REPAIR AND MAINT OF INTERNAL WIRING AT SWC SIGNAL COMMAND, SUB AREA, STN HQ, HOLIDAY HOME, MES IB, BAND MAN, PRATAP LINE I TO V NIRMAN VIHAR I TO III ECHS, CIU, CWE OFFICE, GE(S), GE CTL, E/M INSTALLATIONS AND GE PROJECT UNDER GE (SOUTH) JAIPUR

Amount

Taking down carefully surface aluminium or copper point wiring with PVC casing capping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and as directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories terminated in modular sunken boxes for mounting switches, sockets, fan regulators as required for one light point controlled by one switch complete all as specified and as directed. (Note-1. The cost of cutting chases in stone/bricks masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring.)

All as per item No. 02 here-in-before but one fan point controlled by one switch complete all as specified and as directed.

All as per item No. 02 here-in-before but one exhaust fan point controlled by one switch complete all as specified and as directed.

All as per item No. 02 here-in-before but one light point controlled by two, two way switch complete all as specified and as directed.

All as per item No. 02 here-in-before but one socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and as directed.

All as per item No. 02 here-in-before but one socket outlet 6 amp controlled by one switch on independent board complete all as specified and as directed.

All as per item No. 02 here-in-before but one bell point controlled by one bell push complete all as specified and as directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories terminated in modular sunken boxes for mounting switches, sockets, fan regulators as required for one socket point 16 Amp controlled by one switch complete all as specified and as directed. (Note-1. The cost of cutting chases in stone/bricks masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring.)

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16 mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets, fan regulators for one light point controlled by one switch complete all as specified and as directed.

All as per item No. 10 above but one light point controlled by two, two way switch complete all as specified and as directed.

All as per item No. 10 above but one fan point controlled by one switch complete all as specified and as directed.

All as per item No. 10 here-in-before but one exhaust fan point controlled by one switch complete all as specified and as directed.

All as per item No. 10 above but one socket outlet 6 Amps controlled by one switch on the same board with other switches complete all as specified and as directed.

All as per item No. 10 above but one socket outlet 6 Amps controlled by one switch on independent board complete all as specified and as directed.

All as per item No. 10 above but one bell point controlled by one bell push complete all as specified and as directed.

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 4.0 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 4.0 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets for one 16 Amps socket outlet point controlled by one switch on independent board complete all as specified and as directed.

S&F switch piano flush button single pole one way 6 Amp complete all as specified and as directed.

S&F switch piano flush button single pole one way 16 Amp complete all as specified and as directed..

S&F flush type, 6 Amp, single pole, two way complete all as specified and as directed.

S&F bell push, flush type, 6 Amps 240 volts complete all as specified and as directed.

S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type complete all as specified and as directed.

S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type complete all as specified and as directed.

S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete all as specified and as directed.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module complete all as specified and as directed.

S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts complete all as specified and as directed.

S&F modular switch 1 way 16 Amps, 230 volts, 1 module complete all as specified and as directed.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and as directed.

S&F modular fan regulator 120 watts, 2-module AC 230 Volts complete all as specified and as directed.

S&F switch modular 2 way 6 Amps, 230 volts, 1 module complete all as specified and as directed.

S&F modular bell push 6 Amps 1 module. Note: Item no. 25 to 31 all with modular whiter cover plate with frame as requaired module all as specified and directed complete all as specified and as directed.

S&F door bell AC 240 volts, single pole complete all as specified and as directed.

S & F lamp holder angle type insulated body with back plate for batten/pendant fitting including 10 watt led bulb complete all as specified and directed.

S&F ceiling rose 3 plates polycarbonate body complete all as specified and as directed.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x6Sqmm + 1x6.0 Sqmm earth wire in 20mm dia conduit complete all as specified and as directed. Note : 2 Run of 6 sqmm + 1 Run of 6 sqmm earth wire and 1 RM conduit wil be measured one unit.

M & L for Sub main wiring with 04 runs of 6 Sqmm single core FRLS PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade (ISI marked) drawn through and including of 25mm dia PVC rigid conduit medium with conduit accessories and fixed to the surface of wall/ceiling as per ISI including 02 runs of 6 Sqmm PVC insulated copper conductor earth continuity wire complete all as specified and directed. Note : 4 Run of 6 sqmm + 2 Run of 6 sqmm earth wire and 1 RM conduit wil be measured one unit.

S&F 20 amp, single pole and neutral socket outlet with 2 pole and earthy, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for socket outlet with and including one number single pole 'B' series MCB 20amp as required.

S&F in repair rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces of 25mm dia.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SP&N, 240 volts, 4 ways complete all as specified and as directed.

S&F MCB distribution board, powder coated, SP&N , 240 volts, 8 ways,CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and as directed.

S&F MCB distribution board, powder coated, SP&N , 240 volts, 12 ways,CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and as directed.

S&F MCB distribution board TP&N, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS:8623, degree of protection IP 43-IK09 with metal door, recess mounted , having insulated 100 amp tinned copper bus bar, earth bar, din bar, detachable gland plate, interconnection , earthing connection, blanking plates in unused spaces as required complete all as specified and as directed.

S&F in repair MCCB four pole, 63 Amps, 25 KA thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB for connection, required lugs as required complete all as specified and as directed.

All as per item No. 48 above but 125 Amp of 25KA complete all as specified and as directed.

S&F MCBs of 'B' series single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and as directed.

S&F MCBs of 'B' series SP&N double pole 10 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and as directed.

S&F in repair MCBs of 'B' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of TP&N Four pole 40 to 63amp complete all as specified and as directed.

S & F in repair MCB Tripple pole neutral(TPN) 63 Amps,10 KA, ISI marked, for inductive load connected through cable lugs of suitable size complete all as specified and as directed.

S&F in repair LED (1.2M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having lumen not less than 2200 complete all as specified and as directed. Make: Philips cat Part No. BN021LED25S6500PSU GR S1 or equivalent cat part in other makes as per appendix 'B'.

S&F energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens 36 Watts complete all as specified and as directed. Make: Philips cat Part No. RC240BLED33S-6500PSU ODWDHor equivalent cat part in other makes as per appendix 'B'.

S&F in repair LED fixture 10 watt having lumen output 100 lumens per watt including connection complete all as specified and as directed. Make: Philips cat Part No. BN010LED25S6500PSU GR S1 or equivalent cat part in other makes as per appendix 'B'.

Supply and fixing in replacement 8 watts wall mounted LED decorative luminary with standard accessories and lamp inclduing fixing the same with existing wall. Make: Havells cat Part No. LHJE01106499 or equivalent cat part in other makes as per appendix 'B' complete all as specified and as directed.

Supply and fix in replacement LED luminary 40 watts IP 66 5700K outdoor luminary with standard accessories and making connection with existing light point with 3 core 1.0 Sqmm PVC insulated multistranded copper conductor wire including fixing the same on existing Gi bracket complete. Make: Philips cat Part No. BRP050LED036CWR1MPPCSIPSU GR or equivalent cat part in other makes as per appendix 'B' complete all as specified and as directed.

Supply and fixing in replacement GI bracket made out of 32mm dia GI medium grade pipe of length 90 Cms long bend shape and size as per site requirement including 02 Nos of MS flat 40x5mm 200mm long bend to shape as required to fix the GI bracket with existing wall using 04 Nos of MS fastener 10mmx100mm long with nut, bolts and washers complete all as specified and as directed.

Supply and fix in replacement 10 watts LED T-lamp B-22 base (warm white/Golden Yellow) 100 lumens, AC 220 volts complete all as specified and as directed. Make: Philips cat Part No. 9290018611 or equivalent cat part in other makes as per appendix 'B'.

M&L for earthing with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with the top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate connected to earthing point and including 15mm bore light grade G.I. protection pipe (upto 7.5 mtr from edge of the pit), PCC pit in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40mm thick cover, watering arrangement with funnel and wire mesh and 20mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work including testing on completion complete all as specified and as directed. Note 1- Following items deemed to be included in quoted rate (a) Earth electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 meter (c) Material and labour for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcoal dust and common salt as per direction (e) All labour involved including testing of earth network.(f) Excavation and earth work or drilling holes for electrode (g) P.C.C pit and C.I cover (h) Funnel with watering pipe, wire mesh and copper lugs etc as specified (j) G.I protection pipe pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. Note 2. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

Taking down MCB distribution boards with incoming and outgoing controls and make any capacity after disconnecting complete all as specified and as directed.

Taking down carefully sub main wiring with PVC casing capping / PVC surface conduit and making good disturbed surfaces completed all as specified and as directed.

M&L in repair LED garden light conical shape with top cover at bottom, round shape and top cover at top with pointed bolt opal finish glass made up of polycabonate body suitable for B-22 Base (retrofit) with 9 watt LED lamp complete all as specified and directed by engineer in charge. Note:- (Cost of wiring with nearest garden light/junction box with 1.5 sqmm 3 core wire and GI pipe of suitable dia. not less than 1 mtr length with painting with two coat enamel paint will be inclusive in above quoted price.).

Supply and fix in replacement PVC fresh air fan 200/250 mm sweep with louvers, fan motor and accessories complete including making connections. Note :- Old u/s fan shall be deposited to MES E/M store as directed.

Taking down carefully ceiling fan of any sweep with frame cable sealing end and dismantling of blades,brackets etc complete. Opening & dismantling of ceiling fans any sweep cutting and taking out old burnt/damaged winding/material/bearing and painting the ceiling fan by shiny white colour of recommended quality, re-assembling including provision of PVC copper twisted conductor three core of size 1.0 Sqmm of required length and testing complete all as specified and as directed.

All as per item No. 65 here-in-before but Exhaust fan of any size. Note for itemNo 65 to 66:- Spare parts shall be measured and paid seperately under respective item schedule as supply only. (a) Repairs under serial item No. 65 & 66 here in before shall be carried out at the site of work. (b) Rewinding under srl item no 67 & 68 shall be done with winding machine at workshop. (c) Fans will be given to contractor under Gate Pass in Lots of appx 30 Fans and the same shall be returned by contracter in 10 Days time after all repairs and painting.And the panelity for not receipt of repair fan in stipulated time shall be Rs 20 per fan per day.

M&L for re-winding the u/s (burnt) motar of ceiling fan (1200/1400 mm) sweep with super enamelled copper wire of existing/same SWG including all insulating material all as required as per standard practice, varnishing the same and drying, cleaning with grease oil etc complete all as specified and as directed.

M&L for re-winding the u/s (burnt) motar of exhaust fan (300/450 mm) sweep with super enamelled copper wire of existing/same SWG including all insulating material all as required as per standard practice, varnishing the same and drying, cleaning with grease oil etc complete all as specified and as directed.

Supply and fix in repairs exhaust fan motor for (300/450) mm sweep of desired specifications (ISI Marked) to maintain current speed,air flow at load complete all as specified and as directed.

Supply only bearing of ceiling fan of make/type suitable for fan to be repaired as specified complete all as specified and as directed.

Supply only bearing of exhaust fan of make/type suitable for fan to be repaired as specified complete all as specified and as directed.

Supply only capacitor 50 Hz 2.5 MFD and connect the same in circuit and testing complete all as specified and as directed.

Supply only bushings suitable for ceiling/ exhaust fan any sweep and oiling complete all as specified and as directed.

Supply only fan canopy plastic body suitable for any type/any make/any sweep of ceiling fan complete all as specified and as directed.

Supply only ceiling fan down rod 15mm dia 45mm long suitable for any type of ceiling fan complete all as specified and as directed.

Supply only Bracket , legs and rubber bush suitable for existing exhaust fan of any size complete all as specified and as directed.

Supply only metallic blade (four/three blade set) for exhaust fan 450/350/300/250 mm complete all as specified and as directed.

Supply only metallic blade (three blade set) for 1200mm ceiling fan (good quality) complete all as specified and as directed.

supply & fixing surface modular Gang box 1/2 module with switch, socket and all other accessories complete all as specified and as directed.

supply & fixing surface modular Gang box 3 module with switch, socket and all other accessories complete all as specified and as directed.

supply & fixing surface modular Gang box 4 module with switch, socket and all other accessories complete all as specified and as directed.

supply & fixing surface modular Gang box 6 module with switch, socket and all other accessories complete all as specified and as directed.

supply & fixing surface modular Gang box 8 module with switch, socket and all other accessories complete all as specified and as directed.

Supply only PVC casing caping not less than 32x16 mm ISI marked ivory colour alongwith all fittings/fixing accessories complete all as specified and as directed.

S&F in repairs Globe shaped post top lantern in frosted finish made up of Polycarbonate, long life aesthetically designed with systematic light distribution with IP 65 with 40 Watt LED Bulb and 5700 K lumen complete all as specified and as directed. Make - Havells cat pt No- RUBYPT40WLED830PSYMTOPC or equivalent cat part in other makes as per appendix 'B'. (Note:- Cost of GI pipe of appropriate length and appropriate Dia. to fix post top lamp and cutting of wall/surface along with PCC 4:2:1 to fix GI pipe will be included in above quoted rate.)

S&F in repairs 10 W Bulk Head light environfriendly ultra modern energy saving surface mounted decorativeoval bulk head edge lit LED luminaire comprising of High brightness LED Lamp complete all as specified and as directed. Make - Havells cat pt No- RUGBYGENXFTS10WLED865SSYMBOPC or equivalent cat part in other makes as per appendix 'B'.

Supply & fix in repair LED surface downlight Square ( Economy range ) 6500K/3000 K with electronic driver LED fittings 1 x 18 W complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make - Syska cat Pt No SSK-SDS-18W-N or equivalent cat part in other makes as per appendix 'B'.

S & F in reapir Plug top 3 pin 15 Amps, 230 Volt AC, ISI marked complete.

S & F in repair Plug top for 3 pin 5 Amps, 230 Volt AC, ISI marked complete all as specified and as directed.

M/s Prakash Enterprises

M/S TRADE LINKERS