Karnataka

Active

Works

Buildings

Construction of one room of Government Junior Primary School at Chinnakurchi village under K. Gollahalli Grama Panchayat, Kengeri Hobli, Bangalore South Taluk, Yashwantpur Assembly Constituency. Under Viveka Yojane Grants- Reserved for ST Category

Rural Development and Panchayat Raj Department

RDPR Division Office Bengaluru Urban | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 5 Sept 2026

Timeline

Published20 Aug 2026
Closes5 Sept 2026

Tender Value

Refer Docs

EMD Value

₹18,125

Closing Date

5 Sept 2026, 9:30 pm

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

RAJU CS

Office Number

08026716046

Work Description

Construction of one room of Government Junior Primary School at Chinnakurchi village under K. Gollahalli Grama Panchayat, Kengeri Hobli, Bangalore South Taluk, Yashwantpur Assembly Constituency. Under Viveka Yojane Grants- Reserved for ST Category

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT28829

Reference Number

RDPR/2026-27/BD/WORK_INDENT28829

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Bengaluru Urban

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredAnnual Turnover Certificate - CA with UDIN No.

RequiredPWD Registration Certificate- Class III and above

RequiredBid Capacity

RequiredDomicile Certificate

RequiredReserved Category Certificate-ST

RequiredBalance sheets , profit & loss statement certified by an Registered chartered accountant if not uploaded tender is rejected

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Submission of insufficient documents required for Qualification of tender document as per K.W.1 of SBD will be technically dis-qualified.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

PWD Department Registration Details

If the tenderers who have been failed to complete the work within the stipulated period in this Division pertaining to already entrusted works such tenderers will not entertained

List of existing commitments and ongoing work

List of works for which tenders already submitted

the tender bidders should furnish EMD as stipulated in tender Notification as furnished in Standard tender Bid Document K.W.1

the available tender capacity will be calculated as stipulated in Sec-3 of KW-1 Corrigendums.

Even though the tenderers meet the above criteria they are subject to be disqualified if they have made any misleading or false representations in the forms statements and attachments submitted in proof of the qualification requirements and or records of poor performance such as abandoning the works not properly completing the contract, inordinate delays in completion, litigation history or financial failures etc and or participated in the previous tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification

Labour cess will be deducted at 1% from Each Bill of the executed items from the Successful tenderers.

the tenderer shall furnish all requisite details as per Standard Bid tender Document . they must carefully read all the tender conditions as stipulated in I.F.t and K.W.1 and relevant document shall be furnished. Otherwise tenders will be rejected.

Corrigendum pertaining to tender are applicable as per Government Circulars.

Successful tenderer has to make their own arrangement for procurement of all materials and machineries required for the work.

the tenderer should complete the work within the stipulated period, otherwise Security Deposit amount will be forfeited .Action will be taken for black listing of such contractors.

the Photos and Video graphs should be taken before commencement, during execution and after completion of the work in presence of nodal officers

the tenderers who meets all tender conditions stipulated inK.W.1 are only eligible

the undersigned reserves the Right to accept / reject any/ all tenders without assigning any reason.

the defect liability period on contractor is one year from the date of completion of the work.

Conditional tenders will be rejected.

the work shall be implemented within the grants allotted by the Government.

Contractor has to make their own arrangements for procurement of all materials and machineries required for the work. there is no departmental supply of materials. Contractor should procure materials and as defined in specifications prescribed in ISI and submit necessary quality control certificates from the authorized agencies before execution.

Within 20 days of receipt of the letter of acceptance, the Successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5% of contract price plus additional security for un balanced tenders. Bankers cheque /DD/pay order in favour of EE Panchayath Raj Engineering Division, Bangalore Urban District, Bangalore/Specified small savings instrument pledged to EE Panchayath Raj Engineering Division, Bangalore Urban District, Bangalore otherwise the E.M.D. will be forfeited and necessary action will be initiated against the tenderer as per tender Clause

the Furnished E.M.D. will be released only after successfully execution of the tender Agreement by the successful tenderer or 30 days from the date of submission of tender whichever is earlier.

Each item rates are Exclusive of GST 18%. bidder should quote the rates Exclusive of GST for each item.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹18,125

Important Dates

Last Activity

20 Aug 2026

Published

20 Aug 2026

Download Ends

4 Sept 2026

BOQ Preview

•

Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

•

Providing Coursed rubble masonry( First sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand --with all lead, lift, loading, unloading, labour, fuel, hire cha...

•

Providing Size stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand --with all lead, lift, loading, unloading, labour, fuel, hire charges of machineri...

•

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 5.00 N/mm2 conforming to IS 2...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing 6 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6(1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removin...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

•

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

•

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...

•

Supplying and fixing PVC/metal conduit Deep junction box 32mm deep Junction box --with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidenta...

•

Supplying And Fixing Metal Fan Box with Round Hook. --with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental charges as per detailed sp...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. 6 Amps lamp holder --with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, ...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. 6Amps SP Switch --with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, eq...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP-kw-1-28829-ST.docx

Tender Document • 1.85 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].