Provision of tensile fabric membrane structure shed at the entry of Ramanujan Hostel, VNIT, Nagpur (2ND call).

Provision of tensile fabric membrane structure shed at the entry of Ramanujan Hostel, VNIT, Nagpur( 2nd call).

Supplying and Installing in position, tensile fabric membrane (both PVDF coated) roofing with vertical and horizontal supporting with MS structure with one coat of primer and two coats of enamel paint of approved colour and shed as per approved architectural design and pattern with tensile fabric membrane both side PVDF night coated, One go coating ( minimum weight of 702 - 750 g/ms or equivalent and light transmission 7 to 8%) and 10 years warranty of SIEON/ SERGE FERRARI 782 S2 /MEHLER of German make or equivalent approved make, with necessary hardware , fastener , clamping accessories, pattern welding and tensioning of roof fabric membrane and fine turning /adjustment, disposal of rain water with provision of proper drainage as required complete with the rates including cost of all the necessary accessories, tools equipment etc. all complete as per specification and contractor has to submit the design / layout /details of the tensile fabric structure roofing with supporting MS structure provided by the manufacturer of the approved make along with the structural design and details of the members of the tensile membrane and supporting MS structure from Apollo/ TATA, so as to withstand wind loads, rain/snow loads, seismic forces, self weight etc. as per relevant IS codes, the responsibility to provide an alternate design ,structure details is sought. The work is to be carried out at all heights by taking all safety precautions, plan area will be measured for payment without any allowance for overlaps. Authorization certificate is necessary from OEM (Original Equipment Manufacturer) for tensile cloth. All structural design should be got approved from any NIT or IIT before execution. Cost is inclusive of necessary illumination/ lights etc. with proper wiring, switch boards and necessary electrical connections including M.S Pipe Structure of tensile fabric etc. Complete. Spec. No. As directed by Engineer in charge.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.0 m.) By Manual/Mechanical Means [Spec.No. : Bd.A. 1 Page No. 259]

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centring, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.). [Bd.E.4 Page No. 289 and B-7, Page No.38]

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, Bd.F.3 Page One Number 298 and B.7, Page One Number38

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel) Bd.F.5 Page One Number 300 and B.7,Page.One Number 38

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306

Plus GST as Applicable