SPL REPAIR TO ROADS FROM APS MANDIR TO BLDG NO P-148 T LINE UNDER GE KAMPTEE

Amount

Excavating over areas not exc 1.5m deep and getting out in any type of soil complete all as specified and directed.

Rolling and consolidating road formation surfaces in cutting with 08 to 12 tonne power road roller, watering as necessary including filling in hollows and depression to required level, gradient and camber etc keeping roller wheel wet complete all as specified and directed.

Material and labour for 150mm (spread thickness) soling (or sub base) with broken boulders or quarried stone (Granite, trap or basalt stone), interstices filled, surface formed, rolled and consolidated to required gradient and camber and rolled with 8 to 12 tonne power roller complete all as specified and directed.

Material and labour for 150mm thick (compacted thickness) (in two layers of 75mm thick each) water bound macadam with coarse aggregate of granite/ basalt stone of grading 2, ranging from 63mm to 40mm, hollows made up to form true surface, spread surface binding with and including screening and moorum, watered, consolidated and rolled with 8 to 12 tonne power roller to required gradient and camber complete all as specified and directed.

Material and labour for preparing unsurfaced WBM surfaces by brushing with wire brush, for removing caked mud etc sweeping with broom & finally fanning the cleaned surface with gunny bag to remove loose dirt etc and applying evenly tack coat of paving bitumen VG-10 @ 10Kg per 10 Sqm complete all as specified and directed.

Material and labour for premix bituminous macadam (consolidated thickness 75mm or less consolidated with 4% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver and rolled with 8 to 12 tonne power roller to required gradient and camber complete all as specified and directed.

Material and labour for premix bituminous macadam (consolidated thickness 75mm or more consolidated with 4% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver and rolled with 8 to 12 tonne power roller to required gradient and camber complete all as specified and directed.

Material and labour for preparing existing black top surfaces by brushing with wire brush for removing caked mud etc sweeping with broom & finally fanning the cleaned surface with gunny bag to remove loose dirt and applying evenly tack coat of paving bitumen VG-10 @ 5Kg per 10 Sqm complete all as specified and directed.

Material and labour for bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver, rolled and compacted to required camber and gradient using power roller 8 to 12 tonne capacity complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed.

Material and labour for 150mm (compacted thickness) of moorum, spread, rolled and consolidating by power roller to gradient and camber as required in berms complete all as specified and directed.

Removing excavated material (soil) not exc 500m and deposited where directed at a level not exc 1.5m above the starting point beyond 500 m and upto total distance of 1.5 km complete all as specified and directed.

Material and labour for preparation of road surfaces and applying thermoplastic reflective painting marking 2.5mm thick single coat as in lines, dashes, arrows, letters, zebra crossing of 100/150mm wide using HOT MARK thermoplastic modern propelled road marking machine including all necessary ingredients such as binder, glass beads, titanium dioxide, calcium carbonate inter fillers, thermoplastic requirements for glass beads shall be table No 8004 of MORTH specifications including spraying of glass beads etc all as per manufacturer's instructions complete all as specified and directed. Note:- Application shall be carried out through mechanical applications by the approved applicator of the manufacturer of paint.

Supply and fix in repairs retro reflective boards of shape of rectangular 1m x 1.4m made out of 2mm thick stainless steel both side bounded/ pasted with high prismatic (IV) sheet as manufactured with desired letters/ logos / designed as directed. The board shall be supplied with and including stainless steel frame made out of 25mm dia pipe in frame around duly welded and embeded in PCC 1:2:4 type B-2 of size 0.45x0.45x0.60mtr including necessary earth work with and including stainless steel sheet and SS post of 38mm dia incl full length of 2.2mtr on one side and 2.8 mtr on other side complete all as specified and directed. Note:- The quoted rate should include PCC bed block & necessary earthwork in any type of soil.

Supply and fix in repairs 1000mm dia convex mirror made of PC material provided of size 50mm dia, MS pipe 2mm thick, two post duly powder coated for turning, intersections curves, T junction, parking lots etc and also held ideal for surveilance. It should be clear definite mirror image having 130 degree of viewing angle and unbreakable and strong than glass complete all as specified and directed. Note:- The following deemed to be included in the quoted rate:- i) PCC 1:2:4 type B-2 as in bed block of size 50x30x30 cm incl necessary earthwork in any type of soil. ii) Application of two coats of aluminium paint over a coat of primer to MS pipe or frame clamps etc.

NOTE : SCHEDULE OF CREDIT (Amount on page No 34 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.)

M/s Jagdish Staioners and General Stores (BID ID -3251978)

Bidder Name

M/s Jagdish Staioners and General Stores

M/s SHREE SAIBABA CONSTRUCTION