Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.9 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹27.9 L+₹2.0 L (7.59%)Rejected-Finance 45 PIR BABA TARUSHAW ROAD HALWARA AD LUDHIANA 141106 | HALWARA | LUDHIANA | PUNJAB | 141106 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹29.2 L+₹3.3 L (12.9%)Rejected-Finance RAJKOT ROAD AIR FORCE STATION HALWARA 141106 PUNJAB | HALWARA | LUDHIANA | PUNJAB | 141106 | L3 | Rejected-Finance Other than lowest |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
14 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Halwara
GE (AF) Halwara
PROVN OF CERTAIN SANCTIONED WORKS AT AF STN BARNALA
2023_MES_615019_2
GE/HAL-34/2023-24
Open Tender
Civil Works
Item Rate
183 days
GE (AF) Halwara
MES ENLISTED CONTRACTORS AND CLASS D CATEGORY a(i) and b(i)
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Halwara
₹56,000
Yes
27 Oct 2023
22 Sept 2023
16 Oct 2023
22 Sept 2023
14 Oct 2023
29 Sept 2023
Amount
Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.
Taking down cement plaster on brick walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for brick work with sub class ‘B’ Bricks straight or curved on plan exc 6M mean radius and built in CM in 1:6 complete all as specified and directred.
M&L for brickwork with sub class 'B' Bricks, Straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed .
M&L for15mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces with WPC @ 3% by weight of cement, finished fair and even without using extra cement complete all as specified.
M&L for 15mm thick cement plastering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.
M&L for preparation of new plastered surfaces and applying two coat of distemper oil emulsion over a coat of primer and JK Birla wall care putty complete all as specified and directed.
M & L for complete removal of existing treatment and applying two coats of distemper oil emulsion over one coat of primer and Birla putty filling the surface of walls complete all as specified and directed.
M&L for preparation of new plastered suraces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for complete removal of existing treatment on wall surfaces and applying two coats of cement base paint complete all as specified and directed.
M& L for complete removal of existing treatment and applying three coat white wash on ceiling surfaces complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in plinth protections/ path/sub base etc including necessary form work whereever required complete all as specified.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed.
M&L for joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface including 10mm thick rendering in CM 1:4 complete all as specified and directed.
Providing and applying 5.3mm ESD-SPU antiskid floor coating system including surface preparation by cleaning surface from dust, dirt, muck, moisture and all foreign material and cleaned by mechanical means using mechanical scrubber/grinder, chemical treatment for cleaning oil if required followed by application of primer Cipoxy 15 P which shall be a two component, solvent free, epoxy polyamido amine system having a volumetric ratio of mixing 2:1 to yield thickness of 200 microns then providing and applying the screed layer with Cipoxy 15 S of minimum thickness 3000microns. the self levelling screed shall consist of a low viscous epoxy amine cured system and graded aggregate ( special silica). The epoxy system shall have a volumetric ratio of mixing of resin in 2:1 ratio. the aggregates shall be added in the ratio of 1:3 or 1:3:5 over that copper tape 100 microns thick and 25mm width, connected to existing earth pit having spacing 10m both directions, then conductive primer coat of Floorkote ESD to a thickness of 100 microns and then top coat of ESD-EPU antiskid Cipy Cipothane ESD 108 which shall be supplied in pre-weighed packs and ready to mix and use which will consist of resin, hardner, EPI (colour concentrate) formulated aggregate and carbon fibre + special anti skid silica sand. All these to be mixed in the pre weighed ratio, add EPI colour (colour concentrate) and formulated aggregates + special antiskid silica sand to agitate the mixture by an electrically driven motor and lay the mixture to the thickness of 2000 microns then deaerate by using spike rollers and to allow to cure for a minimum period of 48 hours before trafficking is commenced. Over top coat demarcation paint flourescent will be applied complete all as specified and directedby Engr-in-Charge.
