromium plated cast copper alloy fancy type with long shank and cup screwed down high pressure with capstan head or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S&F in repair tubular towel rail brass chromium plated 20mm dia 600mm long fixed with brass screws complete all as specified and as directed.
S&F Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) complete all as specified and as directed.
S&F in repairs PVC box type cabinet of approx size 35 x 40 x 12 cm with 3mm thick mirror mounted on shutter, with PVC shelves 2mm thick and outer frame having 4mm thickness fixed in existing opening with wooden plugged complete all as specified and as directed.
S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm² fixed complete to wall or in floors with necessary socket, elbow & bend etc complete fixed to wall or in floors etc complete all as specified and as directed.
Taking down chowkhat /frame of door /window/ ventilators with shutter (without taking off shutter from the frame ) area not exc 1.5 Sqm each complete all as specified and as directed.
Taking down shutters of any description n.exc. 1 Sqm each & removed to store complete all as specified and as directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fxing in opening as per specification& drawing complete all as specified and as directed by the Engineer-in-Charge.
S & F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing complete given on Sl Page No. 149 of SSR Part-II 2020 as specified and directed by Engr-in-Charge.
S&F of 100mm long stainless steel butt hinges medium weight and fixed complete all as specified and as directed.
S&F of 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F 250mm long MS sliding door bolts, plate type stove enamelled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.
S&F of 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.
Taking down / cutting steel window shutters by means of gas cutter without disturbing of soffit / jambs / cills etc. of any description n.exc. 1.5 sqm (without taking off guard bars) complete all as specified and as directed.
S&F three track sliding window with two or more shutter with 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352
S&F ventiltors/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP 20048 (b) Glazing clips 19352
Taking down chowkat or frame with shutters (without taking of shutters from the frame) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm but n.exc. 2 Sqm each & removed to store complete all as specified and as directed.
S & F of pressed steel frames of size (105 X 60mm) for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, incl M & L for providing PCC type B-0 ,1:2:4(using 12.5 mm graded stone aggregate) to fill up the hallow portion of the frame including making good the distrubed surface complete all as specified and directed.
S & F of pressed steel frames of size (125 X 60mm) for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, incl M & L for providing PCC type B-0 ,1:2:4(using 12.5 mm graded stone aggregate) to fill up the hallow portion of the frame including making good the distrubed surface complete all as specified and directed.
S&F 35 mm thick factory made IInd class hardwood plain framed panelled shutters/ any number member of panels) with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile as per IS : 1003 (Part I ) kiln seasoned and chemically pressure treated all as specified and as directed.
S&F 35 mm thick factory made IInd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) and fitted to chowkhats complete all as specified and as directed.
S&F of stainless steel Wire cloth 0.56mm nominal dia of Wire and average Width of aperture 1.18mm and fixed with stainless steel stapple/ wooden beads to steel or wooden windows/door/shutters/frames etc complete all as specified and as directed.
S&F of 200mm long aluminium anodised barrel tower bolt of extruded section and as directed.
S&F 300mm long MS sliding door bolts, plate type stove enamelled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.
Demolition and breaking of drain pipes AC /CI/PVC set in cement mortar or adhensive all as directed of 75mm to 110 mm dia complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with MS clamp or laid in floors/in earth of 110 mm dia complete all as specified and as directed.
All as per Ser. item No 84.00 above but 75mm dia complete all as specified and as directed.
Refixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 110mm dia.
Refixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 75mm dia complete all as specified and as directed.
S&F PVC (SWR) bends plain 110 mm bore complete all as specified and as directed.
S&F PVC(SWR) bends plain 75mm bore complete all as specified and as directed.
S&F PVC (SWR) bends with oval access door of 110 mm bore complete all as specified and as directed.
S&F PVC (SWR) bends with oval access door of 75 mm bore complete all as specified and as directed.
S&F PVC (SWR) of 110mm dia junction single (single 'T') equal or unequal with door access complete all as specified and as directed.
S&F PVC (SWR) of 75 mm dia junction single (single 'T') equal or unequal with door access complete all as specified and as directed.
Disconnecting existing tank of exc. 250 Ltr but not exc. 500 Ltr capacity, setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting & refixing in position (cleaning, repairing etc measured separately) after carrying out necessary roof treatment including necessary fittings and GI pipes if required. (Note : Necessary bypass arrangements for water supply is to be carried out by the contractor till completion of roof work.)
Disconnecting existing tank of exc. 500 Ltr but not exc. 1000 Ltr capacity, setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting & refixing in position (cleaning, repairing etc measured separately) after carrying out necessary roof treatment including necessary fittings and GI pipes if required. (Note : Necessary bypass arrangements for water supply is to be carried out by the contractor till completion of roof work.)
M & L for Cleaning and removing all dirt and scale etc from tank and from the mouths of circulating pipes for the tanks 250 Ltrs but not exc. 500 Ltrs of capacity complete all as specified and as directed.
M & L for Cleaning and removing all dirt and scale etc from tank and from the mouths of circulating pipes for the tanks 500 Ltrs but not exc. 1000 Ltrs of capacity complete all as specified and as directed.
S&F in repairs of steel grating of 100mm in size for nahni trap/floor including jointing complete all as specified and as directed.
M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.
M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid over and including on 50mm thick stone dust cushioning, laid dry to the profile over hard concrete sub base or rammed earth/murrum filling all as directed by Engr-in-Charge
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
L.K.R.TIWARI CONSTRUCTION
PRASHANT CONSTRUCTION
REKHA ELECTRICALS
M/S BRJ & SONS
Takshashila electricals
M/s.BAJRANG CONSTRUCTION
M/S Sharvi Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .