ADDITION ALTERATION AND SPECIAL REPAIR TO BLDG NO E14 JCOs MESS SQAEA AND LPR KHAMARIA UNDER GE (P) NO 1 JABALPUR

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nanital or similar pattern roof covering.

S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A

S & F mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specified and directed.

M&L suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600x600mm compressing of GI powder coated main runner of dimension 39mmx24mm x 0.8mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm + PPPCGS / 0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. (Make : Armstrong/Everest).

Demolition of brick masonry built in cement mortar all as specified.

Demolition of PCC (unreinforced) below or above ground level n exc 15 cm thickness and removing rubbish to a distance exc 50m at low laying area complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick joint free (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors laid over & including 15 mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, Double tiles charged tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and directed

ditto- all as per item No 9 above but in skirting laid over and including 10 mm thick plaster in CM 1:4 complete all as specified & directed.

M&L for glazed ceramic colour tiles 450X 350X 7mm thick as in vertical surface such as skirting/dados laid over & including 10 mm thick plaster in CM 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified & directed.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth w/o using extra cement complete all as specified & directed

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.

Supply only Integral water proofing compound all as spefied and directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete.

Along the external wall below concrete or masonry aron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M&L for applying two coat of distemper oil emulsion averaging minimum 3mm thick birla white wall care putty over a coat of alkali primer on wall/ceiling surfaces & smoothening the surfaces with sand papers etc., including complete removal of existing treatment of any description (such as OBD/ plastic emulsion/ interior/ exterior emulsion paint etc) before applying OBD on new/old surafaces all as specified and directed.

Material & Labour for preparation new/old plastered surfaces and walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)

S & F in repair WPC Door Frame 95x45 mm including all fitting making good after complete as directed as speicifed Make : Rajshree or equivelent

S & F in repair WPC double Door Frame 125x65 mm including all fitting making good after complete as directed as speicifed Make Rajshree or equivelent

S & F in repair 35 mm thick WPC Door including making good after complete as directed as speicifed Make : Rajshree or equivelent

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sash bar any numbers.

S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame atsite as per specification & drawing.

S&F precoated steel window Rolled formed GI Section ECO 4000 (Openable double rebate window) Providing and fixing of single rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 48 x 50 mm, centre mullion section 48 x 50 mm, shutter section 47 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter with a 20 mm provision for guard bars/grills and the sections cut to length mitre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. SS( stainless steel) heavy duty pivot hinges per shutter and window fitted with 5mm thick plain float glass with EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.

Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side 1mm prefemlaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in Kitchen cabinet (withshelves and partitions) inas per manuacturer's instructions complete all as specified & directed.

Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in cupboard (withshelves and partitions) as per manuacturer's instructions complete all as specified & directed.

S&F 40 mm dia , brass cupboard knobs fixed with nut ,screw and washer of mild steel bright complete

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with bead incl Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

S&F Figured glass 3.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples

S&F Aluminium handles 150mm size, cast type, anodised

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,

S&F Butt hinges 75 mm size, medium weight, cold rolled mild steel.

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete,

S&F in repair Aluminium handles cast type anodised of 200mm complete.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges incl bracket etc. fixed in repair.

S&F in repair Curtain dropary 25 mm dia PVC Coating mild steel fancy type rod of fancy type including brass and brackets with curtain rings of approved quality etc complete.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome

Demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mm

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia

S&F PVC (SWR) bends any radius 110mm dia

S&F PVC (SWR) bends any radius 75mm dia

S&F PVC (SWR) vent cowl 110mm dia

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

M&L for complete removal of existing surface of wall and applying two coats of cement base paint, over a coat of white cement primer complete all as specified and directed.

M&L colour Chequered cement concrete tiles glossy finish 30cm x 30cm x 30mm thick with grey cement and pigment , set, jointed filling match with exiting colour & pointed in neat cement slurry in floors with grey cement & pigment over 15mm thick screed in CM(1:6)

S&F in repair steel plate rack size 975x750x300mm as specified and directed.

S&F frame work such as grills, grating etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works conforming to Fe-410-0 complete all as specified and directed.

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass mortice lock (4 levers), vertical type, size 100mm long complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in bed block/hold fast blocks, padding, chajjas repair, benching and coping etc with & including necessary form work for fair faces of concrete, complete all as specified and directed

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including jointing with solvent, grinding, rounding to edges and polishing complete

Dismantling existing water storage tanks exc500 and n exc. 1000 liters capacity & removing from site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 1000 ltr capacity double layers (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

Ditto as per item No 68 but 20 mm complete all as specified and directed

S&F 15 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors incl cutting chasing and making good complete all as specified and directed.

