ADDTN/ALTN TO P-175 AND PROVN OF PAVER BLOCKS AND COVERED SHED AT MT SEC AT HQTC

Amount

COMMON ITEMS APPLICABLE FOR JOB 'A' & JOB 'B'

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified and directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and directed.

Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point.

Returning,filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils in soft/loose soil complete all as specified and directed.

M&L Plain cement concrete type D2 ,1:4:8 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L Plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L Hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

S&F Mild steel tubular trussed, purlins, fencing posts,crane gantries rails and fastenings including special shaped washer etc complete using ERW or induction butt welded tubes Conforming to IS 1161-1979 grade St -240 including distance pieces, cleats , nut & bolt any size & length etc complete all as specified and directed.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as complete all as specified and directed.

M&L Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxied primer complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6, finished even and smooth with out using extra cement complete all as specified and directed.

M&L Preparing new plastered surfaces and applying three coat of white wash on surfaces on walls complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed.

S&F Vitreous china wash down water closet (Pedestal pattern, ETWC), white (including fixing bolts, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

M&L Two coats of cement paint over a coat of primer plastered and other surfaces with alkali resistant priming paint through mechnical means including preparation of new surfaces, complete all as specified and directed.

S&F 200 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed.

Supply only liquid water proofing compound of approved quality complete all as specified and directed.

ITEMS APPLICABLE FOR JOB 'A'

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in flooring,finished even and smooth without using extra cement complete all as specified and directed.

M&L Virified Ceramic jointless tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. set and jointed in neat cement slurry over and including 15 mm thick screed bed of cement mortar 1:6 and pointed in white/ coloured cement to match complete all as specified and directed.

All as per item 22.00 here-in-before but as in wall skirting over and including 10mm thick rendering of cement mortar 1:4 complete all as specified and directed.

S&F Prelaminated particle board, 18/19mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F Internal auto closing concealed hinge complete all as specified and directed.

S&F 6" premium quality chrome finish Handle complete all as specified and directed.

S&F Good quality Telescopic channel set for drawer multi-tech high capacity 500 mm long complete all as specified and directed.

S&F 19-20mm wide and 0.80mm thick decorative type PVC beading complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles complete all as specified and directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts,piers, columns and stanchions for rough finished flat surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed.

M&L for RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

Use and waste of form work to side and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels beam,tie beam, cantilevers, shelves including supports, overhangs, etc. also splays between floors and rough finished, complete all as specified and directed.

M&L for RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in Beams, cantilevers, bressummers,tie beam,lintels over 1.5m span complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like all as specified and directed.

S&F TMT Bars 10mm dia and over, cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto,as Item No 38.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L Precast cement concrete block masonry with solid blocks type C1, 1:3:6 20 mm graded aggregate exc. 10 cm in width and setting in mortar 1: 6 complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. including mixing of water proofing compound wherever required as per manufacturers instructions and as direction by Engr in Charge (WPC shall be measured & paid separately). .

M&L fo Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement all as specified and direction by Engr in Charge.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar 1:6 and pointed with white or Coloured cement to match complete all as specified and directed.

M&L for Coloured Glazed ceramic design tiles 350x 250x 7mm/ 450X 300X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site including 3 nos 100mm long Stainless steel butt hinges and screws as per specification & drawing complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing complete all as specified and directed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 25 mm CPVC pipes SDR 11 with all fittings (elbow,Tee,bend etc.) and fixed, joint shall be fixed with adhesive and teflon tapes complete to wall / ceiling / floor complete all as specified and directed.

S&F fancy type 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs PVC connection 15mm size 450mmlong with CP PTMT nuts complete all as specified and directed.

S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs 32 mm dia waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs CP health faucet including one metre length SS connecting pipe complete all as specified and directed.

S&F in repairs angle stop cock with wall flange 15 mm dia chromium plated, screwed down, high pressure, screwed both ends for 15mm bore iron pipes or for unions, omplete all as specified and directed. Make-Jaguar Cat no-CON 059KN

S&F in repairs fancy type CP 2 way bib cock with wall flanges complete all as specified and directed.

S&F in repairs PVC Flushing cistern 10 Ltr capacity valveless syphonic action type low level, white, with inlet ,ball valve float and handle including brackets and flush pipe complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed with floor including necessary fixing cleats/ clamps, complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps complete all as specified and directed.

S&F PVC bends of 110 mm dia complete all as specified and directed.

