Bangalore Division: Construction of G+2 building for CGSR room, labour rest room, merchant room, etc. at Bidadi (BID). Maintenance period is 12 months. COMPOSITE TENDER.

B-NON-SCHEDULED ITEMS

B1-NON-SCHEDULED ELECTRICAL ITEMS

Item Breakup - A-DSR - 2021

of 88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 68 18.7.3 25 mm nominal dia Pipes Metre 50 408.55 20427.5 BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 69 18.8.2 20 mm nominal dia Pipes Metre 60 513.75 30825 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded 18.9 fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 70 18.9.3 25 mm nominal dia Pipes Metre 60 370.65 22239 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 71 18.15.1 15 mm nominal bore Each 16 303.85 4861.6 Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 72 18.17.1 25 mm nominal bore Each 1 532.35 532.35 73 18.17.4 50 mm nominal bore Each 1 878.25 878.25 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 74 18.18.3 25 mm nominal bore Each 2 399.15 798.3 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Litre 10000 9.7 97000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 75 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 19.0 DRAINAGE Extra for depth beyond 45 cm of brick 19.31 masonry chamber : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of 19.35 cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 76 19.35.1 450 mm dia RCC pipes. Metre 25 2385.5 59637.5 21.0 ALUMINIUM WORK BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent Kg 150 433.95 65092.5 or dyed to required shade according to IS: 77 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent Kg 135 531.8 71793 or dyed to required shade according to IS: 78 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 40 1019.8 40792 79 (weight not less than 10kg/sqm) 22.0 WATER PROOFING 22.3 Providing and laying water proofing Sqm 140 774.25 108395 treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm 80 cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). 26.0 NEW TECHNOLOGIES AND MATERIALS 26.41S NEW TECHNOLOGY ITEMS BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY Providing and laying factory made Precast concrete solid blocks of 200 mm thickness 26.68 of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: 26.68.1 Cement mortar 1:6 (1 cement : 6 coarse cum 65 6057.95 393766.75 81 sand) Providing and laying factory made Precast concrete solid blocks of 200 mm thickness 26.69 of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level 26.69.1 Cement mortar 1:6 (1 cement : 6 coarse cum 150 8086.6 1212990 82 sand) Providing and laying half block masonry with factory made Precast concrete solid blocks of 100 mm thickness of grade M10 26.71 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level: 26.71.1 Cement mortar 1:4 (1 cement : 4 coarse Sqm 30 913.6 27408 83 sand) Total 13578946.44

Item Breakup - B-NON-SCHEDULED ITEMS

Hiring of Truck with covered body of 2 MT Day capacity for one shift of 8hours running upto 80km as directed by the Engineer - in - charge.[Ref: USSOR 2011 item no 021510 - 21% zone G +28.88% 2024-25](2175.49@ 101.82%=2215.08/-)

Selection of suitable site for drilling Each borewell by eletrical resistivity method for all diameters [Ref: LOA no:10811020101567 dtd 23-04-2024 Rate=872.98 @ 40%=1222.172@ 24.50% above=1521.604)

Drilling of borewell for specified depth for Metre 150mm dia [Ref: LOA no:10811020101567 dtd 23-04-2024 Rate=209.65 @ 40%=293.51@ 24.50% above=365.42)

Extra over 75m drilling for 150mm dia [Ref: Metre LOA no:10811020101567 dtd 23-04-2024 Rate=41.93 @ 40%=58.702@ 24.50% above=73.08)

Supplying and lowering and fixing in bore Metre unperforated MS casing pipe 6mm thickness 150mm internal pipe [Ref: LOA no:10811020101567 dtd 23-04-2024 Rate=932.57 @ 40%=1305.598@ 24.50% above=1625.47)

Supplying and fixing mild steel plug or Each screw cap 150mm dia [Ref: LOA no:10811020101567 dtd 23-04-2024 Rate=120.22 @ 40%=168.308@ 24.50% above=209.54)

Excavation and closing cable trench in all Metre type of soil 1000mm deep 450mm wide [Ref: LOA no:10811020101567 dtd 23-04- 2024 Rate=181.00 @ 24.50% above=225@46"41@

Laying of LTUG cable 4 core 25sqmm Metre including termination of cable at both end [Ref: LOA no:10811020101567 dtd 23-04- 2024 Rate=21.50 @ 24.50% above=26.77) BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Supply and provision of HDPE pipe 16 Metre kg/sqcm 50mm dia P-63 with clamping [Ref: LOA no:10811020101567 dtd 23-04- 2024 Rate=271.00 @ 24.50% above=337@46'41@

Supply at site errection, testing and Each commissioning of electrical operated 6Hp/50 stage pump [Ref: LOA no:10811020101567 dtd 23-04-2024 Rate=30503.00 @ 24.50% above=37976.24)

Supply at site errection, testing and Each commissioning of control panel suitable for above pump [Ref: LOA no:10811020101567 dtd 23-04-2024 Rate=10000.00 @ 24.50% above=12450.00)

Supply submercible cable as per technical [Ref: LOA no:10811020101567 dtd 23-04-2024 Rate=142.45 @ 24.50% above=177.35)

Design, supply and provision of earthing Each arrangement with 50mm dia class C GI pipe [Ref: LOA no:10811020101567 dtd 23-04- 2024 Rate=4296.00 @ 24.50% above=5348.52)

Manufacturing, supply and fixing precast Sqm designer compound wall with post and panels (Panels of sizes of size 1.80mtr X .30 mtr, 50 mm thick) along with vertical post of 2.40 mtr height [for 1.8mtr height compound wall with steel reinforcement and M-35 grade of concrete with contractor's men & materials including lead & lift etc., complete and as approved by the Engineer - in - charge.

Structural design and architectural planning Each of CGSR building with complete details such as loading details, design of beams , columns foundation slab etc with complete details.Contractor has to submit calculation sheets and drawings as approved by the engineer in charge and proof check from recoganized Institute [Ref: LOA no:10811020101567 dtd 23-04-2024 Rate=100000.00 @ 22.50% above=122500.00) Total 1721478.24

Item Breakup - B1-NON-SCHEDULED ELECTRICAL ITEMS

Excavation and closing of cable trench in all Metre types of soil, 1000 mm. depth, 450 mm..wide and refilling trench with excavated soil, ramming, consolidating and bringing the surface to its original level including supply of all required materials.

Cutting of RCC foundation/Tar road Metre ,excavation of cable trench of one feet depth & one feet width and refilling trench with excavated soil, ramming, consolidating and bringing the surface to its original level with suitable cement mixer/tar etc as per site condition. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Drilling in ground, below and across to Metre track/road by trenchless technology with uncoiling, stretching and laying of HTUG/LTUG cable duly laying the cable through HDPE pipe (LTUG cable alone will be supplied by railways to be collected at railway store)

Supply of HDPE pipe of 110mm outer dia Metre PE-80, PN-6 , with proper jointing , bends, clamps etc., as per site condition with all necessary accessories.

Uncoiling, stretching and laying of above Metre 110mm HDPE pipe in the trench

Uncoiling, stretching and laying of above Metre 110mm HDPE pipe in the trench

Uncoiling, stretching and laying of upto 4 Metre core 35 Sqmm LTUG cable in the trench/duct/wall as per site condition through suitable HDPE pipe with proper terminations and handing over of released Cable/materials if any to concerned power depot incharge with proper account . (LTUG/HTUG cable alone will be supplied by railways to be collected at railway store)

Supply and provision of 4 way Bus bar Numbers chamberbox of 100A capacity with suitable copperbusbars with al necessary accessories for fixingon the wall/pole/in ground with foundation as persite condition.

