Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.8 LAdmitted-Finance S NO 279 1 1A PLOT NO 113 KUTWAL COLONY SASTHE WASTI LOHEGAON PUNE 411 047 | PUNE | MAHARASHTRA | 411047 | ₹57.8 L | L1 | Admitted-Finance |
| 2 | L2₹64.3 L+₹6.5 L (11.3%)Admitted-Finance | ₹64.3 L+₹6.5 L (11.3%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical 11 82 GROUND FLOOR BLOCK 11 KALYANPURI EAST DELHI DELHI 110091 | EAST DELHI | DELHI | 110091 | - | - | Rejected-Technical It is seen from the uploaded document that the firm has not uploaded scanned copy of DD of Rs 1000 also hardcopy of the same has not received by this office till date |
| 4 | Rejected-Technical | - | - | Rejected-Technical The firm is two class below the requisite NIT class moreover not enlisted in the category of a ii and also not uploaded any details of similar nature of work done by the firm |
| 5 | Rejected-Technical 601 6TH FLOOR MANGOOR VALLEY NEAR GURUDWARA MANGOOR HILLL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | - | - | Rejected-Technical As per NIT requirement the firm is one class below the eligible class However it is also brought out that the firm has already crossed with residual work in hand of about more than 05 times its tendering limit However remarks of HQ CESC is YES |
| Sl No | Description | Qty | Unit | Shree Ram Enterprises L1 | M/S J D DESAI L2 |
|---|---|---|---|---|---|
| 1.00 | M & L for MS Special fitting of IS 1239 and wall thickness not less than 5mm any type spigot and socket ends or flanged pipe as required at site (such as bend, taper, Tee, flange, socket etc) Socket end/ flanged as ordered of any size from 80mm to 300mm as required at site including painting with one coat of red oxide primer and 2 coats of acrylic paint complete all as specified and directed.
Note: (i) The weight of the fittings shall be measured and paid as given in relevant IS or actually provided whichever is less.
(ii) All fittings shall bear relevant IS stamping marking and most adhere to the IS.
(iii) Excavation and earth work shall be measured and paid separately under respective item of BOQ.
(iv) Cost of the joints and jointing materials shall be deemed to be included in the relevant items of DI pipes here-in-before. | 350 | Kg | 280 ₹98,000 | 225 ₹78,750 Lowest |
| 2.00Supply and fix PTMT float valve of following sizes, with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed. | |||||
| 2.01 | PTMT float valve, 20 mm bore | 150 | Each | 380 ₹57,000 | 300 ₹45,000 Lowest |
| 2.02 | PTMT float valve, 25 mm bore | 150 | Each | 415 ₹62,250 | 400 ₹60,000 Lowest |
| 2.03 | PTMT float valve, 40 mm bore | 50 | Each | 540 ₹27,000 Lowest | 750 ₹37,500 |
| 3.00Supply and fix in repairs Gun metal gate valve, with iron wheel head screwed both ends for iron pipe as per IS-778 and fixed including taking out unserviceable one, complete all as specified and as directed of following sizes. | |||||
| 3.01 | Gun metal gate valve, 20 mm bore | 40 | EACH | 740 ₹29,600 Lowest | 750 ₹30,000 |
| 3.02 | Gun metal gate valve, 25 mm bore | 45 | EACH | 940 ₹42,300 Lowest | 950 ₹42,750 |
| 3.03 | Gun metal gate valve, 40 mm bore | 25 | EACH | 1,440 ₹36,000 | 1,050 ₹26,250 Lowest |
| 3.04 | Gun metal gate valve, 50 mm bore | 15 | EACH | 2,490 ₹37,350 | 1,250 ₹18,750 Lowest |
Tender Value
₹60 L
EMD Value
₹1.2 L
Closing Date
17 Jul 2026, 6:00 pmClosed
SHRI JITENDRA KUMAR MEENA IDSE EE
GARRISON ENGINEER (NW) VASCO Opposite KV No.2, School, Shantinagar, Vasco-Da-Gama, Goa-403802.
8241/E8
2026_MES_773184_1
8241/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
VASCO-DA-GAMA
Class C Category a (ii)
9 documents required · 9 mandatory
₹1,000
GE (NW) VASCO
₹1.2 L
Yes
13 Aug 2026
19 Jun 2026
24 Jul 2026
19 Jun 2026
17 Jul 2026
3 Jul 2026
19 Jun 2026 - 24 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M & L for MS Special fitting of IS 1239 and wall thickness not less than 5mm any type spigot and socket ends or flanged pipe as required at site (such as bend, taper, Tee, flange, socket etc) Socket end/ flanged as ordered of any size from 80mm to 300mm as required at site including painting with one coat of red oxide primer and 2 coats of acrylic paint complete all as specified and directed.
Note: (i) The weight of the fittings shall be measured and paid as given in relevant IS or actually provided whichever is less.
(ii) All fittings shall bear relevant IS stamping marking and most adhere to the IS.
(iii) Excavation and earth work shall be measured and paid separately under respective item of BOQ.
(iv) Cost of the joints and jointing materials shall be deemed to be included in the relevant items of DI pipes here-in-before. | 350 | Kg | - | - |
| 2Supply and fix PTMT float valve of following sizes, with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed. | |||||
| 2.01 | PTMT float valve, 20 mm bore | 150 | Each | - | - |
| 2.02 | PTMT float valve, 25 mm bore | 150 | Each | - | - |
| 2.03 | PTMT float valve, 40 mm bore | 50 | Each | - | - |
| 3Supply and fix in repairs Gun metal gate valve, with iron wheel head screwed both ends for iron pipe as per IS-778 and fixed including taking out unserviceable one, complete all as specified and as directed of following sizes. | |||||
| 3.01 | Gun metal gate valve, 20 mm bore | 40 | EACH | - | - |
| 3.02 | Gun metal gate valve, 25 mm bore | 45 | EACH | - | - |
| 3.03 | Gun metal gate valve, 40 mm bore | 25 | EACH | - | - |
| 3.04 | Gun metal gate valve, 50 mm bore | 15 | EACH | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
8241TenderDocuments.pdf
Tender Documents • 0.83 MB
BOQ_865834.xls
BOQ • 0.66 MB
8241.pdf
PDF • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .