REPAIR TO LEAKAGE / SEEPAGE AND SUNKEN FLOOR TREATMENT TO OTM / MD ACCN AND CERTAIN B/R REPAIRS TO OFFR MD ACCN / MNS MD ACCN AT CHAFB

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Coloured Non -skid ceramic tiles 7 to 8mm thick (square /rectagular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors set jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of CM (1:6) 15 mm thick, complete all as specified and directed.

Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to matchincluding screed bed of CM (1:6) 15 mm thick, complete all as specified and directed.

25 mm thick Cement concrete type B0 1:2:4 using 20 mm graded stone aggregate as in levelling concrete finished even and fair to recive floor finshes, complete all as specified and directed.

Granite (of any type) stone slab 16 to 20 mm thick (table rubbed and polished), in Kitchen platform etc. laid over cement screed bed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.

Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, including and over rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting, complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with WPC as per manufacturers instruction, complete all as specified and directed. Note : WPC will be paid seperately.

Applying evenly a coats of water proofing chemical NITTO Proof 120 of FOSROC over a coat of NITTO Primer of FOSROC over concrete surfaces/ plastered surfaces for floor and wall surfaces of sunken floors, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removal of debris to outside of MD area, complete all as specified and directed.

Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) in plinth protections and similar works inculding necessary form works, complete all as specified and directed.

40 mm thick PCC (1:2:4) using 40mm graded aggregate in floorings finished cement concrete surface even and smooth with out using extra cement, complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including taking down cement plaster on brick or concrete or stone walls including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even etcincluding taking down cement plaster on brick or concrete or stone walls including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Rendering 10 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cementincluding taking down cement plaster on brick or concrete or stone walls including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer, complete all as specified and directed.

Preparing new plastered surface of walls and applying three coats of white wash, complete all as specified and directed.

Preparing newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and stacking at site where directed, complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sq. M each and stacking at site where directed, complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and stacking at site where directed, complete all as specified and directed.

35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers supplied and fitted to chowkats, fixed as in repairs, complete all as specified and directed.

30 mm thick Second class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats, fixed as in repairs, complete all as specified and directed.

30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated, fixed as in repairs, complete all as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer, complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame, fixed as in repairs, complete all as specified and directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed as in repairs, complete all as specified and directed.

Steel windows/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay, complete with glazing bars, devetailed or welded incl painting with one shop coat of zinc chromate primer, fixed as in repairs, complete all as specified and directed.

All as item No 27 but without glazing bars, complete all as specified and directed.

4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane, fixed as in repairs, complete all as specified and directed.

Alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, fixed as in repairs, complete all as specified and directed.

100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed as in repairs, complete all as specified and directed.

75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed as in repairs, complete all as specified and directed.

150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, fixed as in repairs, complete all as specified and directed.

100 mm long Extruded Aluminium alloy handles, fabricated type, anodised, fixed as in repairs, complete all as specified and directed.

150 mm long Aluminium, anodised, barrel tower bolts of extruded section, fixed as in repairs, complete all as specified and directed.

100 mm long Aluminium, anodised, barrel tower bolts of extruded section, fixed as in repairs, complete all as specified and directed.

300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, fixed as in repairs, complete all as specified and directed.

Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O, fixed as in repairs, complete all as specified and directed.

Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) in hold fasts and similar works, complete all as specified and directed.

Taking down re-fixing the same existing Aluminium door carrying out repairs as required, removing the existing beading and fixing new rubber beading of suitable size with adhesive, overhauling of floor springs including greasing and oiling as required each shutter area n. exc 4sqm, complete all as specified and directed. Note: floor spring & Pivot will be paid separately if replaced with new.

Double legged floor door stopper aluminium alloy with rubber etc., fixed as in repairs, complete all as specified and directed

Supply only pivot hinges suitable for aluminium door shutters, complete all as specified and directed.

Pivot hinges suitable for stainless steel door shutters, fixed in repairs, complete all as specified and directed.

110mm pvc traps 'P' or 'S', fixed as in repairs, complete all as specified and directed.

Vitreous Ware wash down water closet (Pedestal), white (ETWC) with seat cover(fancy type ETWC connected with flush tank), fixed as in repairs, complete all as specified and directed.

10 Litres capacity dual type PVC low level SLIMLINE Flushing Cistern with brackets, fixed as in repairs, complete all as specified and directed.

500 ltrs capacity potential moulded polyethylene water storage tank (cylindrical or vertical) hoisted and fixed in position including dismantling existing water tank all as specified in SSR Part I, fixed as in repairs, complete all as specified and directed.

All as per item No 47 here-in-before but 1000 ltrs capacity, fixed as in repairs, complete all as specified and directed.

Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand, fixed as in repairs, complete all as specified and directed.

15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repairs, complete all as specified and directed.

15 mm fancy type bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed as in repairs, complete all as specified and directed.

15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, fixed as in repairs, complete all as specified and directed.

Removing plants/herbs grown on walls/junctions with roots using herbicide chemical,rendering and making good of existing brick/ concrete surfaces up to 6th storey, complete all as specified and directed.

Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of weight between 61 to 80 Kg, fixed as in repairs, complete all as specified and directed.

Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges, fixed as in repairs, complete all as specified and directed.

Brass chromium plated shower rose 125 mm size, fixed as in repairs, complete all as specified and directed.

Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, fixed as in repairs, complete all as specified and directed.

Waste fittings brass chromium plated with PVC outer cover, 40 mm dia for stainless steel sink, fixed as in repairs, complete all as specified and directed.

20 mm curtain rods of aluminium annodised powder coated fixed in existing brackets, fixed as in repairs, complete all as specified and directed.

Curtain rods brackets aluminium annodised powder coated, fixed as in repairs, complete all as specified and directed.

4 levers Brass Mortice lock, vertical type,of Size 100mm all as specificed in SSR Part-I, fixed as in repairs, complete all as specified and directed.

Hacking out old broken glass any thickness , size quality or description from wooden / steel frame fixed with wooden beads/ metal pinning and supply & fix 4mm thick sheet glass in Squares not exc. 0.5 sqm in each pane fixed with wooden beads or putty (in metal frames ) complete all as specified up to 4th storey, complete all as specified and directed.

Stainless steel wire cloth,0 .36mm nominal dia of wire and average width ofaperture 1.40mm and fixed with stainless steel wire staples, fixed as in repairs, complete all as specified and directed.

Easing of door / window shutters of any size/ any number of panels for easy closing/ opening / tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding door bolts etc., complete all as specified and directed.

Aluminium handles cast type anodized 125mm, fixed as in repairs, complete all as specified and directed.

Aluminium handles cast type anodized 100mm size, fixed as in repairs, complete all as specified and directed.

32mm dia. PVC waste pipe for WHB 60cm long with union, fixed as in repairs, complete all as specified and directed.

Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc., fixed as in repairs, complete all as specified and directed.

Welding mild steel members of thickness n exc 6mm welds n exc 2.5cm in length, fixed as in repairs, complete all as specified and directed.

Plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixed as in repairs, complete all as specified and directed.

Bathroom cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall, fixed as in repairs, complete all as specified and directed.

Stainless steel plate rack of size 990.60mm x 914.40mm including fixing to wall as directed etc, fixed as in repairs, complete all as specified and directed.

Taking down existing steel window/ventilator shutters area n exc 1 sqm each and carrying out necessary servicing including mild steel box type hinges, mild steel handles, nuts, bolts, washers etc and welding/greasing/oiling etc for smooth functioning and taking down unserviceable hardwares and refixing with new hardwares and re fixing the window shutters in position all as specified and directed. Note : (i) Windows are to be fixed upto 6 storeys of buildings (ii) Hardwares wherever required to be replaced with new Hardwares

Mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nut, bolt and washers, fixed in repairs, complete all as specified and directed.

300mm, ordinary rat rail rod pattern springs including roller and roller plate, fixed as in repairs, complete all as specified and directed.

19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, fixed as in repairs, complete all as specified and directed.

125mm aluminium anodised Hasp and staple, safety type fixed with screws, fixed as in repairs, complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position, complete all as specified and directed.

Demolition and breaking up drain pipes of 100mm internal dia ( Salt glazed ware, AC or Reinforced concrete ) set in cement mortar, complete all as specified and directed.

Demolition and breaking up drain pipes of 75mm internal dia ( Salt glazed ware, AC or Reinforced concrete ) set in cement mortar, complete all as specified and directed.

Cutting holes for pipes for a superficial area exceeding 150 Sqcm and not exceeding 400sqcm into or through brick walls built in CM and making good in cement mortar 1:3 or 1:2:4, type B1, complete all as specified and directed.

Cutting holes for pipes for a superficial area exceeding 150 Sqcm and not exceeding 400sqcm into or through stone wall built in CM and making good in cement mortar 1:3 or 1:2:4, type B1, complete all as specified and directed.

Removing building materials etc. (other than spoil payable under items -earthwork) to a distance of 1.5Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination, complete all as specified and directed.

Cement concrete type F2 (1:7:12) using 40mm graded aggregate as in foundations, filling and mass concrete in sunken floor, complete all as specified and directed.

Supply only integral WPC, complete all as specified and directed.

15 mm bore 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, fixed as in repairs, complete all as specified and directed.

20 mm bore 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc, fixed as in repairs, complete all as specified and directed.

Mild steel water tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old unserviceable 15mm steel water tubing and connections, fixed as in repairs, complete all as specified and directed.

Mild steel water tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old unserviceable 20mm steel water tubing and connections, fixed as in repairs, complete all as specified and directed.

Mild steel water tubes, 25 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old unserviceable 25mm steel water tubing and connections, fixed as in repairs, complete all as specified and directed.

Bib taps cast copper alloy CP fancy type with crutch or butterfly handle screwed down for iron pipe or brass ferrule of 15 mm bore, fixed as in repairs, complete all as specified and directed.

15mm bore stop valves brass chromium plated, screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipes, fixed as in repairs, complete all as specified and directed.

PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls, fixed as in repairs, complete all as specified and directed.

PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints laid in trenches, fixed as in repairs, complete all as specified and directed.

PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls, fixed as in repairs, complete all as specified and directed.

PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in trenches, fixed as in repairs, complete all as specified and directed.

PVC (SWR) bend with access door 110 mm bore, fixed as in repairs, complete all as specified and directed.

PVC (SWR) bend 110 mm bore, fixed as in repairs, complete all as specified and directed.

PVC (SWR) double branch piece, with access door 110 mm bore, fixed as in repairs, complete all as specified and directed.

PVC (SWR) Branch piece single equal or unequal with access door 110mm bore, fixed as in repairs, complete all as specified and directed.

PVC (SWR) junction single (Single T) equal or unequal with access door 110mm bore, fixed as in repairs, complete all as specified and directed.

PVC (SWR) 75mm bore bends any radius with access door, fixed as in repairs, complete all as specified and directed.

PVC (SWR) 75mm bore bends any radius, fixed as in repairs, complete all as specified and directed.

PVC (SWR) junction single (Single T) equal or unequal with access door 75mm bore, fixed as in repairs, complete all as specified and directed.

PVC (SWR) Branch piece single equal or unequal with access door 75mm bore, fixed as in repairs, complete all as specified and directed.

Stainless steel kitchen sinks with drainage board made of 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipes overall size 915mmx460mm bowl size 410mmx330mmx160mm, fixed as in repairs, complete all as specified and directed.

Stainless steel grating 125mm dia, fixed as in repairs, complete all as specified and directed.

PVC waste pipe 32mm size for WHB, fixed as in repairs, complete all as specified and directed.

PVC waste pipe 40mm size for sink, fixed as in repairs, complete all as specified and directed.

Health faucet, brass chromium plated with wall hook and 1.00m long flexible pipes, fixed as in repairs, complete all as specified and directed.

PVC connections 15 mm size with PTMT nuts of length 450mm, fixed as in repairs, complete all as specified and directed.

Vitreous china squatt pattern, Orissa Pattern size 580x440mm White,with integral Foot rests and 'P' or 'S' trap, white, including provision of fixing bolts and connecting upto drain and flushing pipe etc., fixed as in repairs, complete all as specified and directed.

75 mm bore PVC(SWR) floor trap, plain with grating including jointing with solvent cement, fixed as in repairs, complete all as specified and directed.

Preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat distemper oil emulsion, white or tinted, complete all as specified and directed.

Preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash including necessary scafolding upto 5th storey, complete all as specified and directed.

Preparation of plastered or un plastered old decorated surfaces of ceiling by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash including necessary scafolding upto 6th storey, complete all as specified and directed.

Wash basin hot and cold mixing valve swan neck type for 15mm bore pipe foam flow type, fixed as in repairs, complete all as specified and directed.

Brass chromium plated towel ring of approved make 200 mm dia, fixed as in repairs, complete all as specified and directed. Make: Cat No. 18032 of ARK orequilvalent make in JAQUAR

Wash basin hot and cold mixing valve wall mixture for 15mm bore pipe foam flow type, fixed as in repairs, complete all as specified and directed.

Stain less steel soap dish of approved make, fixed in repairs, complete all as specified and directed. Make: Cat No. 18092 of ARK orequilvalent make in JAQUAR

Stainless steel toilet paper holder of approved make, fixed as in repairs, complete all as specified and directed. Make: Cat No. 18051 of ARK orequilvalent make in JAQUAR

Sri Vijalakshmi Constructions