Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹25.8 LAccepted-AOC 59 100 AJIT NAGAR GATE KHERIA AGRA 282008 | AGRA | AGRA | UTTAR PRADESH | 282008 | 1 | Accepted-AOC Being L-1 | |
| 2 | 2₹28.5 L+₹2.5 L (9.55%)Rejected-Finance | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹30.1 L+₹4.1 L (15.7%)Rejected-Finance H O 325 JAIPUR HOUSE AGRA 282010 | AGRA | UTTAR PRADESH | 282010 | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹46.2 L+₹20.2 L (77.6%)Rejected-Finance FLAT NO 404 BLOCK II NIRMAL HEIGHT SECTOR 12A OLD MATHURA ROAD AGRA 282007 UP | AGRA | AGRA | UTTAR PRADESH | 282007 | 4 | Rejected-Finance Being other than L-1 |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
14 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Adm Area Agra 282008
GE (AF) Adm Area Agra 282008
IMPROVEMENT TO SHIVDEV HALL AND OTHER SANCTIONED WORKS UNDER GE (AF) ADM AREA AT AF STATION AGRA
2023_MES_616416_2
8000-2081/E8
Open Tender
Civil Works
Item Rate
180 days
AF Station Agra
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE AF Adm Area Agra
₹56,000
Yes
27 Oct 2023
19 Sept 2023
16 Oct 2023
19 Sept 2023
14 Oct 2023
27 Sept 2023
Amount
M&L for cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required; depth of cutting exceeding half brick but not exceeding one brick complete all as specified and directed.
S&F Structural steel framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed.
M&L for 2nd class hard wood Kiln seasoned and chemically pressure treated glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed.
S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long ISI marked and fixed complete all as specified and directed.
S&F alumunium handle, cast type, anodised 150 mm long ISI marked complete all as specified and directed.
S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.
M&L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in copings, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
S&F 300 mm, mild steel rat tail rod pattern spring including roller and roller plate of flat iron 40 x 3 mm, 75 mm long fixed to stone/ concrete/ wooden/ metal chowkhat with screws or welding complete all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300 x 200 x 6-7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 on brick wall finished rough to fix tiles complete all as specified and directed.
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
S&F stop valve/angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.
S&F PVC connection 600 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.
S&F vitreous china bowl urinal flat back of size 465 x 355 x 265 mm, white excluding flushing cistern, flush pipe and waste pipe but including grating and union for discharge pipe complete including providing and fixing plus, beding urinal agianst wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing aroiund urinal back in cement complete all as specified and directed.
S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and laid on floors or fixed to walls with clamps complete all as specified and directed.
S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed.
S&F PVC(SWR) bends any radius 75 mm bore complete all as specified and directed.
S&F PVC(SWR) bends any radius 75 mm bore with access door complete all as specified and directed.
S&F 75 mm dia PVC (SWR) floor trap including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub base of under floors complete all as specified and directed.
M&L Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
M&L for brick work with fly ash bricks, old size, class designation 75(Kgf/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 20 mm thick (in two layers of 15+5 mm) on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item).
M&L for applying two coats of cement base paint over a coat of primer on new surfaces of walls including preparation of surface complete all as specified and directed.
M&L for machine cut kota stone 20 to 25 mm thick as in ramp, flooring or in trades of steps etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 15 mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
Excavation in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.
M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.
M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed.
M&L for rendering 5 mm thick on concrete surfaces of ceiling with CM (1:4) and finished even and smooth without using extra cement complete all as specified and directed.
S&F tripple layer rotational moulded polyethylene water storage tanks 2000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F 25 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Cutting existing GI pipes, 15/20 mm bore, laid in position for taking out branch connection by inserting new Tee and coller etc. complete all as specified and directed.
Returning filling in including spreading watering and well raming in layer excedding 25 cm each in soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 m and deposited where directed at a level not exceeding 1.5m above the starting point complete all as directed.
M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and fair including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails/ screws including fillets complete all as specified and directed.
S&F 2nd class hard wood, plain fillets, sectional area exc 13 sqcm but not exc 25 sqcm, square, rectangular or triangular in section, clean sawn, secured with screws and PVC plug of suitable size complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description and girth, not otherwise described and applying cresote oil complete all as specified and directed.
