8621PROVISION OF DFT FILLING POINTS AT AFTC AND RENOVATION OF TMQ IN WEST AREA UNDER GE M AF JALAHALLI BANGALORE

Amount

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for including removal of debris to out side of MD land

Material and labour 75mm thick cement concrete 1:4:8 type D-2 using stone aggregate as in sub base, Floors, Paving finished even and fair complete all as specified

Material and labour for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded agg as in flooring finished even and smooth without using extra cement

Material and labour for 75mm thick cement concrete 1:3:6 type C-2(using 40mm graded stone aggrgaed) as in plinth protection finished even and smooth with using extra cement all as specifiedand as directed

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc including Brushing neat cement slurry with 3.0kg of cement per sq. metre

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar

Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor and all as specified and directed

Material and labour for rendering 10mm thick in CM 1:3 on brick work or concrete surfaces as in backing coat to receive wall tiles etc

Material and labour for forming construction (Dummy) joints 30mm deep x 10mm wide filled with sealing compound Grade 'A' all as specifiedand as directed

Material and labour for Ist quality non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed

All as per item No 11 here in before but in skirting including necessary cutting of tiles

Material and labour for Ist quality non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material and labour for Ist quality ceramic coloured tiles of size 300x200mmx7 to 8 mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured / white cement to match the tiles and all as specified and directed

Dismantling of Stone slabs and tiles of any description, any position and thickness in floors, cooking plateform, aprons etc

Material and labour for Granite (of any type) slab mirror polished 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in window cill, cooking platform and over 15mm thick rendering in CM (1:4) complete all as specified and directed

Material and labour Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations

Dismantling of Single layer Mangalore pattern or similar tiles in roofing

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Material and labour for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified

Material and labour for pre-painted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall and roof ridges, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed

Supply and fixing for Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates of Fe 410 W (Gde E 250)quality B all as specified and directed

Dismantling timber scantlings 40 sqcm and over in section, in any position all as specified and directed

Material and labour for second class hard-wood in scantlings, clean sawn complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brickwork, masonry etc, including taking out embedded portion and making good disturbed ground

Material and labour for providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm but not exc 150 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Material and labour for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Material and labour for cement concrete 1:3:6 type C2 (using 40mm aggregate) in foundations, filling and mass concrete all as specified and directed

Material and labour preparation on new steel surfaces of any description exc10cm width or girth including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed

Demolition of brick work, stone masonary, cement concrete block walling built in cement mortar or cement lime mortar including all quoins, arches etc complete

Material and labour for precast cement concrete 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6

Material and labour for rendering 10mm thick in CM 1:6 for fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified

Material and labour for suspended false ceiling system using suspended grid system, grid size 600mm x 600mm with and including GI framework of main runners 38mm x 24mm, cross Tee 28mm x 24mm and wall angles 24mm x 24mm, hot dipped galvanised steel zinc coating not less than 120gm/sqm of surface area, with and including 4mm thick high pressure steam cured fibre cement plain boards, pre primered texture variant ISI marked IS 14862-2000, to be placed in grid of suspended ceiling grid system duly suspended by 3mm dia GI wire hangers from existing purlins to roof with butterfly clips or RCC ceiling with fasteners complete as specified and directed

Material and labour applying three coats of white washing on new celing boards including preparation of new surfaces

Taking down shutters of any description exceeding 1Sqm, not exceeding 2 Sqm each

Taking down Chowkhat or frames n exc 1.5 Sqm each with shutters (without taking off shutters from the frames)

All as per item No 39 above but exc 1.5 Sqm but n exc 4 Sqm

Resecuring or easing and adjusting wooden shutters of any description exc 1 Sqm but n exc 2 Sqm each without taking down

Material and labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified

Dismantling of Battens for tiles, shingles etc, of any size including tilting fillets, spaced exc 15cm complete as directed

Supply and fixing 2nd class hardwood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Supply and fixing 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Supply and fixing of PVC hollow door frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm thick rigid PVC foam sheet, mitre cut at two corners and joined with two nos of 150mm long brackets of 15mm x 15mm MS square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm MS square tube of 19 gauge, EPDM rubber gasket, weather seal to be provided through out the frame. The doorframe shall be fixed to the wall using 65/100mm long MS screws through the frame using PVC fasteners. A minimum of four nos of screws to be provided for each vertical member and minimum of two nos of screws for each horizontal member complete as per Manufacturer’s specification and drawing and as directed

Supply and fixing of factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Supply and fixing 100 mm long heavy weight rolled Mild steel butt hinge with galvanised mild steel hinge pin

Supply and fixing 75 mm long Butt hinges, heavy weight, cold rolled mild steel with galvanised mild steel hinge pin

Supply and fixing 150 mm long Aluminium anodised, barrel tower bolt of extruded section and fixed

Supply and fixing 125 mm long Aluminium anodised, barrel tower bolt of extruded section and fixed

Supply and fixing 150 mm long Extruded Aluminium anodised alloy handles , fabricated type and fixed

Supply and fixing 125 mm long Extruded Aluminium anodised alloy handles , fabricated type anf fixed

Supply and fixing 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed

Supply and fixing in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beading all as specified and directed

Supply and fixing in repairs 4 mm thick Sheet glass, ordinary quality and glazing with wooden beading in square n exc 0.5 sq. m in each pane and all as specified and directed

Taking out steel water tubing and connections including cleaning for refixing 15 mm dia

All as per item No 57 hereinbefore but 20mm dia

Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth

Supplying and laying of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps and saddles including taking down existing pipe and fittings

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles including taking down existing pipe and fittings

Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 110 mm

All as per item No 64 but for 75mm bore of pipe

Supply and fixing PVC (SWR) bends of any radius bore of pipe 110 mm

All as per item No 66, but for 75mm bore of pipe

Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm

Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm

Supply and fixing 110mm bore PVC (SWR) vent cowl

Supply and fixing 75mm bore PVC (SWR) vent cowl

Supply and fixing in repairs rotational three layer moulded Polyethylene water storage tank - 500 liters capacity (cylidrical vertical with double layered, threaded top cover) hoisted and fixed in position all as specified in SSR part I

Supply and fixing in repair viterous china squatting pan 'Orissa pattern ' size 580 x 440mm white with integral foot rests incl connecting to 'P' or 'S' trap and to flush pipe antisyphonage pipe etc compete including provn of lime concerte bedding and making good to floor all as specified

Supply and fixing in repairs PVC low level flushing cistern 10 Lit capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed

Supply and fixing in repairs vitreous china white wash hand basin flat back size 550x400mm including CI/MS brackets, cutting for and pinning in brackets but excluding waste pipe

Supply and fixing in repairs stop valves, fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed

All as per item 75 hereinbefore but angle valve

Supply and fixing in repairs Bib taps fancy type chronium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore

Supply and fixing in repairs pillar tap with capstan heads chronium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore

Supply and fixing in repair fancy type brass chromium plated shower rose with arm complete

Supply and fixing of chromium plated towel rail 20mm dia D type 60 cm long

Supply and fixing in repair CP soap disk fixed with screw to wall complete

Supply and fixing of shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed

Supply and fixing in repairs PVC connection 15mm dia and 450mm long with two Nos of brass checknuts and washers complete

Supply and fixing in repair grating doom 100mm dia of PTMT (Min wt 25 gms)

Supply and fixing in repairs PVC waste pipe 32mm bore for WHB & Sink

Supply and fixing of mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 10cm and n exc 15cm long

Material and labour for preparation of plastered or unplastered old decorated surfaces of walls and applying one coat of oil emulsion distemper complete all as specified and directed

Material and labour for preperation of old painted surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint complete all as specified and directed

Material and labour for preparation of new wooden surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink wood primer and all as specified and directed

Material and labour for preparation of old wooden surfaces of any description and applying one coats of synthetic enamel paint all as specified and directed

Material and labour for preparation of plastered or unplastered new surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed

Material and labour for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and directed

Material and labour for preparation of plastered or unplastered new surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed

Removing building materials etc. (other than spoil) to a distance of exc 50m and n exc 1.50 Km, including loading, unloading and stacking at the destination

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed

Material and labour for point wiring on surface/wall/roof using approved colour code as per IS (Red, Black and Green for single phase circuits) on surface/wall/floor with multistrand copper conductor (FRLS) with 1.5 sq mm nominal cross-sectional area, single core, cable 1100 Volts grade ISI-694 marked with valid CM/L No. drawn in medium grade new PVC conduit of dia not less then 20MM conduit/ casing-caping accessories on wall/floor (expect on RCC celling and on roof trusses where conduit shall be on surface ) ISI marked conduit and conduit accessories with mild steel/pressed steel sunkun box (with earth dolly ) sully painted with two coatsof black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated sheet cover for fixing of switches, sockets including PVC insulated multi-stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continiuty conductor to common earth and connecting to earth dolly complete For one light point controlled by one 5/6 amp one way switch all as specifed and directed by Engr-in-charge at site Make for conduit - Finolex/Diplast/Surya. ( Note: switch /socket to be measured and paid seperatly in respective items)

All as per item No 99 but For one fan point controlled by one 5/6 amp one switch and one electronic step type regulator all as directed.

All as per item No 99 but For one Bell point controlled by one way bell switch SP 5 amp 240V all as directed.

All as per item No 99 but For one 5 Amp, 5 pin switch socket combination point 5/6 amp on independent board with all as directed.

All as per item No 99 but For one 5 Amp, 5 pin, switch socket combination point with other switch on the same board all as directed.

All as per item No 99 here-in-before but with 2.5sqmm un sheathed multistranded cable for one socket outlet 15 Amps indipendent including continuous copper earth wire, PVC insulated of 2.5 sqmm size all as directed (Switch, socket shall be measured and paid separately)

All as per item No 99 above here-in-before but with 4.0 sqmm two run and one switch socket combination 15 Amps independent with one run cable 4.0 sq mm size asearth wire complete (switch,socket shall be measured and paid separately)

Material and labour for concealed point wiring using approved colour code as per IS (Red, Black and Green for single phase circuits) with multistrand copper conductor (FRLS) with 1.5 sq mm nominal cross-sectional area, single core, cable 1100 Volts grade ISI-694 marked with valid CM/L No. drawn in medium grade new PVC conduit of dia not less then 20MM and conduit accessories in wall/floor (expect on RCC celling and on roof trusses where conduit shall be on surface ) ISI marked conduit and conduit accessories with mild steel/pressed steel sunkun box (with earth dolly ) sully painted with two coatsof black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated sheet cover for fixing of switches, sockets including PVC insulated multi-stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continiuty conductor to common earth and connecting to earth dolly complete For one light point controlled by one 5/6 amp one way switch all as specifed and directed by Engr-in-charge Make for conduit - Finolex/Diplast/Surya. ( Note: switch /socket to be measured and paid seperatly in respective items)

All as per item No 106 but For one fan point controlled by one 5/6 amp one switch and one electronic step type regulator all as directed.

All as per item No 106 but For one Bell point controlled by one way bell switch SP 5 amp 240V all as directed.

All as per item No 106 but For one 5 Amp, 5 pin socket point 5/6 amp on independent board with all as directed.

All as per item No 106 but For one 5 pin, 5 Amp socket point with other switch on the same board all as directed.

All as per item No 106 here-in-before but with 2.5sqmm un sheathed multistranded cable for one socket outlet 15 Amps indipendent including continuous copper earth wire, PVC insulated of 1.5 sqmm size all as directed (Switch, socket shall be measured and paid separately)

All as per item No 106 above here-in-before but with 4.0 sqmm two run and one switch socket combination 15 Amps independent with one run cable 4.0 sq mm size asearth wire complete (switch,socket shall be measured and paid separately)

Supply and fixing switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.

Supply and fixing switch Bell push 5/6 Amps, flush type complete all as specified.

Supply and fixing switch socket combination 2in1, 5 pin 5 Amps flush type universal shuttered 240 Volts ISI Marked with complete all as specified

Supply and fixing the switch piano flush button type single pole one way 15 Amps 240 volts ISI marked complete all as specified and directed.

Supply and fixing Switch socket combination 2in1 , 15 Amps flush type universal shuttered 240 Volts ISI Marked with complete all as specified

Supply and fixing the Ceiling ros, three terrminal ISI Marked surface backlite complete

Supply and fixing the electronic double space rotary step type 5 speed regulator 120-280V,

Supply and fixing electric bell AC, Ding -dong type, 230 volts, single pole complete all as specified

Supply and fixing the tube light fitting suitable for 20 watt LED tube light fitting 4feet with high frequency power factor 0.90 wall/ceiling mounted with all accessories internally prewired and including connecting up with twin core copper conductore cvable of size 23/.0076 from ceiling rose to connetor block all as specified. Make: Crompton Model :TRIMLINE LDL-20-NW or equivalent.

