Loading
Loading…
Loading…
Tender Value
₹67.8 L
EMD Value
₹1.4 L
Closing Date
7 Sept 2026, 5:00 pm
Executive Engineer PHED Division Malpura
Executive Engineer PHED Division Malpura
Replacement Of Damaged Pipeline in RWSS Todaraisingh PART- 3 Bhanwta To Panwaliya Due To Construction Of road by PWD (MDR 308) From Todaraisingh SH116 to Sanwariya Via Railway Station, khedulya, Bhanwata Pathraj kalan, Panwaliya , Mandolai in sub Div
2026_PHCJA_591600_1
EE PHED DIV MALPURA 98/2026-27
Open Tender
Civil Works - Water Works
Percentage
60 days
Executive Engineer PHED Division Malpura
As Per Tender Document
3 documents required · 3 mandatory
₹5,000
Executive Engineer PHED Division Malpura
₹1.4 L
Yes
21 Aug 2026
21 Aug 2026
8 Sept 2026
21 Aug 2026
7 Sept 2026
21 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
All kinds of soil
Rate is exclusive of GST. | 2,347 | Cum | 169.49 | ₹3,97,793.03 |
| 2Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply of pipe shall be in straight length in 6/12 M. Rates are exclusive of GST. HDPE PE-80 PN-6 | |||||
| 2.1 | 125 mm dia | 350 | RMT | 562.71 | ₹1,96,948.5 |
| 2.2 | 140 mm dia | 180 | RMT | 700.85 | ₹1,26,153 |
| 2.3 | 160 mm dia | 140 | RMT | 882.2 | ₹1,23,508 |
| 3Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method , including transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M. Rates are exclusive of GST. HDPE PE-80 PN-6 | |||||
| 3.1 | 75 mm dia | 340 | RMT | 183.9 | ₹62,526 |
| 3.2 | 90 mm dia | 1,050 | RMT | 259.32 | ₹2,72,286 |
| 4Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note 1 : Rates are exclusive of tail piece/ dismantling joints and earth work. Note 2 : Rates are exclusive of GST. Manually Operated CI Sluice valve of Class PN-1.0 | |||||
| 4.1 | 80 mm HW | 1 | Each | 5,339.83 | ₹5,339.83 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.54 MB
Tendernotice_2.pdf
PDF • 1.83 MB
BOQ_1050482.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].