Loading
Loading…
Loading…
Tender Value
₹5.0 L
EMD Value
₹9,995
Closing Date
9 Oct 2026, 1:30 pmClosed
Executive Engineer,Howrah Division, PWD
ONKARMAL JETIA ROAD HOWRAH
Emergent creation of aluminium partition wall at visitors room at District Magistrate office, Howrah along with repairing works at several location with some other ancillary works at 3rd floor and 2nd floor of New Collectorate Building, Howrah during
2026_WBPWD_5077109_2
WBPWD/EE/HD/NIeT67/2026/27
Open Tender
CIVIL WORKS
Percentage
15 days
Howrah Division, PWD, Onkarmal Jetia Road
Referred to Tender Documents.
4 documents required · 4 mandatory
₹9,995
2 Oct 2026
2 Oct 2026
12 Oct 2026
2 Oct 2026
9 Oct 2026
2 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 13.88
Removing white or colour wash by scrapping and sand papering and
preparing the surface smooth including necessary repairs to scratches etc.
complete | 136.35 | sq.m | 19.75 | ₹2,692.95 |
| 2 | 15.56
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground
within 50 metres lead. | 54.54 | sq.m | 54.65 | ₹2,980.67 |
| 3 | 13.2
15 mm cement plaster on the rough side of single or half brick wall of mix :
13.2.1
1:4 (1 cement: 4 fine sand) | 54.54 | sq.m | 399.45 | ₹21,786.4 |
| 4 | 13.80
Providing and applying white cement based putty of average thickness 1
mm, of approved brand and manufacturer, over the plastered wall surface
to prepare the surface even and smooth complete. | 152.99 | sq.m | 156.05 | ₹23,874.4 |
| 5 | 13.85
Applying priming coats with primer of approved brand and manufacture,
having low VOC (Volatile Organic Compound ) content. 13.85.3
With water thinnable cement primer on wall surface having
VOC content less than 50 grams/litre | 152.99 | sq.m | 73.95 | ₹11,313.76 |
| 6 | 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having
VOC (Volatile Organic Compound ) content less than 50 grams/ litre of
approved brand and manufacture, including applying additional coats
wherever required to achieve even shade and colour. 13.83.2 Two coats | 152.99 | sq.m | 142.8 | ₹21,847.26 |
| 7 | 21.1
Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and
IS: 1285, fixing with dash fasteners of required dia and size, including
necessary filling up the gaps at junctions, i.e. at top, bottom and sides
with required EPDM rubber/ neoprene gasket etc. Aluminium sections
shall be smooth, rust free, straight, mitred and jointed mechanically
wherever required including cleat angle, Aluminium snap beading for
glazing / panelling, C.P. brass / stainless steel screws, all complete as per
architectural drawings and the directions of Engineer-in-charge. (Glazing,
paneling and dash fasteners to be paid for separately) :
21.1.1
For fixed portion 21.1.1.3
Polyester powder coated aluminium (minimum
thickness of polyester powder coating 50
micron) | 127.88 | kg | 539.85 | ₹69,033.32 |
| 8 | 21.3
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with EPDM rubber / neoprene gasket etc. complete as
per the architectural drawings and the directions of engineer-in-charge .
(Cost of aluminium snap beading shall be paid in basic item): 21.3.2
With float glass panes of 5 mm thickness (weight not less
than 12.50 kg/sqm) | 14.4 | sq.m | 1,505.25 | ₹21,675.6 |
| 9 | 9.83
Providing and fixing aluminium die cast body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 35 kg and door width upto 700 mm), with
necessary accessories and screws etc. complete. | 12 | each | 1,124.85 | ₹13,498.2 |
| 10 | 9.100
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour or shade, with necessary screws etc. complete :
9.100.1 125 mm | 8 | each | 66.25 | ₹530 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.49 MB
Tendernotice_2.pdf
PDF • 0.57 MB
BOQ_5172926.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .