Karnataka

To Be Opened

Works

Roads

Construction of Asphalt road from Doddalahalli-Sathanuru main road to Yadamaranahalli village via Pattaladamma temple and Construction of Approach road and Checkdam below the existing bridge across the water weir of Yadamaranahalli tank under Doddalahalli G.P in Kanakapura taluk.

Cauvery Neeravari Nigam Limited

CNNL Mekedatu Project Div Harobele | MYSORE, Karnataka

Amount: ₹4.1 CrCloses: 24 Jul 2026Closed

Timeline

Published9 Jul 2026
Pre-Bid Meeting13 Jul 2026
Closed24 Jul 2026
Bid Opening27 Jul 2026

Tender Value

₹4.1 Cr

EMD Value

₹6.1 L

Closing Date

24 Jul 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

MOHANA M N

Office Number

Mobile Number

Work Description

Construction of Asphalt road from Doddalahalli-Sathanuru main road to Yadamaranahalli village via Pattaladamma temple and Construction of Approach road and Checkdam below the existing bridge across the water weir of Yadamaranahalli tank under Doddalahalli G.P in Kanakapura taluk.

Tender Information

Tender ID

CNNL/2026-27/RD/WORK_INDENT5240

Reference Number

CNNL/2026-27/RD/WORK_INDENT5240

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

CNNL Mekedatu Project Div Harobele

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredKPWD Registration Certificate of class II and above

RequiredAnnual Turnover Certificate issued by CA

RequiredWork done Certificate with year wise executed quantity breakup duly certified by The Executive Engineer

RequiredLine of credit certificate in prescribed format

RequiredExisting commitments & ongoing works details

RequiredTender capacity calculation

RequiredVehicle RC copies and Bills of the equipments

RequiredTechnical person certificates and CV

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The Intending bidder are advised to visit the site of work and also access the tender documents well in advance

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and Submission of his tender, and the employer will in no case be responsible and liable for those costs.

The TENDER PROCEESING FEE will not be refunded.

The CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons,

If the quoted rates for the items fall below the estimated rates, the successful bidder should produce an additional performance Guarantee in the form of Bank Guarantee for the difference amount of quoted rates and estimated rates before executing agreement with CNNL. In case of contractor quoting rate above 125% of the estimated rates, then the amount over and above 125% will be withheld during the progress of work..

The contractor should be registered in respective class Category of KPWD / Any State / Central Government / Public sector organizations

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

The rates quoted by the contractor must be exclusive of GST and inclusive of sales Tax and any other duties, taxes, etc., The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval.

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, Mekedatu Project Division, Harobele during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events

The work includes all lead and lift / de-lift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height

The intending bidders should note that if any of the land either in part / parts or in whole required for the work is not yet acquired by the Nigama, it shall be the responsibility of the bidder to take possession of such land and start the work by obtaining necessary consent of the land owners before commencement of work at no extra cost to the Nigama and no claim what so ever relating to non-availability of land will be entertained. Any delay in obtaining consent of the land owners shall not be considered for any additional compensation.

The undersigned reserves the right to either postpone or to cancel the entire process of tender

If CNNL wishes to engage third party consultants for quality control assessment, apart from the CNNL quality control and field tests, the contractor should co-operate with both Quality control authorities and the third party

Defect liability period will be 3 Years from the date of completion and satisfactory commissioning

Performance guarantee:- For all works an amount equal to 5.00% of the contract value will be withheld as Performance Guarantee Amount till the expiry of the defect liability period

Building and other construction workers welfare cess

The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / percentage.

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc.,

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document

The Tenderer should furnish the requisite Earnest Money Deposit

The Tenderer should furnish a copy of the Income Tax Return for the latest financial year

A copy of GST Certificate of the latest financial Year

Employees Provident fund Registration Certificate In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due to the contractor. Notwithstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities

The necessary certificates / documents in support fulfilling qualification criteria stipulated separately shall be scanned and attached to e-procurement document. The original document shall be produced at the time of opening of tender containing the Technical Bid for verification

The Bidder should also furnish the list of work on hand with all details. Such as bid cost, date of entrustment, stipulated date of completion, actual date of completion, completed cost of work, etc

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer

The intending Bidder/firm/company/ should have man power available with him for taking up above work

The intending Bidder/firm/company/ shall provide evidence that the bidder has been actively engaged in the similar nature of work for at least for a period of 5 years prior to the date of submission of application

The intending Bidder/firm/company/ shall provide accurate information on the related application form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer or any partner of a may result in failure of the application

