Tender for the Work Of Construction Of Library Building At BWSSB Colony In T.K.Halli.(Reserved for SC-Category)

Tender for the Work Of Construction Of Library Building At BWSSB Colony In T.K.Halli.(Reserved for SC-Category)

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @0.465cum mach...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace /Chajjas /Sunken portion of WC:Bathroom, cold applie...

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after t...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elas...

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactur...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing and fixing floor mounted, white vitreous china singl piece,double traps syphonic water closet of approved brand make,shape, sizeand pattern including integrated white vitreous china cistern ...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

Providing and fixing brass stop cock of approved quality :20 mm nominal bore

Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) :32 mm nominal bore

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - ClassPremium

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :1500mmx450m...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm)

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

25mm dia 2mm thick

Supplying and fixing PVC/metal conduit deep junction box accessories. 19/20mm dia 2mm thick

25mm dia 2mm thick

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1...

Point wiring using copper wire with switch Supplying and wiring adopting loop system in existing PVC conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire with a 6Amps ...

Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch

Group A 1-2 module

10 Module 10-12 Module

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.6 Amps SP Switch.

6 Amps two way switch.

Electronic stepped regulator

16 Amps SP switc

6 Amps 3 way 5 pin socket.

32 Amps bakelite DP switch

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. 25mm

Supplying PVC flexible conduit pipe . mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF s...

Supplying and fixing of LED Bulkhead of 10W with IP65protection and IK08 impact resistance suitable for surface and wall mounting applications.Group A

Supply box type fluorescent tube light fitting of 4'- 36/40 watts fluorescent tube fitting, made out of MS sheet and stove enameled with low loss open construction copper wound ferromagnetic ballast, ...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying and fixing of shunt trip suitable for MCCB CBCT

Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. (Open Execution)

Supplying and fixing of class A (medium duty) GI pipe of wall thickness of not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 kv class (40mm)

Brass Cable Gland 45mm dia

Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper wire with low resistance conductor single core cable in open or concealed system of wiring.

Extra for supplying 4mm thick white plastic plate and covering for junction boxes or size ……mm conduit using necessary machine screws. 80mm

6Amps Lamps holder

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. A)6-32 Amps SP

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25*6 m Copper Strip

Supplying of 1.1kv LT UG cable XLPE or heat resistant pvc insulated, pvc extruded inner sheath armoured UG LT cable as per IS-1554 part-1 or IS -7098 part-1,armouring strip thickness in average +5% re...

Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 25 Sq mm to 75 Sq mm. In existing trench/duct .b)25...

On wall/structure b)25sqmm to 75sqmm

Digging of trench of 0.6m deep x 0.50 Mtr wide refilling the trench to the required ground level and consolidating etc., complete. b)In soil(hard)

HT CABLE - Group - A: Supplying and laying of high tension Dry Cure 3 core under ground XLPE (E) cable having stranded compact circular aluminum conductor, screened insulated, insulation screened with...

Supplying, fixing and wiring electronic 10 to 40Amps Electro Mechanical single phase energy meter Group A 5-20Amps

Supplying, fixing , wiring earth electrode for grounding conduits IC cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5m long buried in a pit. The pit should be fi...