ADDN ALTN OF NEW HQ BUILDING AND PERIMETER WALL OF TEJAS ENCLAVE AT AFSSR PROVN OF DOOR AND INCREASE IN HEIGHT OF ALUMINIUM PARTITIONS AT STATION IT CELL AT AFSSR AND PROVN OF COVERED PARKING AND MISC WORK AT NTS UNDER AGE BR AF GURGAON OF GE AF GUR

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

M&L for PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed

Excavation in post holes (or similar holes) in Soft /loose soil each n exe 0.5 cu.m, gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m and making good surface complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed

Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) complete all as specified and directed. The same is deposited to MES Store.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregates) as in foundation filling and mass concrete , lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , on roofs , not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, etc including necessary formwork complete all as specified and directed by Engineer-in-Charge.

S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates all as specified.

M&L for preparation of new surface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specifed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in Charge

M&L for granite stone slab 16-18mm thick machine cut and machine polised, in skirting, Steps, Kitchen platform /dado etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall & including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-In- Charge.

Dismantling Floor, Paver Tiles, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L for Vitirified Ceramic Tiles 10mm thick (Square/Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.

Dismantling damaged/unserviceable GI Snap Grid Ceiling Frame Work with Ceiling Boards of any description, complete all as specified and as directed.

S&F GI Powder coated GI Snap Grid Frame Work of size 605x605mm as in False Ceiling with supported hanging of Mild Steel Rod of 'J' Bolt, complete all as specified and as directed.

M&L for 12 mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size,fixed with nails or with staple in ceiling/ timber frame complete all as specified.

M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly Plastered surfaces of Walls and by applying 1 mm Wall Putty, cutting/rubbing to obtained a Smooth Surface and applying Two Coats of oil bound distemper white or any tint etc complete as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and as directed.

S&F Mild steel sliding door bolts 300mm long with hasp, staple (bolt type) , stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete all as specified.

S&F Mild steel barrel tower bolts, 150mm size, stove enamelled black, with bolt complete all as specified and as directed.

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and as directed.

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and as directed.

Supply & fixing Butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

M&L for preparation of new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over including 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed.

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in sub base all as specified & directed by Engr -in charge.

S&F machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment over and including 25mm thick sand cushioning complete all as specified and as directed.

S & F stainless steel ( 304 Gde) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffring , polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etcof required size, on the top of the floor or the side of waistslab with suitable arrangement as per approval of engineer - in charge (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasterners etc.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and as directed by Engr-in-charge.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as directed by Engr-in-charge.

Returning, filling in, incl. spreading, leveling, watering & well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exc. 50 m and depositing where direct at a level not exc. 1.5 m above the starting point complete all as specified.

M&L for exterior grade coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick back coating plaster complete in CM 1:4 all as specified and as directed.

M&L for Coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for Coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick back coating plaster in CM 1:4 complete all as specified and as directed.

M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B1 (Using 20 mm graded crushed stone aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M&L for rendering 15mm thick cement concrete in 1:4 on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and as directed.

M&L for preparing newly for plastered surfaces of walls by applying 1.5 mm thick wall care putty cutting rubbing for smooth surface and applying two coat of arcylic weather coat exterior paint with approved tint over a coat of pimer (as per manufacturer instructions) ,complete all as per specified and as directed.

M&L for Brickwork in cement mortar (1:4) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in as specified and as directed.

M&L for preparing old painted/treated steel and iron surfaces of any description and applying two coats of synthetic enamel paint (First quality) including all surfaces for Y-section Mild Steel angle frame (area exc. 0.25sqm but not exc. 0.50sqmEach) fixed on perimeter wall (Straining supported to barbed wire and concertina coil), complete all as specified and as directed.

S&F of Mild steel TMT bars of 6mm to 8mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as specified and as directed.

M&L for Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. as specified and as directed.

S & F Powder coated aluminium frame for doors, windows, ventilators and fixed type partition wall with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr-in-charge.

S & F Powder coating aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Thickness or powder coating not less than 50 micron) complete all as specified and as directed by Engr-in-charge.

S & F 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, rubber beading, glazing clips and all necessary fittings complete all as specified and as directed by Engr-in-charge.

M & L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed by Engr-in-charge.

S& F Mortice lock, vertical type, size 100 mm 4 levers fixed to aluminium door shuttercomplete all as specified and as directed by Engr-in-charge.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed in position complete all as specified and as directed by Engr-in-charge. Make:- Universal /Godrej/ Amar or equivalent as approved.

S&F Door Closer Aluminium (Die Cast) Body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram and fixed-in-repairs, complete all as specified and as directed by Engr-in-charge.

M/s Pawar Builders

k k enterprises

SHAKSHI ENTERPRISES

MOHIT ENTERPRISES

M/S ujjwal associates

Chaudhary Constructions