S&F 20 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15 mm bore gun metal gate valve cast copper alloy, screwed down high pressure with wheel head, screwed both ends with crutch or butterfly handle for iron pipes complete all as specified and directed.

S&F in repairs Soap dish (CP) complete all as directed.

S&F in repairs Vitreous China Wash hand basin, white, oval shape, size 550 mm x 420 mm size counter top, excluding taps, chain & plug & porcelain stopper incl brackets, 40/32 mm dia PVC waste pipe, chromium plate coupling 32 mm dia, pedestal & cutting for and pinning ends of brackets or erecting stand Complete all as specified and directed.

S&F bib taps, 15 mm dia, cast copper alloy chromium plated fancy type long body, Long Nose with Wall Flange with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repairs.

S & F in repair 15mm dia Stop/angle valves, cast copper alloy chromium plated fancy type , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 50cm long brackets.

S&F Viterous china wash down water closet (pedestal pattern) with white seat cover including fixing bolts and CP jet system excluding flushing cistern and flush pipe but incl S or P trap complete all as specified.

S&F in repair PVC valve less, syphonic action type flushing cistern 10 liters capacity, low level white with inlet ball valve, float and handle including brackets flush pipe etc and fixed as in repairs complete all as specified and directed.

S&F 15 mm dia brass CP fancy wall mixer with L Bend for mixing hot & cold water screwed down for iron pipe and fixed as in repairs..

S&F 15 mm dia brass CP fancy Central Hole Basin Mixer with Popup Waste System with 450mm Long Braided Hoses for mixing hot & cold water screwed down for iron pipe and fixed as in repairs.

S&F in repairs brass chromium plated overhead shower with arm and flange complete.

Surface excavation n.exc 30cm deep & n. exc 15cm deep& setting out in soft/loose soil.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc n exc 10 sqm on plan and getting out in Hard/dense soil all as specified and directed

Returning filling in including spreading leveling watering and well ramming in layers n exc 25cm all as specified and directed

Removal of excavated materials n. exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

M&L for plain Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in sub basefilling and mass concrete all as specified and directed

M&L hardcore ( broken stone or boulders) of gauge n exc 63 mm deposited spread and leveled in layers n exc 15 cm thick watered and rolled / rammed to a true surface all as specified and directed

M&L for 75 mm thick plinth protection in/Subbase PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L flyash modular Birck curved on plan exc 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Supply and fixing 10 mm dia and over mild steel TMT bars, cut to length, bent to shape required cranking bending and binding with and including mild steel wire annealed not less than 0.90 mm dia.all as specified and directed.

Ditto but 6mm to 8mm dia as in stirips

M&L Reinforceement cement concrete in design mix M-25 (20 mm graded) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

Ditto as item above but in columns, pillars, piers, posts and struts etc.

Beams, cantilevers, bressummers, lintels over 1.5m span

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surface of concrete

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of (mangalore pattern and joints/lapping filled with silicon compound) any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws. (Make :Tata(duroshine)/Cril). including necessary cutting groves chasing to wall and making good with PCC 1:2:4 (20mm graded stone aggregate) & plaster in CM (1:3) complete all as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. (Make : Tata(duroshine)/Cril). complete all as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to factory store and making good disturbed surfaces of walls, floors, etc (Note : Concealed conduit and accessories will not be dismantled)

M&L for point wiring with 1.5 Sq mm, FRLS, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through existing concealed conduit on ceiling/wall, with and including continuous 1.5 Sqmm, FRLS, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc all as specified and directed for :- (Note : Conduit and accessories if required to be repalced will be measured and paid separately)

One light point/fan point controlled by one switch.

One switch socket combination out let 5 Amps on independent board.

One socket out let 5 Amps on the same board with other switches.

All as per item No 103 above but with 4 sqmm PVC insulated multi stranded copper conductor and 4 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board.

Supply & Fixing Modular type Switch single pole 16 Amps one way ISI marked all as specified and directed.

Supply & Fixing Modular type socket out let 2 in 1, 6/16 Amps ISI marked all as specified and directed.

Supply & Fixing Modular type Socket out let 6 Amps ISI marked all as specified and directed.

Supply and fixing Fan step type Regulator modular type, 120 watts, 230 Volt ISI marked all as specified and directed.

Supply & Fixing Modular type Switch single pole 6 Amps one way ISI marked all as specified and directed.

S&F moudular flush type metal boxes of 3 module with brass screw cup washers complete all as specified and directed.

S&F moudular flush type metal boxes of 6 module with brass screw cup washer complete all as specified and directed.

S&F moudular flush type metal boxes of 12 module with brass screw cup washer complete all as specified and directed.

S&F moudular flush type metal boxes of 18 module with brass screw cup washer complete all as specified and directed.

S&F moudular cover plate with grid frame of 3 module, suitable for fix switches, sockets and fan regulator complete all as specified and directed.

S&F moudular cover plate with grid frame of 6 module suitable for fixing modular switches, sockets and fan regulator complete all as specified and directed.directed.

S&F moudular cover plate with grid frame of 12 module suitable for fixing modular switches, sockets and fan regulator complete all as specified and directed.

S&F moudular cover plate with grid frame of 18 module suitable for fixing modular switches, sockets and fan regulator complete all as specified and directed.

Supply and Fixing Ceiling Rose Surface PVC type 65 x 50 mm two to three terminals.

Supply and Fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including 9 watts LED Bulb complete all as specified by engg in charge.

Taking down ceiling fan/Exhaust Fan, any type/size, after disconecting sealing cable end, dismantling blades and removing fan and blades to factory store.

Maintenance and checking of ceiling fan/exhaust fan of any size/type/make, checking the serviceability of all parts, electric connections etc. Preparation of old painted surfaces and painting with two coats of synthetic enamel paint of approved shade, reconnecting/hanging in original position, reconnecting the electric cables and testing complete, all as directed.

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by eng in charge Make : Bajaj/havells or equivalent

Supply and Fixing Exhaust fan, 230 Volt, 50 Hz, Single Pole, 300 mm sweep, complete with louvers and all accessories, including making necessary opening in the wall, fixing on wall using necessary nuts, bolts and washers all as directed.Make:Bajaj/Havells or equivalent

Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start polycarbonate housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make Philips/Havells or equivalent

Supply & fix in replacement of LED Security Light Luminaire 36 watt with 2500 or more lumen warm white, surge protection device upto 4KV, IP65/66 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make: Philips cat part no: BRP046 LED36/CW MR S1 PSU GR or Havells or equivalent in wipro/GE

S & F LED Mirror light fitting 2 ft tubelight 10 watt aluminum housing and integrated electronic driver THD max 10 % ,CRI min 80 % complete with fixing arrangements on wall all as specified and directed.Make- Havells Cat part no:LUMILINE+BS10WLED865SPCSS SI or equivalent Philips/wipro

S&F LED in repairs light fitting square 600x600 mm not less than 40 watt along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make: Philips cat part no: RC375B LED 36S/840 PSU W60 L660 S2 WH or equiv in Havells or equivalent. Note:Color should be required as per site requirement either cool white or warm white.

Taking down Old un serviceable DB/Switch fuses complete with all accessories, any type/capacity complete, after disconecting cable connection, and remove to factory store.

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.Make: Legrand cat no :5076 21 or eq in SEIMENS /GE

S&F in replacement MCB Single Pole and Neutral 240Volt, upto 40 Amps,10KA breaking capacity complete all as specified & directed.Make: Legrand cat no :4086 18 or eq in SEIMENS /GE

S&F in replacement MCB Single Pole 240Volt, upto 40Amps,10KA breaking capacity complete all as specified & directed..Make: Legrand cat no :4086 90/92/93/94/95/96 or eq in SEIMENS /GE

M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS, cable with copper conductor of size 6 Sqmm in and including/drawing through through rigid non metalic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth complete all as specified and directed. Note :- 2 x 6 Sqmm conductor cable, 1 x 6 Sqmm conductor earth continuity cable & PVC conduit shall be measured as one unit length.

Taking down sub main wiring any size of two single core aluminium/ copper conductor cable PVC insulated alongwith/ without conduit and accessories and removing from site, making good the disturbed surfaces of wall and floor/ ceiling etc., complete and all as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron earth strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade crushed stone aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade crushed stone aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS TMT bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note :- GI earth strip 32 x 6 mm and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Schedule of credit amount of Rs. 49099.00 to be deducted during AOC

M/S BHATIA CONSTRUCTIONS (BID ID -3120328)

SHRI KRISHNA CONSTRUCTIONS (BID ID -3108266)