M&L for 5mm thick cement plastering in cement mortar (1:3) as on ceiling surfaces finished even and smooth without using extra cement complete all as specified.
M&L preparing old plastered surface of wall and applying one coat of distemper oil emulsion over a coat of wall putty complete all as specified & directed by Engineer-in- charge
M & L for preparation old plastered surfaces of wall and applying one coat of cement base paint over a coats of priming plastered surfaces complete all as specified and directed.
M & L for preparation of new plastered surfaces and applying three coat of white wash on ceiling surfaces complete all as specified and directed.
M & L for preparation of old plastered surfaces and applying one coat of white wash on ceiling surfaces complete all as specified and directed.
S&F in repalcement anodised aluminium snap grid work of size 605 x 605 mm for false ceiling, hangers 6mm dia GI( upto 1200 mm length) adjusting level fixed to roof surface by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long complete all as specified
S&F 8mm mm thick calcium silicate board of silicious and calcerous material reinforced with cellulose fibre for fixing in snap grid work as per manufacturers instructionscomplete all as specified and directed.
Taking down chowkat / frames with shutter (without taking off shutter from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. Note : The rates quoted are deemed to be included for cutting hold fasts and making good the disturbed surfaces.
S&F anodised aluminium powder coating (Minimum Thickness 0.50 Micron) frame for doors, windows , ventilators, partiiton including joining cleat for fixing etc complete all as specified and directed.
S&F anodised aluminium powder coating (Minimum Thickness 0.50 Micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws including etc complete all as specified and directed.
Supplied and fixed aluminium powder coated (Minimum Thickness 0.50 Micron) sliding window two track and ventilator with top hung shutters without sash bars section weight 0.55 kg/RM, necessary jointing cleat glazing, clip, handles CP hinges, tower bolts etc packing,anodised snap beading, screws, etc complete all as specified and directed.
S&F 9mm thick prelaminated particle board with both side decorative choice lamination type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.
S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and fixed complete all as specified and directed.
S&F factory made pressed steel frames 1.25mm thick steel sheet for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including filling hollow portion of frame with PCC 1:3:6 type C-1 complete all as specified and directed.
S & F 2nd class hardwood 35mm thick factory made Plain, framed, panelled shutters, plain, framed, panelled shutters (any number of panels) with panels of 9mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
Supply and fixing 35 mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Part-I Section 8 clause 8.24(a); supplied and fixed to chowkats complete all as specified and directed. Note: Glazing and Wire cloth shall be measured and paid separately
S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 150mm size Aluminium anodised cast type handle complete all as specified and directed..
S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F small fitting of 1st class hard wood any shape not exceeding 200 cucm, as in door stopper, cleat etc. complete all as specified and directed.
M&L for prepration of new steel surfaces over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new wooden surfaces over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F mild steel screw bolts ( machine made) with hexagonal heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut exc 22.50 and dia of shank 16 mm complete all as specified and directed.
Taking down or up 15mm bore steel tubing and connections inculding cleaning for refixing or removal to store complete all as specified and directed.
All as per Sl item No 44 above but 20mm bore
S&F 15mm bore Tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc complete all as specified and directed.
All as per Sl item No 46 above but 20mm bore
S&F stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete all as spcified and directed.
S&F in replacement Health faucet (ABS body mild steel chromimum plated suitable for 15mm dia pipe with 1.2 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.
Dismantling of PVC water tanks and S&F 750 Ltrs capacity rotational moulded water storage tank (cylinderical vertical with closed top ) hoisted and fixed in position with 20mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball (Minimum weight 210 gms) complete all as specified and directed.
S&F WHB vitreous white chinaware 550x400 mm size including CI/MS brackets ,15mm dia 45cm long PVC connection. PVC waste pipe , waste coupling of suitable size/length, 15 mm dia CP pillar tap, 15mm bore CP Angle cock and all connection complete all as specified and directed.
S&F china ware coloured EWC complete set including flushing cistern with internal fitting, coloured PVC seat cover, bend including chromium plated brass jet faucet suitable for EWC with PVC Chord and brass nozzle and fixed to pipe complete all as specified and directed.
S&F in replacement syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets, 32mm flush pipe etc, complete all as specified.
S&F in replacement 15mm dia PVC connection 450mm long with two nuts and washers complete all as specified.
S&F in replacement grating around 100mm size of PTMT (minimum wt 25 gms)
S&F in replacement 15mm bore chromium plated shower rose & arm with or without swivel joints suitable for fixing to steel pipe of 15 mm bore complete all as specified and directed.
S&F in replacement 15mm bore bib tap long body, C P cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
S&F in replacement 15mm bore stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank complete all as specified and directed.
S&F in replacement 15mm bore stop valves (Concealed type) , chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank complete all as specified and directed.
S&F in replacement soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.
Excavation in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in, removing surplus soil to distamnce not exceeding 50.00 mtr and raming earth or broken rubble mixed all as specified and directed.
M&L for PCC 1:2:4 (type B-2) using 40mm graded stone aggregate as in foundation filling and mass concrete, fixing of MS posts etc finished even and smooth without using extra cement complete all as specified and directed.
S&F framed work such as grills, grating etc with ends of bars shouldered and or rievetted or forged into spikes, framed guard bars, ladders, framed ballusters, walkways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
Supply, install, testing and commissioning of grease separator suitable for underground installation. The Grease Separator should be made from polyethylene as per DIN EN 1825 for longer life. The Grease Separator should have nominal capacity not less than 930 Ltrs with Inlet/outlet socket of nominal dia of minimum 100mm with grease storage capacity of minimum 270 ltrs and sludge storage capacity of minimum 460 ltrs. Total weight of grease separator should be minimum 81 kg with overall dimension of at least 1320mm x 1595 mm (Dia X Ht). The Grease Separator should be capable of cleaning via shaft manhole cover, emptying via suction line nominal dia of minimum 65mm and nominal pressure of 10 kg with couplings for two-sided thread connection 75/75 mm for suction line, fire hose quick coupling 75 B and 2 1/2 blank cap and Counter flange with fire hose quick coupling 75 B and 2 1/2 black cap. Top cover of the Grease Separator plant should be made from concrete frame with cast iron cover having clear opening of minimum 600 mm diameter. The cover should be odour-free when closed. The weight of the cover should be 145 kg and manufactured to meet 1.50 ton load class requirement. The quoted rate shall be included for supply & installation, provide three days training for operation/function and transportation at site as per DIN EN 1825 and DIN 4040 100 suitable for underground installation). Make ACO Passavant, Model:- LipumaxPD NS4 Grease Separator plant or equivalent model in Saniflo, Kingspan Klargester, KESSEL Art No. 93004/80B complete all as specified and directed by Engr-in-Charge.
Supply, install, testing and commissioning of grease separator suitable for underground installation. The Grease Separator should be made from polyethylene as per DIN EN 1825 for longer life. The Grease Separator should have nominal capacity not less than 930 Ltrs with Inlet/outlet socket of nominal dia of minimum 100mm with grease storage capacity of minimum 270 ltrs and sludge storage capacity of minimum 460 ltrs. Total weight of grease separator should be minimum 81 kg with overall dimension of at least 1320mm x 1595 mm (Dia X Ht). The Grease Separator should be capable of cleaning via shaft manhole cover, emptying via suction line nominal dia of minimum 65mm and nominal pressure of 10 kg with couplings for two-sided thread connection 75/75 mm for suction line, fire hose quick coupling 75 B and 2 1/2 blank cap and Counter flange with fire hose quick coupling 75 B and 2 1/2 black cap. Top cover of the Grease Separator plant should be made from concrete frame with cast iron cover having clear opening of minimum 600 mm diameter. The cover should be odour-free when closed. The weight of the cover should be 145 kg and manufactured to meet 1.50 ton load class requirement. (The rate shall be included for supply & installation, provide three days training for operation/function and transportation at site) as per DIN EN 1825 and DIN 4040 100 suitable for underground installation).Make ACO Passavant, Model:- LipumaxPD NS2 Grease Separator plant or equivalent model in Saniflo, Kingspan Klargester,KESSEL Art No. 93002/80B complete all as specified and directed by Engr-in-Charge Notes for Srl Item No.66 & 67 (i) Disconnection, reconnection and cutting of existing SGSW/PVC/CI/75mm/100mm /150mm bore pipe line site clearnace shall be included in the unit quoted rates. (ii) Installation of the grease traps shall be under close supervision of manufactures represntative , unit quoted rate shall included in the cost (iii) Sucking out grease impurities at the interval of 30 days and the maintenance of the grease traps required as per manufactures instruction shall be carried out by the contractor till the expiry defect liability period. (iv) The defect liability period of said item shall be 3 years from the certified date of completion of entire work covered under the contract (v) In addition to the performance guarantee as specified in special condition contractor shall submitted FDR against guaranty/maint of grease traps for an amount equal to 5% of quoted amount against above said item failing which the amount shall be kept reserve from the due payable to the contractor. The FDR/reserved money will be released satisfactory completion of defect liability period of these otems. (vi) Earth work and PCC shall be measured and paid for separately against respective item of this sch. (vii) Training for maint and operation of the grease traps shall be given by the manufactures representive to the kitchen cooking/cleaning staff and the cost thereof shall be included in unit quoted rate. (vii) Contractor shall deposit purchase voucher and all test certificate before calming the payment.
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation, etc. or for shaft wells manholes etc n exc 10 sqm on plan and n exc 1.5 mtr in depth and getting out in soft/ loose soil, all as directed
All as per Sl item No 69 above but depth exceeding 1.50m but not exceeding 3.00m
M&L for plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in foundation etc finished even and smooth without using extra cement complete all as specified and directed.
Removing excavated material (Soil) exc. 250m but n. exc. 500m and depositing where directed complete all as specified and directed.
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm complete all as specified and directed.
M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to 150mm bore drain pipes including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
S&F reinforced cement concrete pipe 150 mm bore, class NP-3 laid in trenches and jointed complete all as specified and directed.
M&L for brick work straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:4) using old size sub class ‘B’ bricks complete all as specified and as directed.
M&L for PCC 1 : 2 :4 Type B1 ( 20 mm graded aggregate) as in PCC drain and coping complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement bconcrete using extra cemnt including forms moulds , mitred/ stoped ends complete all as specified.
Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto complete all as specified.
M&L for precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in cover slabs (for manholes etc.) set in cement mortar (1:4) complete all as specified and as directed. Note - Reinforcement bars shall be measured and paid seperately.
S&F mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for mild steel work as in grills, gratings etc. such as frame work of wall guard bar, angle iron in door frames, barred iron door,grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work and similar work etc; confirming to Fe-290 Gde E-165 including cutting and welding as required complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with suitable size of mild steel clamp and screw including making good mouth of rain water pipe in cement mortar (1:3) or PCC (1:2:4) type B-0 using graded stone aggregate complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe complete all as specified and directed.
S&F 45 Degree bends for 75mm dia PVC (SWR) pipe, any radius, fixed with solvent cement in any position as per site requirement complete all as specified and directed.
M&L for sand filling under floors or foundation including watering and ramming complete all as specified and directed.
M&L for 80mm thick machine pressed precast concrete interlocking paver block M-40 grade of any shape and size confirming to IS 15658-2006 with grey cement and no pigment complete all as specified and directed.
M&L for cutting into existing man holes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ Section) in cement concrete 1:2:4 type B-I smooth finished and reforming benching as required for internal dia of pipe 150mm complete all as specified and directed.
Demolition of cement conrcete of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 (Nominal mix ) as in foundation, including rafts, foundation beams plinth beams: bases for columns, platform etc; basement slabs under reamed piles and mass concrete complete all as specified and directed.
Form work to sides of concrete foundations, footings, base of columns sides and soffits of foundation and plinth beams complete all as specified and directed.
M&L for PCC 1:2:4, type B-1, (20mm graded aggreagte ) as in roof kerbs bed blocks of hold fast and similar work etc complete all as specified and directed.
S&F bands, straps support or stays for rainwater, vetilating pipes, including bolts, if required hooks(stay) heavy, or large gates,.hook and pintal hinges , clamps, hold fast, wall ties, hooks for hanging and similar works and hanging of anteana wires etc complete all as specified and directed.
S& F rolled section steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) within 20mm of the length indicated complete all as specified and directed.
S&F MS plates (plain or chequered ), channels, square cut or notched (ordinary of counter sunk ) forming holes , without any attachment Fe-410grade E-250 ) complete all as specified and directed.
S&F expanded metal cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members; Weight per square metre exc 4.00 KG/Sqm complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position all as specified.
Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.
Separating, scrapping and cleaning of reinforcement complete all as specified and directed by Engr-in-Charge.
Removing of demolition material distance exc 500 M but not exc 1.50 KM and depositing where directed by EIC complete all as specified and directed.
Supply, Installing, commissioning and testing complete, high wall split units of 2 Ton capacity with cooling and heating function alongwith suitable mounting arrangement both indoor and out door unit including connection of refrigerant tube, insulation of refrigerant tube with suitable material as specified, drain out pipe with extension by PVC pipe as required length including making good disturbed surface of wall for indoor/out door complete with cordless remote control complete all as specified and as directed.
S&F 5.00 KVA capacity Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type& designed for input variation between 130 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and directed.
M&L for Sub main wiring with two runs of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable, fire retardant low smoke drawn through and including ERW steel conduit 25 mm dia (external) flame proof, heavy grade (IS Marked) including necessary all accessories / fixtures concealed in wall, ceiling including sunken type pressed steel terminal boxes with flame retardant sheet of approved shade and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable fire retardant low smoke as earth wire conductor, fixed on wall/ceiling complete all as specified and as directed.
S&F Industrial socket metal clad plug and socket with suitable MCBs single pole 25 Amp for Airconditioners complete all as specified and as directed.
M&L for sub-main wiring with two single core cables PVC insulated and un-sheathed 4X6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in concealed PVC conduict 32mm dia including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge.
S&F triple pole and neutral & earth, sheet metal enlclosure with a three pin and earth plug with socket complete with one triple pole 20 Amp MCB , 415 V complete all as specified and directed.
S&F 10 KVA capacity Servo Controlled Voltage stabilizer for automatic operation, three phase naturally oil cooled indoor type & designed for input variation between 340 V to 460 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second complete all as specified and as directed.
S & F sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted VTP & N 4 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCCB and isolators etc including fixing in Wall with Cement mortar complete all as specified and directed by Engineer - in - Charge.
S&F MCCB TPN 63 Amps with breaking capcity 25kA , Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.
Supply, installation, testing and commissioning maintenance free tripod chemical earthing system consisting of 3 Nos of solid copper bonded earth rod of 17.2mm dia and 3 mtr long on outer surface having 250microns (minimum thickness) with exothermically welded joint of copper bus bar 150x50x5mm for long lasting and connecting each copper rod and the exothermically welded joint bus bar, both CPRI tested on at least 25KA fault current ensuring high current capacity of the system and earth rod should be certified by the Laboratories confirming to comply with UL 467- International standards grounding and bonding equipment and earth rod should be used with minimum 50 Kg earth enhancing compound that should be ROHS tested and have passed leaching sulphur, corrison, restivity test shall be less than 0.05 LHM mtr and international standard for earth enhancement compound by NABL accredited laboratory and each rod should be interconnected with 25x3mm copper strip, top of the bore finished with 40mm thick PCC in 1:2:4 type B-1, 75mm thick PCC 1:4:8, type D-2 and backfill/JAM compound shall be covered with advance polymer pit cover of 30x30cm size complete all as specified and directed. Note : 1. Cost of the items includes the scope of earth work, charcoal, salt, PCC, RCC, checmical compound and Pit cover of required size. 2. Testing of earth value shall be arranged by the contractor without any extra cost. 3. Value obtained of earh shall be below 1.00 ohm.
S&F Test point terminal block made of gun metal or phosphourus bronze 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hex head screw all as specified and directed by Engr-in-Charge.
M&L for earth continuity conductor or main earthing lead or lighthing conductor, 32mmx6mm Copper strip, fixed to wall on batten with saddles and fixing screws or PVC/Porcelain insulators etc or recessed or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing or roof conductors & down conductors etc as required including welding on both sides (over lapping) at all joints except test point complete all as specified and directed.
S&F uPVC panel trunking interlocking lid chanel for routing of signal/power cables having size 45X45 FRLS quick snap on/off type complete all as specified and directed.
M&L for Dry river washed Sand filling in cable trenches for protection of cables with two layers below and above cable and punned down to speicified thickness complete all as specified and as directed. Note: Punned down thickness shall only be measured for payment.
M&L for well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping of poles, concrete base work, protection of cable and mass concrete etc complete all as specified and directed.
Supply, laying and testing 50 Sqmm 3.50 core cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade,confirming to IS7098(Part1)1988 with stranded aluminium conductor complete all as specified and directed.
All as per Sl item No 117 above but 10 Sqmm 2 core
Supply and fix steel tubular swaged poles type 410 SP-55 (11.0 meter long) complete with CI base plate , two coats of synthetic enamel paint over a coat of zinc oxide primer complete all as specified and as directed.
S&F SMC based outdoor type Junction box pole Hinged (L) mounted having four Nos aluminium bus bar 100 amps for cable connection and looping including MCB SP 10 Amps, C Curve, 10 kA, fixed to Pole/ wall with necessary clamps, nuts, bolts, etc complete all as specified and as directed.
Supply and fix LED Floodlight luminaireon on 11 mtr swaged pole of capacity 400 Watt with secondary optics lence,made in pressure die cast housing and heat sink in aluminium extrusion with IP66 protection complete all as specified and directed.
Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.
Supply and fixing or passing through pipe, PVC insulated and FR PVC Round Sheathed, Copper Conductor 1100 volts grade heavy duty cable 3.0 core 1.5 sqmm nominal cross section in connections from junction box to Light fitting complete all as specified and as directed.
Supply and laying GI tubing light grade of 40 mm bore along with necessary bends, couples, etc for cable protection complete all as specified and as directed.
M&L for Plain Cement concrete 1:3:6 type C-2 (using 40 mm graded aggregate) in foundations, filling and mass concrete for Poles complete all as specified and as directed.
Dismantling of roof conductor aluminium /GI of sizes broken rusted at places and removing from buildings or roof/wall etc complete all as specified and directed.
S&F 32x6mm GI earth strip as ring conductor in trenches/on walls upto test points including jointing connecting etc complete all as specifed and directed.
S&F Tripole and neutral encloser with tripole and earth encloser complete with three pole and neutral/ MCB of 63 amps and all as per the specifications and direction of Engineer in charge.
Material and labour for submain wiring with 4 runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 10 sqmm drawn through and including heavy grade rigid PVC conduit of suitable size,on /floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one runs of 10.0 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified. Note: (a) Four runs of 10 Sqmm and One run of earth conductor cable with conduit will be measured and paid as one unit length.
CHOUDHARY ENTERPRISES
M/S SANGA SINGH AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .