SPECIAL REPAIR TO BLDG NO T-03 (TSS SECTT) AT STN WORKSHOP EME UNDER GE (WEST) DELHI CANTT - 10

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for concerete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Taking up or down GI tubing 15mm bore and connections including all fittings complete all as specified and directed.

Taking up or down GI tubing 20mm bore and connections including all fittings, cleaning for refixing or removal to store complete all as specified and directed.

Taking down wooden/steel chowkhats/door/ventilator frame including shutter (without taking off shutter) not exceeding1.5 Sqm each complete all as specified & directed.

Taking down wooden/steel shutters from frames and re-fixing in same opening exc 2 sqm complete all as specified and directed.

Taking down wooden/steel shutters from frames exceeding 2 sqm each but not exceeding 4 sqm complete all as specified and directed.

Taking down of cement plaster of any description on brick or stone walls/ceiling including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including internal layer of terrazzo dado and mortar bedding removing rubbish off the premises complete all as specified and directed.

Demolition of brick work built in cement mortar and removing the debries out side MoD land complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, AC sheet etc.) or insulation boards/ slabs/blankets, any thickness, including cover fillets any description fixed in any position complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for powder coated aluminium snap grid frame work for false ceiling of size 605x605mm complete all as specified and directed.

M&L for gypsum board 12 mm thick in ceiling fixed with screws as per maufacturer's instruction coplete all as specified and directed .

M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium frame section size (127x38.10x1.74mm) @ 1.518 Kg/RM for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated aluminium, windows and ventilators shutters, side hung type with out sash bar, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing , anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long, hinges type B-21 100mm long and suitable handles ect complete all as specified and directed.

M&L powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5 mm thickness weight of 1.07 Kg/m (section No. 20831 of JINDAL) and of shutter size 40mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick ( section No. 20737 of JINDAL) sectio, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/fixture/aluminium snap beads complete all as specified. (Note : Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shallbe paid separately. Cost of glass and wire cloth included herein complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm with stainless steel wire staples, wooden beading etc complete all as specified and directed.

S & F 4mm thick sheet glass, ordinary quality glazing with rubber gasket in sqr exc 0.5 sqm in each pane etc complete all as specified and directed.

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors, laddewrs framed balustrers walkways railings frame work for roof covering & similar confirming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L 10 mm thick rendering of ready mix mortar of approved make of internal wall surface finished fair even and smooth without using extracement as whole or in patch complete all as specified and directed ..

All as per item No. 22 above but on external wall surface necessary sacffolding/safety measures be taken and no extra payments will be given for the scaffolding/safety measures.

M&L for vitrified tile of size 600mmx 600mmx8mm thick joint free light shade (square/rectangular) area of each tile n.exc 0.36 Sqm in floors etc set and jointed in neat cement slurrry and pointed in coloured cement to match over 15 mm thick scereed bed in CM 1:6 etc. complete .

All as per item No 24 here-in-before but on vertical surfaces of wall over & including 10mm thick cement plaster in cement mortar 1:4 etc. comnplete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces 450x350x7 mm /300x600x6 to 7mm thick joint free as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in cement mortar 1:4 on brick wall of concrete surfaces and finished fair and even complete all as specified and directed.

M&L for coloured non-skid jointfree ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match laid over & incl 15 mm thick scereed bed in CM 1:6 complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section, frame work for chajja with gusset plates, rails, braces and similar work etc complete drilled for fixing of steel sheeting or other covering. confirming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, pipes or flat sections) including distance pieces, cleats etc conforming Fe 410-W (Gde-E-250 quality -A) complete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for preparation of newly plastered surface of walls applying two coats of oil bound distemper over a coat of primer complete as specified and directed.

M & L preparation of newly plastered surface walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M & L preparation of old plastered surface walls and applying one coat of cement based paint complete all as specified and directed.

M & L preparation of old plastered surface walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old decoreated internal wall surface by complete removal of existing treatment by manual scrapping tools and applying two coats of Oil Bound Distemper with roller over a coat of wall care putty to uniform smooth surface not more than 1mm thick over a coat of primer complete all as specified and directed.

M&L for complete removal of old steel surface of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coats of red oxide primer including removing of existing paint with paint remover or suitable chemical complete all as specified and directed.

M & L for preparation of old painted surfaces including removal of pasted papers and filling deppressions of wood and wood based materials of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20 to 25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing over and including 20mm screed bed in cement mortar 1:6 including dismantling of existing tiles or cement mortar beddding of any thickness complete all as specified and directed.

M&L Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 50mm thick sand cushion/sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed coloured reflective type pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade, complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B0 using 12.5mm gradedaggregate as in interlocking path kerb complete all as specified and directed by Engineer-in-Charge.

M&L providing precast cement concrete (1:2:4) type B-1 (using 20mm graded crushedstone aggregate) as in shelves, kitchen slab, passage roof etc and set in cement mortar 1:4 complete all as specified and directed.

M&L for TMT bars 10mm dia , and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.

M&L PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair (75mm thick) with using extra cement.

M&L brick work built in cement mortar 1:4 using sub class 'B' bricks(using old size brick) straight or curved on plan exc 6 mtr mean radius using old size bricks complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

S&F Mild steel, plain, black sheet 1.6 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S & F in repair vitreous china ware wash hand basin (WHB) with pedastal white complete including pair of mild steel brackets fixed with fish bolt of suitable size duly painted, 32 mm dia chromium plated waste coupling , PVC waste pipe and cutting for pinning in ends of brackets in wall etc of size not less than 550mm x 400mm complete al as specified and directed.

S&F in repair brass CP bib taps long body 15mm bore with fancy type complete all as specified and directed .

S&F in repair vitreous padestal pattern (European type) water closet pan white with cast iron "P" or 'S" trap including fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe including provn of jet complete all as specified and directed .

S&F brass chromium plated health faucet with 1.2 mtr SS flexile pipe 15 mm dia fixed to angle valve complete all as specified and and directed

S&F in repair angle valve 15mm bore dia brass chromium plated fancy type, screwed down, new high pressure with lever type , chromium plated for iron pipe or unions complete all as specified and directed.

S&F in repairs PVC connection pipe of 450mm long and 15mm size with brass nuts complete all as specified and directed.

S&F in repair 15mm dia Pillar taps fancy type, cast copper alloy, with lever type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC flushing cistern 10 Ltrs capacity white valveless, syphonic action type flushing cistern, low level with inlet ball valve, float and handle, including brackets and pipe complete all as specified and directed.

M&L anti termite treatment alongwith external wall below concrete on machinery apron using chemical emulsion @ 2.25 ltr/Liner metre including drilling and plugging holes etc in apron complete all as specified and directed. (Note: Work be done through applicator approved)

M&L antitermite treatment of soil under existing floor using emulsion @ 1 Ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement and 2 coarse sand) to match the existing floor complete all as specified and directed. (Note: Work be done through applicator approved)

M&L antetermite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene base solution) @ 0.50 Ltr/Hole by drilling 6mm dia holes at a downward angle of 45 degreee at 150mm centre to centre and sealing the same complete all as specified and directed. (Note: Work be done through applicator approved)

M&L for TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.

M&L Reinforced Cement Concrete M-30 (20 mm graded aggregates) as in slab supported on walls, columns, beams, roof, landings and the like any thickness complete all as specified & directed.

Impregnating cream for injection into masonry or concrete wall 230mm thick against capilary rising humidity. Rising bar super strong (Product No. 201) of chowgale building chemicals or equivalent Pidilite/Drfixit/Sika/Phosrock complete all as secified and directed. Method of Appliction. Methodology. (a) The surface must be sound. absorbent, clean, free of dust, oil, paint, curing agents, loose cement or lime plaster & concrete, debris or any separation layer. (b) The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. (c) Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. All sharp edges/Joints need to be levelled. Loose concrete to be removed. (d) Drill boreholes at ground level horizontally. The bore holes are drilled horizontally into the masonry. (e) The holes should be drilled until a depth of approx 5 cm (for a 6mm thick wall) befor the end of the wall is reached. The boreholes should have a diameter of 12mm upto a maximum of 15mm and should be spaced approx 100 to 120mm apart and the vertical offset is 6cm max. (f) Before inserting Rising bar super strong or equivalent the boreholes must be cleaned from boring dust by using air pressure. It is not necessary to pre-wet the boreholes. (g) For applying the rising bar super strong or equivalent the dosing system inserted as fas as possible into the boreholes. While dosing the product uniformy, the injection nozzle is pulled out leading to a completely filled boreholes. (h) Treatment of highly absorbent masonry might require repeated filling of the boreholes. Dpending upon extent of damage. RisingBar Super Strong or equivalent can be re-injected in the same hole after 24 hours. Depending on absorbency, application or masonry thickness 0.1 to 0.15 litre/m with 10cm wall thickness.

Taking down carefully copper/aluminium point wiring (light/fan socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc and removing the material from site including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.

Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable 1.5 Sqmm size 1100 volts grade conforming to IS:694 in new GI boxes of 1.6 mm thick including cutting chases and one coat of synthetic enmelled black paint and providing new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :-

All as per srl item no. 69.00 here-in-before but One light/fan/Exhaust fan/bell point controlled by one switch.complate all as specified an as directed

All as per srl item no. 69.00 here-in-before but for one socket outet point 5 amps on the independent board complete all as specified and directed.

All as per srl item no. 69.00 here-in-before but for one socket outet point 5 amps on the same board complete all as specified and directed.

All as per srl item no. 69.00 here-in-before but with 3x 2.5 sq mm (Nominal area) FRLS PVC insulated unseathed and stranded copper wire conductor cable (phase ,neutral and earth wire) for 15 Amp power point complete all as specified and directed.

S&F switch Piano flush type SP, one way 5 Amps complate all as specified an as directed

S&F switch Piano flush type SP, one way 15 Amps complate all as specified an as directed

S&F socket outlet 2 in 1, 3 pin 5 Amps complate all as specified an as directed

S&F socket outlet 2 in 1, 3 pin 5 and 15 Amps, flush type complate all as specified an as directed

S & F 20 W LED 6500k decorative ultra slim linear led lighting fixture with extruded AI, heat sink , evironmently friendly , energy efficient ready to use pack complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size

S&F polycarbonate ceiling rose 3 pin flush type 6 A 250 V AC with ISI mark including ring for jumbo ceiling rose.

S&F in repair of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed. Cat Part No:DSMSCSPF006-32 Make: Standard

S&F in repair of double pole MCB SPN 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming all as specified and directed

Supply, laying and drawing in and including suitable size concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 4.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including taking down all as specified and directed.

M&L Sheet metal enclosure for DBs with single pole and nutral with two pin earth plug and socket complate with one single pole MCB 20 amps complte all as specified and directed.

M&L for earthing complete with GI earth plate electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not 2.25 Mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 Mtrs below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using GI strip 32 x 6 mm by means of bolts, nuts, chuck nuts, and washers made of galvanized iron and protected by medium grade 50 mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1:2:4 B-1 ( including excavation and earth work, disposal of surplus soil two a distance not exc. 50 Mtrs) all as specified and shown on plate No 5 of SSR – Part I 1991.NOTE:-(a). PCC pit shall be provided at list 500 mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipe and fittings, junction, elbow etc shall be deemed to be included in the unit rate. (b). RCC pit cover shall be pre cast of RCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighing not less than 4 Kg/ Sq m in lieu of cast iron cover.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply and fixing Flood light fitting 100 W IP 66 LED light fitting, energy saving & environmental friendly & robust open type vertical highbay/medium LED luminarie with high power as light SYMLTGsource, including complete fitting arrangements.

Taking down existing wall mounted fan, cable end dismantling blades and and painting with synthetic ennammeled paint by spraing including filling craveties and filter after one coat after cleaning and hanging and connecting provision of cable.

Supply and fixing metalic type Havey duty Exhaust Fan 400 mm ,1400 RPM , single phase , including cutting of holes in a round shape,fixing Nuts , bolts,plastering and fixing the fan complete all as specified.

m/s VK construction company

SHIVA ENTERPRISES

M/s M M BAHL