Supply and Installation of Prefabricated Single Storey Portable Office Including Toilet at Chitra Nagar Near Amman Unavagam in Ward No 10 North Zone

Design, Fabrication, Supply, and Installation of Prefabricated Single-Storey Portable Office (L 20' x W 10' x H 9.5') with OFFICE ROOM, 4 NOS LED ELECTRICAL LIGHTS, 4 NOS 16-A PLUG POINTS, 1 NO MAIN DOOR, 2 NO WINDOWS, 2 NO FAN, PROVISION FOR AC.) Completed

Earth work excavation in all soils and Sub Soils with initial lead and lift including all Labour Charges as per the Direction of the Departmental officers etc. complete.

Flooring with bed of cement concrete 1:4:8 (One part of cement, four parts of sand and eight parts of stone jelly by volume) using of 40 mm thick granite hard broken stones, all machine mixed, laid to uniform thickness of 100mm and top left rought to receive floor finish including all labour charges for concreting, ramming, curing etc, and providing expansion joints, slopes & grades if any etc., complete complying with relevant standard specifications at all leads & lifts inside the building.

Providing of Random Rubble Masonry in Cement Morter 1:5 mix using New Stone from approved Quarry including all labour Charges Etc., Complete.

Supplying and erecting centering for sides and soffits including supports and strutting for plain surfaces such as reinforced cement concrete slabs, walls etc., complete

Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOCKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc.,

Reinforced Cement Concrete 1:1.5:3, one part of cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications at all leads inside the building.

Plastering for concrete surfaces using cement mortar 1:5(One part of cement, five parts of sand by volume) thickness 12 mm (average) for all internal/external surfaces for drains etc., finished smoothly to one level including curing etc., complete, at all leads and at all heights.

Plastering for concrete surfaces using cement mortar 1:3 mix(One part of cement, five parts of m.sand by volume) thickness 10 mm (average) for all ceiling etc., finished smoothly to one level including curing etc., complete, at all leads and at all heights.

Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts.

Fly ash Brick work in Cement mortar 1:5 mix ( One cement, Five m.Sand) using Iind class ground moulded Burnt bricks from Approved Chamber etc. complete

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Daddoing the walls with first quality approved Glazed tiles of size 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete (Colour Glazed tiles with printed design)

Supplying and Fixing of American standard EUROPEAN WATER CLOSET of size 580mm x 440mm with 'P' Trap and foot rest and Filling allround the closet using 20mm broken brick jelly including fixing in position and levelling etc., complete

Supplying and fixing in position best white glazed earthernware Oriya type INDIAN WATER CLOSET of approved quality of size 584mm with 'P' or 'S' trap and embedding the closet with trap to shape in position with 40mm brick jelly lime concrete 1:2:5ETC.

Supplying and fixing of HDPE Water Tank with suitable specials including cost of materials to site and all other labour charges.etc

Supply and fixing of single box type 4"40W flu fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube.

Supply and fixing of Bulk head fitting with bulb etc., completed.

Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed SC Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessorie in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A switch and making good of the concealed portion with suitable colour for PVC open light / fan point 9For electronic regulator) (5 points per coil)

Wiring with 2x1.5sq.mm PVC insulated unsheathed Conductor of 1100Vgrade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A 3pin non inter locking CS plug with painting of suitable colour with continous earth wire connection of 14 SWG TC wire for opening PVC plug point

Supply and fixing of RCC precast circuler rings including all Labour Charges as per the Direction of the Departmental officers etc. complete.

Supply and fixing of RCC precast circuler cover slab including all Labour Charges as per the Direction of the Departmental officers etc. complete.

Supply and Fixing of Lipped Mouth Porcelin Flat Back Urinal Tub with all accessories such as 32mm dia Bell Mouth PVC Connection , 15mm dia GM wheel Valve,15mm dia 'B' Class GI Waste Water Pipe 15mm dia nylon connection, 15mm dia Brass nipple Etc., complete (White)

Plastic emulsion paint with approved colour best quality paint as per the departmental officers two coats of emulsion paint over one primer coat including cleaning scraping removal of dust and pop putty works where as require data

Supply and fixing of RCC ornamental jolly with approved model and fixing arrangments including all labour charges as per direction of departmental officers etc,complete

Painting with enamel paint in two coats of approved colour and quality over new iron work etc. complete.

Supply and Fixing in position of Indian make White glazed earthware WASH BASIN 550mmx400mm with all accessories such as costIron brackets , 32mm dia C.P waste coupling 15mm dia G.M wheel valve ,15mm dia Nylon connection , 15mm dia Brass Nipples, 15mm C.P Pillar tap etc., complete.

Supply and Fixing of 30W LED Street light Fitting with necessary Bowl and Bracket and Bulp as per Standard Quality as per the Direction of the Departmental officers etc., complete.e.

fabricating supplying and fixing of pre Painted galvanism colour sheets with the following sheet should be G.Lbase pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws tobe | fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular. modified polyster coat. with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish - like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs. as per the site condition and as directed by the departmental officers

S/F of FRP door Shutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3mm wall thickness for styles and rails etc., of sizes specified by Engineers.

Supply and delivery of pipes and specials etc complete.,

25mm upvc pipe

110mm pvc pipe 6ksc

160mm pvc pipe 6ksc

90mm pvc pipe 6ksc

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (MSand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supply and run of 4 x6 sq.mm. PVC Insulated copper cable (7/20) run of mains for service connection. Etc. complete.

Supplying , fabricating erecting structural steel work for roofing welding or bolted type using MS Channels , angles, platesw and round bars etc., comforming to IS