Supply and fixing the 10 watt LED Tube light fitting 2feet with high frequency power factor 0.90 wall/ceiling mounted with all accessories internally prewired and including connecting up with twin core copper conductore cvable of size 23/.0076 from ceiling rose to connetor block all as specified.Make: Crompton Model :Trim Linea LCLTN-10-NW or equivalent.

Supply and fixing testing and commissioning of MCB SP 6 to 30 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as directed.

Supply and fixing testing and commissioning the MCB SPN, 240 Volt AC50 Hz,32 Amps complete all as directed.

Taking down DBs along with all accessorieis any type any size and making good the distrubed surface complete all as specified and directed.

Supply and fixing in repair the sheet metal enclosure MCB DB, SPN 240 Volts, 8 Way double door type grouting in wall in CM, Making good of disturbed surfaces and matching with existing surface including provn of suitable weather proof meter box and electrical connections complete all as directed.

Material and labour for Earthing complete with GI earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to GI earth wire of size 4mm dia as earth lead by means of bolts, nuts, checknuts and washers of GI or steel all as shown in electrical plate no 3 of SSR Part-1 connected to earthing lead upto main switch board/main board all as specified and testing on completion including provision of earth wire protected by GI 15 mm dia light grade pipe and watering pipe shall be 20mm bore light grade including all excavation and easrth work in any type of strata, PCC pit pre-cast RCC Cover, Charcoal/salt, funnel with wire mesh etc complete all as speified and directed. Note : (i) The ratequoted shall also deemed to include the cost of GI earth strip and protection pipe upto 7.5 Mtr beyondtheearth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

Taking down sub main wiring along withexisting conduit and accessories complete all as specified and directed by Engr-in-Charge.

Material and labour for Sub main wiring 6 Sqmm with single core flame retardant PVC Insulated (colour code- Red, Black and Green as phase, Nuetral and Earth) and unsheathed cable with standed copper conductor of 6 sqmm drawing in & including medium grade PVC concealed conduit pipe 20mm bore ISI marked wih all accessories on wall and making good of disturbedsurface including all conduit fittings, clamps, gutties etc and one additional earth wire of 6sq mm but green in colour for earth DBs and boxes with proper thimbles complete all as specified and directed Note: two run of 6 sq mm wire and one run of 6sqmm earth wire shall be measured as on one RM rate

Supply and fixing surface mounted/bulkhead 20 Watt LED Fitting Square/Round shape Water resistance complete all as specified and as directed. Make :Crompton Model: Royal Rimless-R LCRP-20-NW or equivalent.

Supply and fixing in repair the sheet metal enclosure Vertical distribution board TPN when MCCB to be used TPN (Triple pole and neutral) 4 way, 415 Volts IP 42/43 protection with 250 Amps rated bus bar, double door type grouting in wall including MCCB , 415 Voltss 4 pole, TPN rating 100 Amps, 16 KAbreaking capacity as incomer thermal magnatic type complete all asspecified and directed. .

Supply and fixing in repair MCCB, 415 volts, 4pole TPN rating 63 Amps, 16Ka breaking capacity as incomer thermal magnatic type complete all asspecified

Taking down of existing ceiling fan from any height opening and dismantling for greasing,oiling ,change of bearing/bush, rewinding if required etc and painting blades, rod and fans and make serviceable with required items at site complete if unserviceable in situ, paint with synthetic enamal paint by spraying including filling cavities with filler one coat after cleaning all dust writing MES No with black paint etc and hanging of fans at same location including clamp with nut/bolt and rubber bush of any make connecting up including provision of cable from ceiling rose to fan comlete all as specified and directed by Engr-in-Charge.

Supply and fixing LED building security light 20Watt with suitable GI bracket with 02 Nos of clamp with all fitting and complete electric connection as per site required complete all as specified and directed by Engr-in-Charge. Make: crompton Model:Astra Neo LSTS-20-CDL-M or Equivalent.

Supply and fixing the Exhaust fan 300mm sweep 230 volts, Heavy Duty metal body 50Hz with louver and complete accessories for fixing of Fan hole, clamps,nut-bolts, washers etc and connecting up provision of cable from ceiling rose to fan as per site required complete all as specified .

BYRAVESHWARA CONSTUCTION

LAKSHMI CONSTRUCTIONS

SRI LAKSHMI VENKATESHWARA ENTERPRISES

Kaveri Enterprise

S S BUILDERS

PRACHANIVA CONSTRUCTIONS

shashi shekar construction