S&F PVC bends of 75 mm dia complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of white colour triple layered (ISO certified) (cylindrical vertical with closed top ) hoisted and fixed in position of capacity 1000 liter, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F 1mm thick Plain/curved, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F WPC of 12mm thickness for facia complete all as specified and directed. Note : Colour and design shall be as directed by Engr-in-charge. Rate quoted shall be inclusive of design and fittings

M&L for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including a 20 mm thick screed bed of cement mortar 1:6 complete all as specified and directed.

M&L 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for floor including finishing the surface even and fair without using extra cement complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foot path, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S&F 6mm thick PVC panel fixed with Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for 20mm thick Granite work (Telephone Black/ Lakha Red) (table rubbed and premirror polished) in single piece in steps, shelves and platforms ant the like set & jointed in neat cement slurry including pointing in epoxy grout to match with shade of granite, laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Round chamfering, to the edges of marble slabs complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, ceilings, etc. Including racking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

M&L Rendering 5mm thick cement plaster in cement morter 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 2 coats of distemper oil emulsion in wall surfaces white or tinted through mechnical means over a coat of 1mm thick wall care putty, including preparation of new surface complete all as specified and directed.

M&L for 2 coats of distemper oil emulsion on wall surfaces white or tinted through mechnical means over a coat of 1 mm thick wall care putty, including preparation of old surface after complete removal of existing treatment complete all as specified and directed.

M&L for Preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of exterior emulsion paint (weather coat) on walls through mechnical means complete all as specified and directed.

M&L for Preparation of old decorated plastered or unplastered surface of walls including scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing on ceiling complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc. 4 sq. m each complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified and directed.

S&F Second class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F of 35mm thick IInd class hardwood factory made plain, framed, panelled shutters (any number of panels) factory made with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutter as in door open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chambered or rounded mitred and beads for securing glass etc. size of members of shutter as specified in SSR part-I, Sec-08, Clause 8.24(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 125 mm long Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150mm Aluminium handles, cast type anodised complete all as specified and directed.

S&F mild steel cold rolled parliament hinges with 150mm width of recess between flanges (when open) , complete all as specified and directed.

M&L Preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed complete all as specified and directed.

M&L Preparation of old painted surface of any description not otherwise described steel surfaces over 10 cm width of girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F Powder coating (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium sliding window and ventilator shutters, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed. Note : Sheet Glass and SS wiremesh shall be measured & paid separately.

S&F in stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including beads all as specified and directed

S&F in 4.8 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

M&L Concealed point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls or any type wall /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed for the following :- Note- Cost of Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit and modular sunken boxes shall be included in quoted rate. No extra payment shall be made for this.

One light point controlled by one single pole 5 Amps switch.

One ceiling fan point controlled by one single pole 5 Amps switch.

One exhaust fan point controlled by one single pole 5 Amps switch.

One 5 pin socket point 5 Amps on independent board.

One 5 pin socket point 5 Amps on same board with other switches.

One bell/buzzeer point controlled by one push button 5 Amps switch on independent board.

All as per item No-95.00 here-in-before but for power point wiring with 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp switch socket outlet on independent board complete all as specified and directed.

All as per item No-95.00 here-in-before but for power point wiring with 4.00 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 4.00 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp switch socket outlet on independent board complete all as specified and directed.

M&L for point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Capping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing on stone walls / brick masonary walls /ceilings /floors etc modular MS sunken boxes with earth doll for mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green.and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed for the following :-

One light point controlled by one single pole 5 Amps switch.

One ceiling fan point controlled by one single pole 5 Amps switch.

One exhaust fan point controlled by one single pole 5 Amps switch.

One 5 pin socket point 5 Amps on independent board.

One 5 pin socket point 5 Amps on same board with other switches.

One bell/buzzer point controlled by one push button 5 Amps switch on independent board.

All as per item No-98.00 here-in-before but for power point wiring with 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp switch socket outlet on independent board complete all as specified and directed.

All as per item No-98.00 here-in-before but for power point wiring with 4 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 4 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp switch socket outlet on independent board complete all as specified and directed.

S&F Modular switch,1 Module single pole one way 10 Amps complete all as specified and directed.

S&F modular socket , 2 Module 6 Amps, 5 pin, 230 volts AC complete all as specified and directed.

S&F Modular switch , 1 Module single pole one way 16 Amps complete all as specified and directed.

S&F Modular socket , 2 Module 6/16 Amps, 6 pin, 230 volts AC complete all as specified and directed.

S&F Modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified and directed.

S&F Modular type bell push flush type one way 6 Amp 230 Volt complete all as specified and directed.

S&F Call bell ding dong type 230 Volt single pole complete all as specified and directed.

S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals 230 volt complete all as specified and directed.

S&F modular white cover plate with frame, 1 module complete all as specified and directed.

S&F modular white cover plate with frame, 2 module complete all as specified and directed.

S&F modular white cover plate with frame, 3 module complete all as specified and directed.

S&F modular white cover plate with frame, 4 module complete all as specified and directed.

S&F modular white cover plate with frame, 6 module complete all as specified and directed.

S&F modular white cover plate with frame, 8 module complete all as specified and directed.

S&F modular metal flush box 1/2 module complete all as specified and directed.

S&F modular metal flush box 3 module complete all as specified and directed.

S&F modular metal flush box 4 module complete all as specified and directed.

S&F modular metal flush box 6 module complete all as specified and directed.

S&F modular metal flush box 8 module complete all as specified and directed.

S&F LED Light fitting, 4 feet 1 x 20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED mirror Light fitting 2 feet, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED fitting of size 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and directed.

S&F LED light fitting 9/ 10 Watts bulk head Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of 2.5 sqmm size from ceiling rose including street light brackets made out of 50 mm dia light grade GI pipe 1.50 mtr long bent to shape and size as per site requirement for fixing of street light fitting on poles/ walls including Flat Iron clamps=02 Nos of size 30x5mm made to shape incl nuts,bolts & washers complete all as specified and directed.

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, 1200 mm sweep. Min air delivery 210 CFM with service valve 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F Exhaust fan steel body AC single phase 230 V of size 380 mm sweep, 900 RPM with blades, and frame and louvers complete all as specified and directed.

S&F Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt, complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door SPN, 12 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt, complete all as specified and directed.

S&F MCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10KA complete all as specified and directed.

S&F MCB SPN, 40 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified and directed.

S&F Sheet metal enclosure for DB's double door TPN 04 ways including 01 No MCCB 125 Amp to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified and directed.

S&F Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 32 Amps complete all as specified and directed.

M&L Sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Capping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified and directed. Note-Two runs of 2.5 sqmm single core cable and one run of 2.5 sqmm earth wire including PVC casing & capping together shall be measured as one unit.

M&L Sub main wiring with two single core 4.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Capping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 4 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified and directed. Note-Two runs of 4.00 sqmm single core cable and one run of 4.00 sqmm earth wire including PVC casing & capping together shall be measured as one unit.

M&L Sub main wiring with two single core 6.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Caping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 6.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified and directed. Note-Two runs of 6.00 sqmm single core cable and one run of 6.00 sqmm earth wire including PVC casing & capping together shall be measured as one unit.

M&L for sub main wiring with four single core 10 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Caping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 10 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified & directed by Engineer-in-Charge. Note- Four run of 10 sqmm single core cable and one run 10 sqmm earth wire including PVC casing & capping together will be measured as one unit.

M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead up to test point with suitable size GI nuts/bolts, washers,check nut and brazed properly up to main board,LT panel etc and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10 mm thick with hinged and frame of angle iron 25x25x6mm with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15 mm bore up to main board complete all as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified and directed. Note: (i) The unit rate shall be included 15 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate shall be included galvanised iron wire 4 mm dia from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthing is recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the department.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia galvanised iron or steel wire complete all as specified and directed.

Material and labour for sand cushioning to under ground cable with locally available dry sand for protection of cable 8cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks/PCC cover ,punning of sand using suitable T&P as per site requirement complete all as specified and directed . Note- Punned thickness of sand i.e 18 cm to be consider for measurement purpose.

Supplying and laying un-reinforced precast concrete cable cover class LV, Type 1, flat, size 250x150x40 mm complete all as specified and directed .

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 70 sqmm 3.5 core and connecting up incoming/out going cables connection with suitable size lugs and testing complete all as specified and directed .

M& L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4mpa working pressure complete all as specified & directed by Engineer-in-Charge.

ITEMS APPLICABLE FOR JOB 'B'

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in mortar 1:6 , complete in walls complete all as specified and directed.

Supply, Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) for hard standing including finishing the surface even and fair complete all as specified and directed.

S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and directed.

SRI GANESH ENTERPRISES (BID ID -3392708)

EURO ENTERPRISES (BID ID -3393144)

raashi constructions (BID ID -3392823)

chowdeshwariconstructionco (BID ID -3392101)

B.B. Enterprise (BID ID -3392121)