Construction of median for traffic improvement of main roads of Sanganer constituency in Zone-5 JDA Jaipur

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats, or black pipe with hold fast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

As Per Order No. JDA/TA to DE/07/D-1129 Dated 01/03/2007 Approved by Director (Engineering). Providing and fixing reinforced concrete pre-cast kerb stone or dand of M-20 grade 120 cm long having longitudinal 4 nos. bars of 8 mm dia HYSL and strrups 6 nos. of 6 mm dia as per IS, with in-built provision of interloacking jointing and lifting, compaction of reinforced concrete by mechnical and tabel vibrator and jointing at site with cement mortar 1:4 complete in all respect as dircted by Engineer-in-charge on 100 mm thick cement concrete of mix 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate of 20 mm thick nominal size0 including excavation of earth and dcutting of BT road, cutting of WBM road wtc. and disposal of all surplus with all lead and lift. The size of the kerb shall be (7.5 +15)/2x30 cm, shempherred in half of depth.

Providing and laying reinforced cement concrete in superstructure as per drawing and MoRTH specifications Clauses 1700, 2302 and 2304. R.C.C grade M 20. For nominal mix 1:2:4.

Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and MoRTH specifications Clauses 1009,1600 and 2302.

Plain/reinforced cement concrete in substructure complete as per drawings and MoRTH specification Clauses 1700 and 2200. For height upto 5 m. P.C.C. grade M 20. Nominal mix (1:2:4).

Suppy of Swiss Type Bollard made out of 1.25 mm thick M.S. sheet, total height 135 cm, the lower portion is made in tapered circular section having upper dia 15 cm and lower dia 20 cm with attachment of one mandatory plate 7 mm thick M fixed with the help of 7 cm long, 30mm dia crome plated M.S. tube this part is fixed on the body with another attachment of a cap 30x7 cm. whole body is processed in black stoving enamel and mandatory plate in Azure blue, with one compulsory keep left arrow with 10mm border reflective strip each of 7.5 cm on body complete in all respect.

Painting Two Coats on New Concrete Surfaces. Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered /concrete surfaces as per drawing and MoRTH Specification Clause 801.

Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and MoRTH Specification Clause 801.