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary, the employer shall have the authority to make enquiries with the applicants bankers

Technical Criteria

Past Experience

Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as Improvements / Construction of road of value not less than Rs.203.00 Lakhs Note: Work done certificate issued by competent authority not below the rank of Executive Engineer should be furnished Financial turnover & Work done of previous years indicated above shall be given a weightage of 10% per year to bring them to the price level of 2026-27

Work Done Certificate

Executed in any one year, the following minimum quantities of work(1) EWE/Embankment (Cum) 13600 (2)Cement Concrete (Cum) 2500, (3) Steel (Tonne) 37 (4)WMM/WBM/GSB (Cum) 1100, (5)DBM/BM/BC/SDBC (Cum) 230.00,Note: Work done certificate with year wise breakup of quantities should be furnished

Work Done Certificate

Capabilities of Vendor

Tenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as underAssessed available tender capacity (AxNx1.5-B) Where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress,N Number of months prescribed for completion of the works for which tenders are invited, B Value at 2026-27 price level, of existing commitments and on-going works to be completed

Others -- Tender Capacity Calculation

Each Tenderer should further demonstrate Availability by owning at least 50% of the required following key and critical equipments for this work (b) the remaining 50 % can be deployed on lease/hire for all works provided, the relevant documents (Commitment agreements etc.,) for availability for this work are furnished. The intending Bidder/firm/company/ should furnish details of ownership / lease certificates of the following minimum requirement of machineries, (a) Excavator (1 own and 1 lease/hire)-02No.s, (b) Tipper (1 own and 1 lease/hire)- 02No.s, (c) Tractor mounted Water tanker-(1 own and 1lease/hire)-02No.s, (d) Concrete Mixer (1 own and1 lease) -02No.s, (e) Vibrator roller(1 own and 1 lease) 02No.s, Note : The figures mentioned above is indicative, Should there be any change in above quantities the bidder should substantiate the same with calculations

Others -- Vehicle RC copies and Bills of the equipments

List of Key Minimum Technical personal required for the work are as under and should be enrolled in company/ firm/company/ should Employment register and document should be uploaded of Civil Engineer / Diploma holders: Civil Engineering with Min 5 years experience of one No

Others -- Technical person certificates and CV

Financial Status

Achieved in at least two financial years an average annual financial turnover (in all classes of Civil Engineering construction works) only of Rs.812.00 Lakhs Note : Turnover certificate duly certified by Chartered accountant along with audited balance sheets should be furnished

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs 122.00 Lakhs (Credit lines/ letter of credit/ certificates from scheduled / nationalized banks for meeting the fund requirement etc.) in the prescribed format

Line of Credit

Others

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.1 L

Important Dates

Last Activity

9 Jul 2026

Published

9 Jul 2026

Bid Opening

27 Jul 2026

Download Ends

13 Jul 2026

Pre-Bid Meeting

13 Jul 2026

BOQ Preview

•

Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment. complete with all lead and lifts and as directed by the engineer in charge.

•

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Construction of Granular Sub-Base By Mix in Place Method of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front ...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

Primer Coat over WMM/WBM

•

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...

•

Bituminous Macadam Grading - II for traffic 20 MSA Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous...

•

Providing and applying tack coat with VG-10 Bitumen usingpressure distributor at the rate of 0.20 kg/m2 on the preparedbituminous surface cleaned with mechanical broom complete with all lea...

•

Semi Dense Bituminous concrete

•

Providing and laying Semi Dense Bituminous Concrete with40/60 TPH capacity hot mix plant batch type using crushedaggregates of specified grading premixed with bituminous...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

•

Providing and erecting a "W" metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x...

•

Providng and fixing Name board displaying information such as , Name of work,tender cost , name of contractor, workcompletion and liability period etc', having rectangular shape of 1.20m x 0.90m siz...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap /basalt crushed graded coarse aggregates and fine aggregates as per relevant ...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired stee...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towa...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

•

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

•

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete. complete with all lead and lifts and as directed by the engineer in char...

•

Providing and fixing 25 mm dia 3 m long cold twisted defomed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L - bend for mbedding ...

•

Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials, machinery, labour, watering, ramming etc.,complete with all lead and all lifts. complete with all lead an...

•

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufactur...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification complete with all lead and lifts and as directed by the engineer in charge.

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. complete with all lead and lifts and as directed by the engin...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification complete with all lead and lifts and as directed by the engineer in charge.

•

Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...

•

Providing and laying in position plain cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basa...

•

Providing and constructing dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labou...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification Granular material complete with all lead and lifts and as directed by...

•

Providing and fixing 50 mm diameter and 750 mm long perforated GI pressure relief pipe with one end closed by perforated GI plate and other end provided with alluminium lid hinged to pipe including co...

•

Providing and fixing 25 mm dia 2.50 m long cold twisted defomed steel anchor rod with 1.25 m length driven into 38 mm dia hole drilled in bed rock and remaining length embedded in concrete / masonry i...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

5240 DTS.docx

Tender Document • 4.67 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Roads

Construction of Asphalt road from Doddalahalli-Sathanuru main road to Yadamaranahalli village via Pattaladamma temple and Construction of Approach road and Checkdam below the existing bridge across the water weir of Yadamaranahalli tank under Doddalahalli G.P in Kanakapura taluk.

Cauvery Neeravari Nigam Limited

CNNL Mekedatu Project Div Harobele | MYSORE, Karnataka

Amount: ₹4.1 CrCloses: 24 Jul 2026Closed

Timeline

Published9 Jul 2026
Pre-Bid Meeting13 Jul 2026
Closed24 Jul 2026
Bid Opening27 Jul 2026

Tender Value

₹4.1 Cr

EMD Value

₹6.1 L

Closing Date

24 Jul 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

MOHANA M N

Office Number

Mobile Number

Work Description

Tender Information

Tender ID

CNNL/2026-27/RD/WORK_INDENT5240

Reference Number

CNNL/2026-27/RD/WORK_INDENT5240

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

CNNL Mekedatu Project Div Harobele

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredKPWD Registration Certificate of class II and above

RequiredAnnual Turnover Certificate issued by CA

RequiredWork done Certificate with year wise executed quantity breakup duly certified by The Executive Engineer

RequiredLine of credit certificate in prescribed format

RequiredExisting commitments & ongoing works details

RequiredTender capacity calculation

RequiredVehicle RC copies and Bills of the equipments

RequiredTechnical person certificates and CV

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The Intending bidder are advised to visit the site of work and also access the tender documents well in advance

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and Submission of his tender, and the employer will in no case be responsible and liable for those costs.

The TENDER PROCEESING FEE will not be refunded.

The CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons,

The contractor should be registered in respective class Category of KPWD / Any State / Central Government / Public sector organizations

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval.

The undersigned reserves the right to either postpone or to cancel the entire process of tender

Defect liability period will be 3 Years from the date of completion and satisfactory commissioning

Performance guarantee:- For all works an amount equal to 5.00% of the contract value will be withheld as Performance Guarantee Amount till the expiry of the defect liability period

Building and other construction workers welfare cess

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc.,

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document

The Tenderer should furnish the requisite Earnest Money Deposit

The Tenderer should furnish a copy of the Income Tax Return for the latest financial year

A copy of GST Certificate of the latest financial Year

The Bidder should also furnish the list of work on hand with all details. Such as bid cost, date of entrustment, stipulated date of completion, actual date of completion, completed cost of work, etc

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer

The intending Bidder/firm/company/ should have man power available with him for taking up above work

Technical Criteria

Past Experience

Work Done Certificate

Capabilities of Vendor

Others -- Tender Capacity Calculation

Others -- Vehicle RC copies and Bills of the equipments

Others -- Technical person certificates and CV

Financial Status

Audited CA Certificate of Annual Turnover

Line of Credit

Others

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.1 L

Important Dates

Last Activity

9 Jul 2026

Published

9 Jul 2026

Bid Opening

27 Jul 2026

Download Ends

13 Jul 2026

Pre-Bid Meeting

13 Jul 2026

BOQ Preview

•

Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment. complete with all lead and lifts and as directed by the engineer in charge.

•

Primer Coat over WMM/WBM

•

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...

•

Providing and applying tack coat with VG-10 Bitumen usingpressure distributor at the rate of 0.20 kg/m2 on the preparedbituminous surface cleaned with mechanical broom complete with all lea...

•

Semi Dense Bituminous concrete

•

Providing and laying Semi Dense Bituminous Concrete with40/60 TPH capacity hot mix plant batch type using crushedaggregates of specified grading premixed with bituminous...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification complete with all lead and lifts and as directed by the engineer in charge.

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification complete with all lead and lifts and as directed by the engineer in charge.

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

5240 DTS.docx

Tender Document • 4.67 MB

Ready to Participate?

Download all tender documents and submit your bid