Improvement to road leading to Kandanamane Basavanna Temple and construction of a community hall under Bage GP in Sakaleshpura Taluk improvement to road to Omnagar under the jurisdiction of Ballupete GP road and drainage construction in Golagondae village under Belagodu GP road improvement within the limits of Mooguli village and road improvement from Kiruvale Road to Fatimapura under the jurisdiction of Udevara GP in Sakleshpur Taluk.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness by mechanical means using dozer in area of light jungle etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

Surface Drains in soil Construction of unlined surface drains of average cross-sectional area 0.40 m2 in soil to specified lines, grades,levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m as per Technical Specification etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 305-3.4 for embankment construction etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

KSRRB M401. Construction of granular sub-base by providing close graded material, mixing in a mechaical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications. A. Plant Mix Method. - For Grading IV Material etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

Construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and ,leads,transporting to site,spreading,grading to required slope and compacted to meet rerquirement of table No-300-2 etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

Providing and constructing un-reinforced plain cementconcrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregatesconforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixedside formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with alllead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm.etc. Complete with all lead and lifts and as directed by Engineer in charge of works.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (approx. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide) etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collor with cement mortor 1:2 but excluding excavation, protection works, backfilling,concrete and masonry works in head walls and parapets clause 1101.6 (C ) (1000 mm dia.) etc. Complete with all lead and lifts and as directed by Engineer in charge of works.

Supplying, Fitting and Placing TMT Fe 550/550D Steel Reinforcement including cost of all materials , machinery, labour, cleaning, straightening, cutting, bending,hooking, laping/welding joints, trying with binding wire/ soft annealed steel wire and other ancillery operations complete as per drawing and technical specification . h. All other type of structures etc. Complete with all lead and lifts and as directed by Engineer in charge of work.

Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar orks etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement ortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.. Size of Tile 600x600 mm etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification for 30 mm thick both side commercial etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and fixing bright finished brass butt hinges with necessary screws : 125x85x5.5 mm (heavy type) etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification for buildings etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm thik confirming to 1 2509 with suitable size beels, metal PVC powtion boxes, adhesive paste et, and running before concreting the slab the condut should be tied to the reinforcement rods by using bindung wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18%WG GI fish wire wherever nevessary 25mm dia 2mm thick etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying heavy gauge PVC Conduit Pipe 25 mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or 1 hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary etc complete with all leads and lifts and as directed by the engineer incharge of the work.

supplying and fixing PVC/Condutit Deep junction box 25 mm deep junction box etc complete with all leads and lifts and as directed by the engineer incharge of the work.

supplying and fixing Metal fan Box with Round Hook etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Point wiring using Copper wire without swich suppling and wiring adopting loop system in existing PVC conduit/ casing capping casing capping using 2x1.55qmm (phase &Neutral &1x1.0 sqmm (Earth wire)FRLS multi starand PVC insulated cooper wire 9confirming to IS-694:and latest amendments)without control switch shall be fixed on the existing plastic sheet/gang bov the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block complelte for each outlet short point upto 3Mtr form tapping point to out let via swich bod etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Point wiring using Copper wire without swich suppling and wiring adopting loop system in existing PVC conduit/ casing capping casing capping using 2x1.55qmm (phase &Neutral &1x1.0 sqmm (Earth wire)FRLS multi starand PVC insulated cooper wire 9confirming to IS-694:and latest amendments)without control switch shall be fixed on the existing plastic sheet/gang bov the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block complelte for each outlet Medium point adive 3mtr up to 6Mtrform tapping point to out let vi swich box etc complete with all leads and lifts and as directed by the engineer incharge of the work.

wiring for lighting/ power circuit using one of FRLS pvc grade, multistarand copper wire with low conduuctor resistance single core in open or concealed system of wiring with specified IS-694; confoirming to latest amendments 1.0 sqmm etc complete with all leads and lifts and as directed by the engineer incharge of the work.

wiring for lighting/ power circuit using one of FRLS pvc grade, multistarand copper wire with low conduuctor resistance single core in open or concealed system of wiring with specified IS-694; confoirming to latest amendments 2.5 sqmm etc complete with all leads and lifts and as directed by the engineer incharge of the work.

wiring for lighting/ power circuit using one of FRLS pvc grade, multistarand copper wire with low conduuctor resistance single core in open or concealed system of wiring with specified IS-694; confoirming to latest amendments 4.0 sqmm etc complete with all leads and lifts and as directed by the engineer incharge of the work.

supplying and fiush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates .the box should be firmly flush mounnted after due groove cutting Brick /Stone /C.C wall 3 way etc complete with all leads and lifts and as directed by the engineer incharge of the work.

supplying and fiush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates .the box should be firmly flush mounnted after due groove cutting Brick /Stone /C.C wall 10-12 Module etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying and fixing modular and concealed accessories on existing modular switch plate as per IS 3854 and 1293. 6 Amps one way switch etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying and fixing modular and concealed accessories on existing modular switch plate as per IS 3854 and 1293. 6 Amps one 3 way socket etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying and fixing modular and concealed accessories on existing modular switch plate as per IS 3854 and 1293.Stepped Fan Regulator Two Module etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying and fixing modular and concealed accessories on existing modular switch plate as per IS 3854 and 1293.32ADA Switch etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying and fixing modular and concealed accessories on existing modular switch plate as per IS 3854 and 1293.6/16AUniversal socket etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps.etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying and fixing, miniature circuit breakers on existing MCB distribution Isards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking, capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps DP etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying and fixing, miniature circuit breakers on existing MCB distribution Isards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking, capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 Amps DP etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying and fixing regular MCB distribution boards on wall / Wood board /flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MC B's single phase/3 phase/single door with powder coated painting Made out of 145WG MS enclosure 11- DoubleDoor 12 WaySI&N [Chapter-5. 1.no.5.19.9

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phasest wire whole current class-1 Accuracy Energy Meter etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Fabricating supplying and mounting MS box made out 10SWG suitable for Hoor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying of feet PVC Batten with integrated LED light fighting 1 x4-36/40 w with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Fixing all types and all capacities of fluorescent/ fals ceiling /spot light/CFL/LED fittings indoor on the wall/ ceiling/ rafters/ girders using 23/0.0076" twin twisted PVC insulated ires, requiered Nos of round blocks and clamps on wall/ ceiling/ Fafter/ Girders etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Supplying wallmounting fan suitable tooperate at single phase 230v AC, Supply 400 mm Sweep etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps ceiling rose, necessary length of 23/ 0.0076 inch PVC insulated twin twisted copper wire and wiring etc complete with all leads and lifts and as directed by the engineer incharge of the work.

Executive Engineer