SPECIAL REPAIRS TO BUILDING NO 42 STORE ROOM AND P 46 SINGLE JCOS ACCN OF 5 TTR AT BAMBOLIM UNDER GE PANAJI GOA

Amount

Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings.

Dismantling of unframed timber scantling 40 Sqm and over in section in any position as in unframed work

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling of unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc under 40 Sqm in section

Supply and Fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Supply and Fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply and Fix rolled section as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleat or other connecting plated confirming to Fe-410-W(Gde-E-250) quality-B complete all as specified

Material and Labour for Preparation of New steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Material and Labour for preparation of old steel Surfaces and applying two coats of synthetic enamel paint on surfacess of any discription, over 10cm in width or girth

Demolition of brickwork or stone/boulder masonry, built in CM including all quoins arches pillars etc all as specified and directed.

Material and Labour for Brickwork with sub- class 'B' bricks, straight or curved on plan exc 6 m mean radius,Old size brick built in Cement mortar 1:6 .

Material and Labour for 15 mm thick cement mortar 1:6 on Brick or concrete surface finished even and smooth without using extra cement all as specified and directed.

Material and Labour for two coat of oil bound distemper on 03 mm thick wall care putty on newly plastered surfaces of wall including preparation complete all as specified and directed

Material and Labour for complete removal of existing treatment and applying two coat of oil bound distemper over 03 mm thick wall care putty on old plastered surfaces of wall including preparation all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc.

Material and Labour 15mm thick plastering on fair faces of bricks or concrete surfaces finished even and smooth w/o using extra cement in CM1:4

Material and Labour for preparation of new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 3mm wall care putty over two coat of damp proof on new surface complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame ) area n exc 1.5 sqm each.

Taking down chowkat with shutter(without taking off shutter from the frame) area exc 1.5 sqm but n exc 4 sqm each

Supply and Fix 2nd Class H.W. plain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints.

Supply and Fix for Plain framed panelled shutter 35mm thick IInd class H.W rail and style with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln seasoned and chemically pressure treated.

Material and Labour 35mm thick 2nd class H.W Glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified in SSR Part I section clause 8.20(a) supplied and fitted to chowkats.

Material and Labour Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer.

Supply and Fix for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Supply and Fix Powder coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

Supply and Fix sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm each pane 4mm thick.

Supply and Fix Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed.

Supply and Fix Butt hinges, medium weight cold rolled mild steel and fixed 100mm long.

Supply and Fix Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long.

Supply and Fix Aluminium handles cast type anodised 150mm long.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of fixed 300 mm long.

Supply and Fix 300mm ordinary rat rail rod pattern spring including roller plate complete fixing mild steel spring.

Material and Labour for cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar exc. Half brick but not exc one brick for inserting holdfasts and making good in dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Supply and Fix for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if required, hooks (stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1856 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening all complete as per requirement and direction of engr-in-charge

Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thk (unreinforced) all as specified and directed.

Material and Labour PCC 1:3:6 type C-2, 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement all as specified and directed.

Material and Labour Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) 75mm thick as in sub base all as specified and directed.

Material and Labour cement concrete type B1 1:2:4 using 20mm graded stone aggregate25mm thick as in flooring etc all as specified and directed.

Dismantling of ceiling boards any thickness including cover fillets.

Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm with size of main tee 35mm x 25mm x 1.5mm and cross tee 25mm x 25mm x 1.5mm and supporting angle at the end all alonge the wall 40mm x 25mm x 2mm, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with and including 6mm thick designer non-asbestos fibre cement building boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified and directed.

Material and Labour for machine cut kota stone slab flooring 20-22mm thick over 20mm cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Supply and Fix 2nd class hard wood scantling clean sawn as in rafters, truss members etc

Material and Labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks lawns, drive ways or light traffick parking etc, of rquired strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Material and Labour For PCC type B-1, 1:2:4 using 20mm graded stone aggerates as in coping and similar work.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore.

All as per item No 46 above but 20mm bore.

All as per item No 46 above but 25mm bore.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

All as per item no 49 above but for 25mm bore.

Supply and fixing CPVC 20mm Brass Elbow (3/4 x 1/2)

Supply and fixing CPVC 20mm Brass Tee

'Supply and fixing CPVC 20mm Male Brass threaded Adaptor (MTA/ MBTA)

'Supply and fixing in CPVC 20mm Female Brass threaded Adaptor (FTA/ FBTA)

'Supply and fixing in CPVC 25mm Tank Adaptor

Supply and fixing in CPVC 25mm Ball valve

Supply and Fix wash hand basin in repair, white flat back size 550 x 400mm including 32mm brass chromium plated waste fittings, brackets, pillar tap swan neck 15mm, PVC connection 15mm size with PTMT nuts of length 450mm including cutting for and pinning in ends of brackets for erecting stand etc.including PVC waste pipe etc complete all as specified and directed

Supply & Fixing white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete.

Supply and Fix in repairs PVC valveless, syphonic action type flush tank, white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete high level, flush pipes of PVC 32 mm dia for low lewel cistern, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm etc complete all as directed.

Supply and Fix in repair Vitreous china urinals, half stall type (back or corner wall type), complete incl providing & fixing plugs, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl 60mm long brass screws, pointing around urinals back in cement incl PVC connection 600mm long, waste pipe 32 mm dia, push button tap 15mm of cast copper alloy, screwed down for iron pipe and fixed complete all as specified and directed.

Supply and Fix Brass chromium plated shower rose 125mm .

Supply and Fix PVC (SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement

Supply only integral waterproofing compound

Supply and Fix in repairs Fancy type chromium plated bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed bore of pipe 15 mm.

Supply and Fix Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair 15mm bore.

Supply and Fix in repairs stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union & fixed , of bore of pipe 20 mm.

Supply and Fix Towel rail 60 cm long brass chromium plated 20mm dia with brackets fixed to walls.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing)

Material and Labor glazed ceramic coloured designer pattern tiles 450mmx 300mmx7mm thick on vertical surface such as skirt, Dado etc set and jointed in white or colour cement including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4

Material and Labor for coloured designer pattern glazed ceramic tiles 450x300x7mm thick as on vertical surfaces of wall such as skirting, dados and riser to step set and jointed in neat cement slurry and pointed in white or coloured cement to match,including 10mm thick plaster in cement mortar 1:4.

Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg.

Factory made solid PVC moulded Door shutter, 28 to 30 mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded coloured PVC sheet on front face & 2mm plane colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core.

Demolition of reinforced cement concrete in below or above ground floor and paving n.exc 15 cm thick ( For RCC tank).

Supply and Fix rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR Pt I, capacity of tank 1000 ltr including Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends & ball brass valves 20mm dia, high pressure, with polythene float and fly nut complete.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Taking down carefully UNSV main switch and DB's including MCBs of of any size make, type and capacity and depositing at site as directed.

Taking down UNSV sub main wiring of any size make, type and capacity and depositing at site as directed.

Material and Labour Point wiring complete with PVC insulated , FRLS, unsheathed, flexible, bright anneled cable 1100 V grade conforming to IS-694 1.5 Sq mm (nominal area) mult-stranded cable with copper conductor drawn through and including heavy grade non metallic rigid PVC casing caping of suitable size (ISI marked) and accessories fixed to walls/ floors/ ceilings / roofs etc. with sunken type pressed steel/ welded MS terminal boxes factory made out of 16 gauge, MS sheet with hold fasts, 3mm thick laminated sheet top cover for mounting of fittings switches, socket outlets, regulators etc. fixed flush with wall including provision of PVC insulated FRLS, unsheathed 1100 Volts grade, 1.50 Sqmm multistranded copper earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:-

(a) One light point / Fan point ,Bell point controlled by one, one-way switch,

(b) One switch socket outlet 3 pin 5 Amps, on Same board

(c) One switch socket outlet 2/3 pin 5 Amps, on Independent board.

All as per item No 79 above but with 2.50 sqmm PVC insulated FRLS, multistranded copper conductor cable 1100 V grade and 2.5 Sqmm PVC insulated FRLS multistranded copper conductor cable 1100 V grade for one 3 pin, 5/15 Amps switch socket outlet on independent board complete all as specified and directed.

Supply and fix Switch piano, flush type, 5Amps, single pole, one way. Make: SSK Anchor/ Havell's,

Supply and fix Switch Socket combination piano, flush type, 15 Amps, singel pole, one way. Make:- SSK/Anchor/ Havell's.

Supply and fix Switch Socket combination piano, flush type, 5 Amps, singel pole, one way. Make:- SSK/Anchor/ Havell's.

Supply and fix Ceiling rose surface bakelite 65x50mm two to three terminal Make : SSK/Havells/Plaza.

Material and Labour for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and fixing Regulator step type 300 Watt 240 Volt for Ceiling Fan all as specified and directed. Make - SSK/Anchor/ Havell's

Supply and fix LED Batten Tube Light light fittings 20 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed. Make:- Bajaj Cat part No BCLSB 20 WH or equivalent in CG,Havells

Supply and fix LED Batten Tube Light light fittings 10 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed. Make:- Bajaj Cat part No BCLSB 10 WH or equivalent in CG,Havells

Supply and Fix Ceiling fan BEE labelling 5 Star Rated Voltage Single Phase, 220Volts AC .Frequency 50HZ Maximum Power Input 50 Watt Sweep 1400 mm . Standard Fittings & Accessories.Capacitor, double ball bearing, Down Rod, Canopy & other standard accessories for complete fitting of the fan. Certificate received from BEE mention input power, star rating, air delivery and 2 year guarantee certificate. To be attached by the bidder.

Supply & Fixing exhaust fan 240 V AC single phase complete with luvers and shutters 300 mm sweep including provision of flexible three core copper conductor cable of 23/0.0076 upto ceiling rose and grouting 04 Nos full threaded bolts and nuts etc all as specified and directed.

Supply and fix 20W LED street light fitting,including bracket of required sizes new generation, energy saving and environmental friendly, long life LED street light made up of pressure die-cast housing with prismatic polycarbonate modular secondary lense optic for city road lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK08. 4KV inbuild surge protection of capacity LED including all accessories complete all as specified and as directed.Havells cat NO VILUMINASL20WLED757SASYBOPC or equivalent in Make: CG/ Phillips

Supply and fix IP-42 protection distribution board, SPN 4 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed.

Supply and fix IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed.

Supply and Fixing Isolator SPN 6 to 40 Amps, 240 Volts .

Supply and Fixing MCB SP 6 to 32 Amps 240 volts, 15 Hz, 10 KA suitable for lightening load of capacity 6 to 32 Amps.

Supply and fix in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps

Material and Labour submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 4 sqmm drawn through and including heavy grade PVC casing caping of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 4.0 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified. Note: (a) Two runs of 4 Sqmm single core copper cables and One run of earth conductor cable of 4.0Sqmm with casing capping/conduit will be measured and paid as one unit length.

Material and Labour submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 6 sqmm drawn through and including heavy grade PVC casing caping of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 6.0 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified. Note: (a) Two runs of 6 Sqmm single core copper cables and One run of 6.0 Sqmm earth conductor cable with casing capping/conduit will be measured and paid as one unit length.

Material and Labour for earthing in repair complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991) all as specified and directed by Engr-in-Charge. (iii) RCC pit cover shall be precast of RCC 1:2:4, type B-1 80 mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of cast iron cover.

Supply and Laying in repair in trenches/fixed on wall/pole PVC under ground LT cable PVC insulated, armoured heavy duty electric cable with alluminium stranded conductors 1100 Volts grade confirming to IS 1554 of size 16 sqmm 4 core and all as per specifications and direction by engineer in charge.

Supply and Fixing load line DB Double door including MCCB 63 Amps including dismantelling of existing panel of wall and fixing new load line box and doing the existing connection in new load line with SP ,SPN ,TPN ( SP ,SPN ,TPN measured and paid Separately plaster with necessary bricks and Cement required at Site and matching the existing surface with Colour included in unit rate and Make Havells/C&S/Schnieder

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for removing/laying of cable etc as directed by Engineer-In-Charge.

Returning, filling excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each all as directed by Engineer-In-Charge.

Removing surplus excavated soil to a distance not exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

Supply and laying DWC HDPE pipe of outer dia of 50mm and inner dia 50mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable including bends complete all as specified and directed Make : '' Rex Polyextrusion Ltd, Finolex, Supreme, Prince, Astral'' or equivalent or equivalent as approved by GE in writing.

Supply and fix DWC HDPE coupler of dia of 50mm complete all as specified and directed. Make : '' Rex Polyextrusion Ltd, Finolex, Supreme, Prince, Astral'' or equivalent or equivalent as approved by GE in writing.

Supply and fix 40mm GI tubing light grade for protection of cable fixed in wall or laid in trenches including taking down and unserviceable tubing all as specified and directed.

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD

industrial suppliers

SHREE SHIV SHANKER ENTERPRISE

OM INFRA

N VENKATESWARLU

M/S RANJAN AND DAUGHTERS GROUP