PROVN OF STORE FOR LPG, K/OIL AND OXYGEN GAS CYLINDER OF MH, PROVN OF INTERLOCKING PAVER BLOCKS AT CERTAIN LOW LAYING AREAS AND PROVN OF FLOORING AND FALSE CEILING OF EXAM ROOM AT MIL STN GAYA

Amount

Excavating in trenches, n exc 1.5M wide and n exc 1.5M depth; for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc n exc 10 Sqm on plan and n exc 1.5M in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge

All as per item no 01 above but exc 1.5M depth but n.exc 3.0 m depth complete all as specified and as directed by Engr-in-Charge

M&L Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm in soft/loose soil

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge

M&L Brick work with flyash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as specified

M&L RCC M-25 Design Mix (using 20mm graded stone aggregate)Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as directed by Engr-in-Charge

M&L RCC M-25 Design Mix (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintel etc.

M&L RCC M-25 Design Mix (using 20mm graded stone aggregate) in Columns, pillars, piers, posts all as directed by Engr-in-Charge

M&L RCC M-25 Design Mix (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the like all as directed by Engr-in-Charge

M&L Damp proof course to horizontal incl all form works with 25 mm thick PCC 1:2:4 type B-0, mixed with water proofing compound,smooth finish surface.

Supply only Integral water proofing compound complete.

M&L Formwork to rough finished flat surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, also splays between floors and beam etc complete as all specified and directed by Engr-in-charge

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work;vertical or to batter

M&L Formwork to sides of pillars,posts, struts, piers, columns and stanchions all as specified and directed

M&L Formwork to soffits of suspended slabs such as roof slabs, landings and similar work; not excedding 200mm thick (horizonal or sloping) fair finished surface.

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide.

M&L Mild steel TMT bars 10mm dia and over cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

M&L Mild steel TMT bars 6 to 8 mm dia cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia

M&L Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth w/o using extra cement using water proofing compound all as directed by Engr-in-Charge.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth w/o using extra cement.

M&L Hard core of broken bricks of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface.

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) and finishing cement concrete surface even and smooth with using extra cement complete.

M&L Rendering 5 mm thick in ceilings on concrete surfaces in cement mortar 1:3, finished even and smooth w/o using extra cement complete all as specified and as directed by Engr-in-Charge

M&L Three coats of white wash on plastered surfaces including preparation of new plastered surfaces complete all as specified and as directed.

M&L Three coats of white wash on plastered surfaces including preparation of new plastered surfaces as in ceiling complete all as specified and as directed.

M&L Two coats of cement based paint including preparation of old/newly plastered surfaces complete all as specified and directed by Engr-in-Charge

M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and finishing surfaces even and smooth without using extra cement.

M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’

S&F Powder coated aluminium partition, frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Make : JINDAL / HINDALCO / INDAL. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

Supply only 5.5 mm thick sheet glass tinted single reflective quality and glazing with oil putty or fixing rubber gasket with aluminium frame in each pane

Supply only galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.

M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges

M&L RCC M-25 Design Mix (using 20mm graded stone aggregate) as in Chajjas

M&L 10 mm thick screed bed or bedding layer in CM 1:3 mixed with liquid water proofing compound using as per manufacturer's instrutions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs- (i) Cleaning and sweeping and washing down with water to remove all dust etc from plastered roof surfaces / walls and filling of crack with sealing compound etc (ii) Bituminous based primer conforming to IS: 3384 – 1965 at 0.3 KG per Sqm (iii) One layer of super thermo APP modified water proofing memberane with non polyester reinforcement of any make.( M/s STP texsa ltd/Hyperplas memberane of M/S IWL India Ltd / M/s STP and Tikki Tar Ltd). (iv) 3mm thick and minimum Weight @3.50Kg/Sqm,laid with gas torch and pasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surface after cutting necessary grooves and making good with PCC gola 1:2:4 type- B1 etc adhere to bitumen all as per manufacturer's instructions. (v) Applying two coats of aluminum paint @ 0.20 Kg / Sqm per coat over bitumen layer as per manufacturer's instructions. (application including sides lap,over laps shall be provided not less than 10 cm and jointed sealed with torch as per manufacturer's instructions specification and as per particular specifications complete all as specified and directed.

M & L Sand filling under floors for cushioning complete all as specified and as directed

M&L Aluminium dividing strips 1.5mm thick, inserted in position, conform to design width of strip 38 mm (n.exc 1.20 mtr x 1.20 mtr in panels) complete all as directed.

M & L Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M&L Providing, cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L Extra only over framed work for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc

M&L Applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel and iron surfaces

S&F Mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sq. metre

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in in riser of steps, skirting, dado and pillar including 10 mm thick rendering in cement mortar 1:3 complete.

M & L Plain cement concrete 40 mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) as in sub base for laying floor finishes

M&L Preparation of old decorated surfaces and applying 0.50 mm thick Birla white putty/JK white wall care putty on walls surfaces.

M&L Applying two coats of distempering with acrylic distemper as per manufacturer instructions white or tinted all as specified and directed.

M&L Suspended false ceiling system using chicago metallic (E Grid) exposed suspended system, grid section size 600 mm x 600 mm, comprising of GI powder coated Main Runner of dimensions 39 mm x 24 mm x 0.8 mm thick (Thickness comprising of GI/ 0.4 + PPPCGS/0.3mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick and wall angle 22.2 mm x 22.2 mm x 0.65 mm thick (Thickness comprising of GI /0.4 + PPPCGS/0.3 mm & weight of Tee of 0.195 kg for 600 mm length), and Wall Angle of dimensions 22.2 mm x 22.2 mm x 3050 x 0.65 mm thick (Thickness comprisingof GI / 0.35 + PPPCGS /0.3 mm & weight of angle 0.70 kg for 3050 mm length), with and including 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 3.15mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified and as directed. Make : EVEREST or ARMSTRONG

Surface excavation not exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soils.

M&L 100mm thick cement concrete type C2, PCC 1:3:6 (using 40mm graded stone agg) as in sub base of path/hardstanding for receiving floor finishes.

M&L Brick work in cement mortar 1:4 with sub class `B' bricks straight or curved on plan exceeding 6m mean radius with old size bricks as in pillars complete all as specified.

M&L Reinforced concrete pipes, 300mm dia class NP2, laid and jointed complete with collar complete all as specified and directed.

M&L Providing precast cement concrete 1;2:4 type B1 (using 20mm graded stone agg) as in manhole cover including necessary form work. Note:- Reinforcement shall be measured and paid seperately.

M&L Flame proof point wiring with FRLS multi-stranded copper conductor single core PVC insulated fire resistant cable 1.5 Sqmm size sheathed cable including 25 mm size steel conduit concealed flame proof wiring with all flame proof steel conduit fitting and accessories i.e junction box, inner/outer corners and inner/outer bends, tees etc. with continuous 1.5 sqmm PVC insulated fire resistant copper earth cable (green color) FRLS conneted to common earth including cutting chases to wall making good the disturb suface to match with the exisitng specification complete all as specified and directed by Engr - in - charge. (a) One light/fan point controlled by one No piano type switch 5 AMPS single pole one way

S &F Switch flame proof - weather proof rotary type with termination box in LM6, 16a, single pole one way 5 Amps 240V alongwith ISI marking complete all as specified and directed.

S &F Flame proof - weather proof switch socket combination in LM6 cable termination box in LM6, 16Amp/5Amp, 230 V alongwith ISI marking complete all as specified and directed.

S&F Flame proof - weather proof LED Tube light 2x20w 4' made of aluminium alloy LM6,complete with all accessories prewired and complete all as specified and directed.

S&F Flame proof - weather proof Exhaust Fans AC single phase 300 mm sweep with louver, Energy saving fans, 230 v, 50 HZ Completed all as specified and directed.

S&F Flame proof - weather proof sheet metal enclosure MCB distribution board single pole & netural 240V 4way with Al die cast Alloy LM6 construction of Gas Gr. IIA, IIB certified by with ISI marked all as specfied & directed. Note:- DB fixing on wall and making good surface.

S&F RCBOs for earth leakage, overload & short-circuit protection RCBO double pole 30 mA, 32 amp capacity complete all as specified and directed.

S&F MCB SP upto 40 Amps 240 volts complete all as specified and directed.

M&L Earthing complete with galvanized iron earth plate electrode 600mm x600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of MES sch pt I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete. (GI pipe & GI wire beyond 7.5 mtr will be measured and paid respectively)

Supply, Laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area16sqmm 2 core.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in soft/lose soil for taking out pipe & laying of pipe & getting out for diverting of CI pipe line complete all as directed.

M&L Bricks common burnt sub class B designation for protection of cable complete all as specified and directed.

M&L Natural local river sand for cable protection .

M &L GI tubing 40mm dia light grade with all fittings laid in trench/on wall/ on Pole including bending of suitable size/support of UG cable as required at site as directed by Engineer-in- Charge.

M/S MAGADH CONSULTANT

M/s Vinay Kumar

SUDHIR KUMAR SINGH

MS HARI MOHAN GUPTA