Supply & fixing of class 'B' G.I. pipe 50 mm Metre dia on pole/wall/drain crossing with necessary clamping arrangements for UG cable including cost of all materials, labour charges complete

Supply and installation of ready to useIP54 , Numbers 6 way VTPN DB made out of CRCAsheet steel , powder coated with insulatedphase busbar, color coded interconnectingwire set , locking arangement completesuitable for provision of FPMCB/RCCB/RCBO as incomer and TP/SP MCBs as outgoings including allaccessories for fixing as per site condition.

Supply and Provision of FP RCBO of 40A Numbers rating , 100mA sensitiviity with front face indication for earth leakage fault.

Supply of IP43 , 12 way SPN DB made out of Numbers CRCA sheet steel , powder coated with insulated phase busbar, color coded interconnecting wire set , locking arangement complete suitable for provision of DP MCB/isolator/RCCB/RCBO as incomer and SP MCBs as outgoings including all accessories for fixing as per site condition.

Supply and Provision of DP MCB of 6A-32A Numbers rating with shortcircuit breaking capacity of 10KA.

Supply and provision of DP RCCB of 25A Numbers rating having sensitivity of 100mA

Supply and Provision of SP MCB of 6A-32A Numbers rating with shortcircuit breaking capacity of 10KA. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Supply and Wiring for circuit/ sub main Running wiring alongwith earth wire with Metre 2x1.5Sq.mm+ 1x1.5Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping including supply and laying of PVC conduit/casing and capping with all accessories like round block, ceiling rose, flexible wire for connecting lights,fan fittings etc as per specification. ( PVC conduit/casing and capping to be used as per site condition.)

Supply and Wiring for circuit/ sub main Running wiring alongwith earth wire with Metre 2x2.5Sq.mm+ 1x2.5Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping including supply and laying of PVC conduit/casing and capping with all accessories like round block, ceiling rose, as per specification. ( PVC conduit/casing and capping to be used as per site condition.)

Supply and Wiring for circuit/ sub main Running wiring alongwith earth wire with 2x4 Sq.mm Metre + 1x4Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping with cable termination using suitable crimping socket i n c l u d i n g supply and laying of PVC conduit/casing and capping. Vertical Runs of Light & Fan Circuit can be bunched with Circuit mains by suitable Junction Boxes as per specification( PVC conduit/casing and capping to be used as per site condition.)

Supply and Wiring for circuit/ sub main Running wiring alongwith earth wire with 2x6 Sq.mm Metre + 1x6Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping with cable termination using suitable crimping socket i n c l u d i n g supply and laying of PVC conduit/casing and capping. ( PVC conduit/casing and capping to be used as per site condition.)

Groove cutting & Fixing of above conduit Metre duly concealed in wall / ceiling

Supply concealed metal switch box for 12 modules complete with mounting cover plate of suitable colour& texture as per site condition including all accessories.

S u p p l y and fixing of modular type Numbers concealed metal switch box for 8 modules complete with mounting cover plate of suitable colour& texture as per site condition including all accessories.

Supply of modular type concealed metal Numbers switch boxes for 4 modules complete with mounting cover plate including all accessories.

Supply and provision of 6A SP modular Numbers 148.00 switches ISI marked

Supply and provision of 6A modular socket Numbers with safety shutter ISI marked BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Supply and provision of 6 / 16A modular Numbers multi pin socket with ISI mark, safety shutter and 16A switches with neon indication with ISI mark.

Supply and provision of 4 module MCB Numbers protected plug and socket of 25A rating with SP mini MCB and all necessary accessories complete

Supply and fixing of 5 star rated 1200 mm Numbers sweep BLDC ceiling fan with suitable electronic regulator, fan hooks with all necessary accessories as per specification

Supply and fixing of 36W panel light fitting Numbers cool white type recess/surface mounted , 600mmx600mm with housing made of pressure die cast aluminium alloy corrosion resistant powder coated with driver and conforming to specification No.SWR /LED LIGHT FITTING(Indoor/Out door)/001-2016 dt 18.04.16

Supply and provision of angle holder for Numbers LED bulb with all necessary accessories

Supply and provision of 15W LED bulb BEE Numbers 5 star rated

Supply and fixing of 20 Watt , 230 Volt AC Numbers supply ,50 Hz batten type aluminium extruded 4 feet LED light fitting along with lamp & driver with all connected materials( Ceiling rose, round block,screws,guttas, round flexible wire etc.) and conforming to s p e c i fi c a t i o n No.SWR /LED LIGHT FITTING(Indoor/Out door)/001-2016 dt 18.04.16

Supply and fixing of 18 Watt LED sleek Numbers surface/recess mounted type down light fitting along with lamp & driver, proper clamping arrangements based on site condition with all connected materials conforming to Specification No.SWR /LED LIGHT FITTING(Indoor/Outdoor)/011-2016 dt:18.04.16

Supply and fixing of aesthetic LED mirror Numbers light of 10/12Watts with driver and all necessary accessories.

Supply of BLDC 300MM Heavy Duty Exhaust Numbers Fan Operating Voltage 230 V AC Single Phase 50 HZ. Rated Speed 1400 RPM, Power rating of 56W, Rated Air Delivery 1900 CMH, Having Power Factor > 0.9, Metalic Blade And Body with all necessary accessories for fixing.

Installation of exhaust fan in the existing Numbers opening as per site condition .

Supply and provision of infrared motion Numbers sensor 360 degree detection, range upto 12m distance , IP 20 ,capacity upto 300W with all necessary accessories. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Installation and commissioning of Split AC Numbers (Excluding accessories )as instructed by SSE incharge .The scope of work includes the following. a) Mounting/Fitting of indoor and outdoor units at the respective locations. b) Laying of refrigerant piping and connecting with indoor and outdoor units after drilling hole/holes in the wall, if required. c) Charging Refrigerant gas in the unit. d) Suitable electric wiring between indoor unit and switch upto 3 meters length. e) Testing for satisfactory working without any abnormal noise as well as leakage test of entire system.

Design, supply and fixing of weather proof, Set shock proof, free from pilferage meter box having housing three phase energy meter and 40A FP MCB at outgoing of energy meter, with viewing window including supply and fixing of Digital three phase energy meter 5-30A and 40A FP MCB including all accessories like mounting screws, concealed metal hinges etc., for fixing of meter box as per site condition

Design, supply and installation of mobile Numbers charging unit made out of MS sheet CRCA 1.2mm Thick, powder coated , IP 20 of dimensions 360mmx260mmx 100mm with 4 Nos of 6A sockets and 2 Nos 1 Module USB charging units having 6A switch for individual sockets and 6A MCB in the incoming with mobile holding tray of size 250mm x 150mm and 4 Nos mobile holding pockets mounted on sides(detachable) as per drawing attached including IR logo, stickering , fixing arrangements on the wall/steel girder as per site condition. sample to be supplied for approval.

Supply and commissioning of 2 KVA online Numbers UPS having single phase input and single phase output with 12V- 84Ah sealed maintaenance free batteries 8 Nos (96V DC) along with suitable stainless steel tray for batteries with all necessary accessories as per specification.

Supply and fixing of modular type Exhaust Numbers fan of sweep 150mm including clamps and all necessary accessories for fixing.

Supply and fixing of 90 Watt ,230 Volt Numbers AC,50 Hz, IP66, LED street light fitting along w i t h l a m p & driver with all connected materials for proper fixing and alignment conforming to specification No.SWR /LED LIGHT FITTING(Indoor/Out door)/011-2016 dt 18.04.16

Design, Supply and erection of single side Numbers G.I cross arm for holding street light fittings including all auxiliary accessories for fixing/ welding as per site condition.

Supply, installation and commissioning of Set solar water heating system of 200 LPD capacity evacuated tube collector type, with heat exchanger, Electrical backup heater,Steel including associated civil works for installation as per specification attached. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Design,supply and erection of earthing Numbers arrangement material with 50mm dia, class C, GI pipe including all auxilliary accessories as per drawing and specification.

Supply and extension of earth continuity Metre from earth pit to metering bunk by 8 SWG GI wire including all auxilliary accessories. Total 1664133.00