TP1-34/2025-26 OF CE/TP-I/CNI

Amount

Soil investigation & Design using STAAD software based on the foundation recommendation as per soil test report and as per the requirement, including, preparation of Drawings for all the components of the proposed construction and submission of drawings 6 copies+2 soft copies of AutoCAD drawing, after getting approval from the competent authority, including cost of all materials, labour, leads, lifts T&P etc complete

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loom and ordinary soil including excavated earth. In Hard stiff clay, stiff black cotton, hard red earth,, shales, murram, stoney earth and earth mixed with small size boulders SS 20

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loom and ordinary soil including excavated earth. Soft disintegrated rock not requirng blasting

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loom and ordinary soil including excavated earth. In Medium rock and dense medium rock not requiring blasting

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loom and ordinary soil including excavated earth. Removal of hard rock by wedging and chiselling and trimming to proper shape

Supplying and filling in foundation and basement with filling sand in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification

Transporting the surplus excavated earth, debris etc away from the site to a lead of 5km including cost of all lead, lift, conveyance , loading, unloading etc. complete

Re filling in foundation with excavated earth in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification

Providing Anti-termite treatment in four stages i) Immediately after ewe and before laying of foundation concrete ii) before refilling sides of foundation iii) Before laying of flooring concrete and iv) outside of basement upto 1m alround the building with approved anti-termite chemicals as specified by the manufacturer including cost of all materials, lead etc. complete.

Laying PCC 1:3:6 mix using 20mm HBG machine crushed metal for foundation matt concrete including cost of all labour, materials, lead, lift, curing etc. Complete.

R:C:C 1:1.5:3 using 12 to 20mm metal without form work including cost of all materials,curing, labour, lead, lift etc. complete. as per standard specification as directed by the dept. Engineer at site.

PCC 1:2:4 mix using 20mm downgraded HBG machine crushed metal for foundation concrete without form work, including cost of all labour, materials, lead, lift, curing etc. complete as per standard specification.

PCC 1:2:4 mix using 20mm downgraded HBG machine crushed metal for foundation concrete including form work, cost of all labour, materials, lead, lift, curing etc. complete as per standard specification.

R:C:C 1:1.5:3 using 12 to 20mm HBG metal with form work including cost of all materials, curing, labour, lead, lift etc. complete. as per standard specification as directed by the dept. Engineer at site.

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. (up to basement level) Grade beam

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. (up to basement level) Plinth beam

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. (up to basement level) Column up to basement

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. (up to basement level) RCC wall

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 360 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Column

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 360 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Cast in situ cover slab

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 360 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Precast slab

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 360 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Roof Beams in Stilt Floor

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 360 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Roof slab

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 360 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Lintel in SF

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 360 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Sun shade and loft

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire etc.complete.

Brick work in CM 1:5 using all ll Class Ground Moulded Chamber Burnt bricks for Basement including the cost of all materilas , lead, lift, labour, Centering Charges T&P etc., complete as directed by the Engineers at site. Foundation & basement

Brick work in CM 1:4 (one cement & three sand) for partition wall 115mm thick, using all ll Class Ground Moulded Chamber Burnt bricks including finishing ,curing etc.complete complying with standard specification G Floor

Brick work in CM 1:6 (one cement & Six sand) using using all ll Class Ground Moulded Chamber Burnt bricks including finishing, curing etc. complete complying with standard specification - Super structure G floor

Providing cornice and architectural elevation with Brick work in C.M.1:4 using Fly Ash brick of size 9" * 4 1/2" *3 " and cement mortar bands as per drawing and as directed by the Engineer at site, at all levels including cost of all materials, labour etc. complete.

Providing grooves of 25mm in the plastering for architectural elevation works

Supplying and laying in Hume pipe 300mm dia inbet. Cable duct crossing portion including cost of all materials, labour etc complete

Plastering in cm 1:3 mix 12mm thick for bottom of roof slab, bottom and sides of sunshade partition walls etc. including cost of all materials, lead, lift, watering, curing etc complete

Plastering with cm 1:5 mix using 20mm thick for outside walls including cost of all materials,labour,lead, lift etc complete

Plastering with cm 1:3 mix using 20mm thick with water proofing chemical for car park, plinth protection, water tank etc including cost of all materials, labour, lead, lift etc complete

Providing horizantal / vertical decorative mortar bands in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials, scaffolding, lead, lift etc.complete. - 150mm width

Providing horizantal / vertical decorative mortar bands in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials, scaffolding, lead, lift etc.complete. - 100mm width

Providing horizantal / vertical decorative mortar bands in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials, scaffolding, lead, lift etc.complete. - 75mm width

Supplying and fixing MS grill gates, MS grills, name board, hand rail, ladder etc. at various levels as per approved drawing using channel, square rods, ornamental grill parts and flats including fixing in position with suitable hold-fast locking arrangements etc. complete as per standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Engineer-In-Charge before use on work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Fixed & Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The ventilators have provisions for fixing exhaust fan of suitable size. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Engineer-In-Charge before use on work.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supplying and fixing in position of hydraulic door closer heavy duty using Aluminium Extruded section body tubular type universal with ISI mark double speed adjustment like Hardwin, Gazal or equivalent quality including cost of all material, lead, labour etc. complete.

Supplying and fixing in position of Sun control film in glazed windows of approved quality and brand including cost of all materials, lead, labour etc.complete.

Paving the control room floor with rectified vitrified core endura grey coated floor tiles (Industrial type floor of johnson endura make , quality, colour and shade as directed by the engineer at site) of size 600 mm x 600mmx12mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement mortar neatly finished as per standard specification.

Paving the floor with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 6 mm in battery room over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with glazed tiles of best approved quality of make Johnson, Nitco, Euro of size 300x200 mm over cm 1:2, 12mm thick including cost of all materials, labour, lead, lift etc., complete (Dadooing with printed design colour glazed tiles of size 300mm x 200mm x 6mm)

Flooring with approved spartec ceramic non-slippery tiles 300x300mm size of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/M2, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete

Finishing the top of floor with Granolithic Finish with CC 1: 2: 3 (one cement Two sand & three HBS jelly) 50 mm thick using chips of grade 10 mm and below and rubbed smoothly

Providing weathering course with one course of weather proof cooling white tiles of size 23x23x2cm/30x30x2cm embedded in cm 1:3 12mm with mortar mixed with water proof liquid 1 lit. per bag of cement with proper slope to drain rain water and using 3mm spacer and pointing with Polymer Modified Cementations Tile Joint Grout inclusive cost of all materials, transport, curing, etc., complete as per standard specification including cost of all materials ,labour, lead ,lift etc complete.

Supplying and erection of 2.0HP Texmo/ Kirloskar/ Sharp/ Suguna make jet pump with all accessories, suitable L&T/ Siemens starter, L&T main switch, fuse, foot valve, etc. including cost of all materials as directed by the Engineer at site, commissioning etc. complete. for Borewell.

Supplying and erection of 3.0 HP Texmo/ Kirloskar / Sharp/ Suguna make Monoblock pump with all accessories, suitable L&T/ Siemens starter, L&T main switch, fuse, foot valve, etc. including cost of all materials as directed by the Engineer at site, commissioning etc. complete. (For Sump water)

Supplying and fixing of wash basin of size 550*400mm with all accessories of approved quality Parryware / Hindware including cost of wash basin with 15mm CP Pillar cock fixing using rag bolt and nut 15mm dia nylon connection hose and outlet using 32mm dia pipe waste coupling waste pipe water pipe for outlet including 15mm control wheel valve, 15mm dia brass nipple etc. complete as per standard specification.

Supply and fixing in position of Indian make white/ Colour glazed earthen ware lipped mouth flat back urinal basin of best approved quality of size 450mm with GI pipe connection to suitable length ,32mm bell mouthed PVC connection ,20mm dia GM wheel valve fixing the urinal to the wall including cost of all material,labour etc.complete.

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges and good quality CP Health faucets including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing white marble stone of size 600*1200mm, 20mm thick for partition to urinals including cost of all materials , lead lift,etc complete.

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position RCC Pre-fabricated Manhole covers 450X450 of best approved quality and as per standard specification etc. complete

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position CP bib cock of size 15mm dia with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP bib cock should be got approved by the Executive Engineer before use on works).

Providing and fixing testing and commissioning of PVC pipe for internal soil, waste & vent to IS:13592 of SWR quality, 4kg /sq.cm, including all fittings like tees, elbows, bends, collars, coupling, etc jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. Dia 4"

Providing and fixing testing and commissioning of PVC pipe for internal soil, waste & vent to IS:13592 of SWR quality, 4kg /sq.cm, including all fittings like tees, elbows, bends, collars, coupling, etc jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. Dia 3"

Providing and fixing testing and commissioning of PVC pipe for internal soil, waste & vent to IS:13592 of SWR quality, 4kg /sq.cm, including all fittings like tees, elbows, bends, collars, coupling, etc jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. Dia 1-1/2"

Providing ,fixing, testing and commissioning of PVC soil, waste, vent and rain water pipe confirming to IS 13592 of SWR quality pressure rates as mentioned below, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines laid vertically in shafts. Dia 6" (6kg/sq.cm)

Providing ,fixing, testing and commissioning of PVC soil, waste, vent and rain water pipe confirming to IS 13592 of SWR quality pressure rates as mentioned below, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines laid vertically in shafts. Dia 4" (4kg/sq.cm)

Providing ,fixing, testing and commissioning of PVC soil, waste, vent and rain water pipe confirming to IS 13592 of SWR quality pressure rates as mentioned below, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines laid vertically in shafts. Dia 3" (4kg/sq.cm)

Providing & fixing of UPVC pipe with fittngs like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, foundations and RCC slabs, making good the walls and bores in CM 1:3 as applicable clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors. UPVC pipe 40mm dia

Providing & fixing of UPVC pipe with fittngs like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, foundations and RCC slabs, making good the walls and bores in CM 1:3 as applicable clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors. UPVC pipe 32mm dia

Providing & fixing of UPVC pipe with fittngs like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, foundations and RCC slabs, making good the walls and bores in CM 1:3 as applicable clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors. UPVC pipe 25mm dia

Providing & fixing of UPVC pipe with fittngs like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, foundations and RCC slabs, making good the walls and bores in CM 1:3 as applicable clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors. UPVC pipe 20mm dia

HDPE pipe 32mm dia 10 Kg/Sq.cm for Borewell

HDPE pipe 25mm dia 10 Kg/Sq.cm for Borewell

Levelling the ups and downs of the location by engaging JCB for marking of foundations, etc., with all hire charges etc complete.

PVC Pipe 140mm dia. 6kg/ sq.cm for bore well

PVC Pipe 140mm dia. 6kg/ sq.cm for bore well strainer pipe with slotted holes

Drilling borewell in all kinds of soil 150 mm dia using rotary drilling power driven/ hand driven equipments including hire charges for equipment, bentonite solution, labour etc. complete

Supplying and filling with pebbles for annular space between strainer pipe and earth surface including cost of all materials, lead, lift etc. complete.

Flushing the borewell with power rotary flushing equipement including mobilisation and demobilisation etc. complete.

Supply and erection of RCC pre cast well rings of dia 1200mm, 300mm height and 50mm thick for construction of Rainwater Harvesting tank, Septic tank and Soak pit including cost of well rings, brick jelly, stone jelly 40, 20, 12, 10 mm and sand, etc., lead, lift, erection charges, labours etc., complete, as per direction and specification. Supply and erection of well rings 1200mm dia for Rain water harvesting, Septic tank and Soak pit.

Supply and fixing of top cover suitable for 1200 mm dia well ring

Supply and fixing For Exhaust fan rings 450mm dia

Supplying and fixing of SINTEX pvc water tank of 1000 litres capasity with necessary specials and fittings including cost of all materials , lead lift etc complete

Painting 2 coats with approved Plastic Emulsion paint over one priming coat of plastic emulsion paint over cement plastered wall surface, ceiling and other new surface and including cleaning ,preparing the surface and curing etc.complete.

Colour washing 2 coats with approved Emulsion paint over one priming coat over cement plastered wall surface applying wall putty, cleaning with sand paper , including cleaning ,preparing the surface cost of all labours to work at all levels, all materials, Scaffolding etc.complete.

Painting new iron works with two coats synthetic enamel paint over one coat of primer including cost of all materials, lead, lift, etc complete.

Dismantling PCC met with below ground level during execution including labour, tools etc. complete.

Dismantling RCC met with below ground level during execution including labour, tools etc. complete.

Dismantling brick/ stone masonry in cement mortar met with below ground level during execution including labour, tools etc. complete.

Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Supplying and fixing MS angle, channel,, MS rail, MS chequered plate, etc wherever required as directed by the Engineer as per standard specifcation - MS Channel & angle

Supplying and fixing of MS Chequred plate wherever required as directed by the Engineer as per standard specifcation

Filling with good quality gravel including cost of material, labour all lead and lift etc . Complete.

Providing quarry dust mixed with 3mm chips, BG metal 6mm and gravel mixed in 1:1:1 ratio in 15cm layer at optimum moisture content consolidated with power roller for each layer including cost of all materials labour, Lead, Lift etc., complete as directed

Filling with quarry rubbish and Quarry dust 25 % for approach road including cost of all materials labour. Lead, lift etc., complete and as directed by dept.Engr.at site.

Supplying and spreading of R.R soling stones to a thickness of 150mm with 25% of 40mm IRC HBG stones and 20% of gravel for bindage including cost of all materials, well watering and consolidation with power roller, labour, lead, lift, etc. complete

Forming berms on either sides of the road to a width of 0.60m to an average thickness 22.5 cm well consolidation by Power roller including packing and bringing the surface to camber etc.complete.

Supply and fixing 1 no 4 way Three phase and natural distribution board with insulator and 1 No.MCB of 6 amps each of standard company as approved by the engineer including cost of all materials, lead, lift, etc., complete.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make).

Supplying and fixing of MCB four pole and nuetral link 35 to 63A capacity fitted with suitable flush board and 4 no. 16A/32 distribution MCB and provision for future including cost of all materials,labour, lead,lift, etc., complete

Supplying and fixing of panel board of good quality of size 0.90 x 0.60m including fixing 3 Nos. 32 Amps fuse carrier and 3 nos phase bulb with 3 nos batten holder and 3 nos 5 amps switch and 3 nos 52 amps fuse unit for arial fuse and in and out wiring in the panel and panal board to meter with 7 / 20 CTS wire and GI pipe of earthing as per TNEB standard specification including cost of materials, labour, lead, lifts, etc, complete.

Supply & run of 3 1/2 core 70 M2m. PVC Armoured UG Cable with all accessories from Main EB pillar box to EB meter.

Supply and laying of 4 x 6 M2m PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supplying and providing wiring with 2 runs of 4 M2m PVC insulated copper wire alongwith 1.5 M2m PVC insulatd copper wire for earthing inside the PVC rigid conduit not less than 25mm width and 2mm thickness for running circuit main from DB to all Switch Boxes, motors and inverter. Neutral should not be looped.Neutral in back and earthing in green to be followed.

Wiring with 2x1.50 M2m PVC unsheathed copper multistand cable of 650v grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with contineous earthwire connection of 14 swg tc wire for light points

Wiring with 2x1.50 M2m PVC unsheathed copper multistand cable of 1100v grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with contineous earthwire connection of 14 swg tc wire for Fan points

Wiring with 2 x 1.5 sq mm ( 22/0.30) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with metal box 300 x 150 x 75 mm with 3 mm thick Hylem sheet and 5A FT switch and mounted on the wall surface for computer point (SD 27)

Supplying of switch board and wiring 2 runs of 4M2m PVC insulated copper wire and for earthing and connection with 15Amps switch and socket combined with 15 Amps plug and MS switch box size 6"x4"x3" for Battery point . This includes cost of materials and labour charges.

Supplying and providing wiring to motor room points from motor to starter switch boxes using 2 runs of 4M2m pvc insulated copper wire along with 1.5 M2m PVC casing/ PVC pipe not lessthan 25mm width with 2mm wall thickness including cost of materials , labour charges , switch board of size 18"x12"x3" with 16Amps doublepole mainswitch and providing sufficient pace for providing and connections.

Supplying and fixing box type 4'-40w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with T.W. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings

Supply and fixing of 1400 mm sweep (56") AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod including fan clamp with side plates and cross arm of size 450 mm.

Supplying and fixing of 5 amps 3 pin socket in the exisitng switch including 3 pin top.

Supply and fixing of 5A / 15 A 3 Pin combined flush type wall socket with 15A flush type switch concealed in suitable MS Box in flush with wall and covered with 3 mm thick hylem sheet

Supply and fixing of 450 mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry .

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supplying and fixing of water tight Bulk head fitting with guard and approved suitable make for incondescent lamp with guard and 100 w bulb.

Supplying and fixing musical quartz type Wall Clock of size 30 x30 cm of approved quality and colour including transport, fixing charges etc complete.

Supplying and fixing of 40mm dia. GI B class pipe for road crossing including cost of materials ,labour lead,lift etc

Supplying and fixing,testing & comissioning of Surface Mounted LED fittings for 100W LED with necessary connections etc.,of suitable for control room

Supplying and fixing, testing & commissioning of Mirror optical surface mounted light fitting with 2x2 36W LED Luminaire lamp and necessary fixing accessories of standard make and connections.

Supplying and fixing,testing & comissioning of 4W emergency light with rechargeable dry cell, necessary stand etc., by making connections through plug,

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification.

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer S Type chair (Local rate)

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer Three drawer steel table

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer Steel side rack open type 4 shelf

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer Steel half bench

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer Revolving Chair

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer Operator Table 6'x5'

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer PVC armed Chair of reputed make

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer Plastic bucket wit Jug (20 Ltr capacity)

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer Plastic bucket wit Jug (10 Ltr capacity)

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer First Aid box set

Supplying and fixing black granite stone Engraved Design detail and fixing in wall at entrance, Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of all mater

Fabriaction, galvanising and supply of foundation bolt and nuts with 2 nos.washer in High Tensile Steel including 10 cm L at bottom and 15 cm threading with 2 nuts and washers at top including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site

Providing Grout holes for equipment structures including cost of all materials, form work , labour, lead, lift etc. complete.

Fabrication of Template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site

CGST in % (For Bidders inside TamilNadu)

SGST in % (For Bidders inside TamilNadu)

IGST in % (For Bidders outside TamilNadu)

THE INDIA POWER FUTURE (BID ID -1394441)

V.JOTHIKUMARAVEL (BID ID -1394429)