M&L for 12 mm thick perforated medium density fiber sound absorber wall paneling, exterior grade, colour and pattern as decided by GE, fixed to timber frame with screws including back filling with 50 mm thick acoustic glass wool sound observing material and refixing cables and casing and caping including taking down and refixing all appliances such as AC, Speakers etc, including extra wire, cable and other fittings required to make the appliances functional and to make Auditorium echo free complete all as directed. Note:- Work will be executed through specialized firm and certificate of Echo free will be furnished from certified agency before completion of work
M&L for 3 mm thick cover fillets of standard hard board, 40 mm wide and fixing with screws complete all as specified and directed.
S&F 32 mm bore single socketed low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceilings or laid in floors etc. with all fittings such as ends elbow, union, bend, reducer etc., including concealed in wall and making necessary holes complete all as specified and directed.
S&F in repair 12 mm thick perforated medium density fiber sound absorber, accoustic purpose as in ceiling, exterior grade, colour and pattern as decided by GE, fixed to GI or angle iron grid frame work with screws complete all as directed. Note:- Height of ceiling is more than 4.5 m.
Dismantling wrought iron or mild steel work of any description complete all as specified and directed.
S&F mild steel framed work such as grid for false ceiling grid in portion framed and hung with necessary hooks with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. Note:- Height of ceiling is more than 4.5 m.
S&F tie bar with screwed ends, nuts, washers and mild steel plates for wall, chimneys, roofs, arches, false ceiling grid etc., king rods and straining bolts conforming to Fe-290 Gde E-165 complete all as specified and directed. Note:- Height of ceiling is more than 4.5 m.
M&L preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including WPC @ 2 % by weight of cement finished even and smooth without using extra cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item).
M&L for rendering 10 mm thick on concrete surfaces of ceiling with CM (1:3) and finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.
Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm over on newly plastered surface of wall including preparation of surface complete all as specified.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L for glazed ceramic designer coloured tiles of size 450 x 350 x 6-7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 on other than fair faces of brick wall finished rough to fix tiles and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5 mm single side prelaminated PVC sheet & edges painted to match with prelaminated sheet and fixed with screws and rawl plugs complete all as specified and directed.
S&F Factory made solid PVC moulded door shutter 28 to 30 mm thick(stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specifications & drawings shown in section 8 of SSR Part II complete all as directed.
S&F 100 mm size stainless steel, butt hinges, medium weight ISI marked and fixed with screws complete all as specified and directed.
S&F 1.25 mm thick stainless steel plain sheet of grade 304, in wall cladding and similar works cut to size holes punched including round headed screws, clout nails or rivets into MS square tube grid 1.2 m x 1.2 m or less made of MS frame work made with 25 mm x 25 mm x 3.25 mm thick (minimum) square hollow pipe. The screws shall be placed at a distance of 150 mm and the edges shall be moulded/SS angle to be provided including polishing complete all as specified and directed.
M&L for machine cut kota stone slab of size not less than 550 x 550 mm (except where lesser size required) as in flooring or in trades of steps 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing, rounding of edges and mirror finish polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes including demolition of existing stone complete all as specified and directed
M&L for machine cut kota stone 12 mm thick as in risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix stone and taking down existing plaster complete all as specified and directed.
M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match with and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 complete all as specified and directed.
S&F in position powder coated (any colour and thickness of coating not less than 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 -100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and fixing with oil putty or rubber/wooden/aluminium beads and provsion of glazing pins where required in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
M&L for prepartion of old surface of wall incl. washing, rubbing down and stopping old distempered surface and applying one coat of oil emulsion paint complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 cm thickness(below or above ground level) incl removal of debriescomplete all as specified and directed.
M&L for 12 mm thick tempered, toughened glass, cut size, width n. exc. 1.8 M and height n. exc. 2.1 RM of each panel, polished edge, homogenious colour fixed as in glass shower partition, glass encloser or bathroom partition including necessary fittings, fixtures, brackets and accessories required like stainless steel self closing hinges, top railing, latches, handles or knobs, stop plate etc including rubber beading and silicon clear for hoints complete all as specified and directed.
S&F suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600 mm with GI frame work of main runner 38 x 24 mm sheet thickness 0.4 mm, cross tee 28 x 24 mm sheet thickness 0.3 mm and wall angle 24 x 24 x 0.3 mm including 7 mm thick designer PVC hollow plank celing to be placed in the grid suspended by 4 mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips complete all as specified and directed. Note : Pattern of design will be decided by GE
S&F Steel rolling shutters gear operated type with bevel gear box and crank handle made out of 1.25 mm thick steel sheet laths, with ball bearing, Saftey lever locks mild steel with 4 leavers - 02 Nos in each shutter as specified incluidng top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete all as specified and directed.
M&L structural Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes and posts conforming to IS:1161-1979 grade St.-240 complete all as specified and directed.
M&L pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) complete all as specified and directed.
M&L for preparation of new surface of wall and applying two coat of oil bound distemper with roller over a coat of primer with roller etc, complete all as specified and directed.
S&F in repair mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Taking down anodised aluminium door shutter, side hung and refixing in the same opening after repairing including necessary jointing cleats, Glazing clips, rubber packing, screws etc & with existing anodised aluminium snap beading including repair floor door clouser/ hydraulically regulated clouser and replacing glass if required complete all as specified and directed.
S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium sliding window shutters suitable to fix in three track rail (one shutter with wiremesh and two glass shutters) consisting of frame and mullion of 101.60 x 44.45 x 1.29 mm and shutters made of 63.5 x 31.75 x 1.29 mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. and aluminium beads 20 mm size with and including 5 mm thick sheet glass in front shutters and stainless steel wire cloth 0.36 mm dia and with average width of aperture 1.40 mm in inner shutter incl. S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium anodised chequered grill mesh size 101.60 x 63.5 mm (4” x 2.5”) and weight not less than 1.345 Kg/Sqm complete in all respect incl rubber breading, cleats, handles, rollers etc complete all as specified and directed.
M&L for surface excavation in soft/loose soil n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out.
M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base of floor/ path etc. complete all as specified.
M&L for parking tiles of size 300 x 300 x 10 mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
S&F aluminium composite sheet exterior grade 3mm thick for wall paneling work of any colour including aluminium frame work of section 50 mm x 37 mm x 1.5 mm thick fixed to wall in vertically or horizontally with approved solution/ self tightening screws to fix to panels, composite sheet of reputed quality and ISI marked complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
M&L for point wiring complete for one light/fan/ exhaust fan point controlled by one, one way 5 Amp switch with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including concealed terminal switch boxes for modular switches, modular plate and cover of suitable size for fixing switchs, sockets, regulators etc. including 1.50 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed. Note- (i) Rates include the cost of modular plate modular boxes and covers of suitable modules as required at site. (ii) Modular box, plate and cover shall be of same make as of switch/socket/regulator.
M&L for taking down existing serviceable ceiling light fittings of any type/ wattage for re-use/ refixing at same or other location after making connection with 3 core copper flexible cable of size 1.0 Sqmm from ceiling rose/ PVC connector to light fittings complete all as specified and directed.
M&L for taking down carefully existing wall fan for greasing / oiling of ball bearings / bushes and making it smooth and noise free operation and re-fixing after providing new fan clamp, nuts/bolts, washers and provision of 3 core copper flexible cable of size 1.0 Sqmm from ceiling rose to fan connector complete all as specified and directed.
S&F in replacement of recess mounted rectangle of size 12” x 6” LED green colour ‘EXIT’ light made with aluminium alloy extrusion 5 watt, 230 V with battery backup complete all as specified and directed.
S&F in replacement modular metal flush box 8 module, complete all as specified and directed.
S&F in replacement modular cover plate 8 module, complete all as specified and directed.
S&F in replacement modular switch, single pole, 1 way 5/6 Amp, 230 Volts, 1 module complete all as specified and directed. Make: MK/ Legrand/ ABB.
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50 mm dia complete all as specified and directed.
M&L for point wiring complete for one light/fan/ exhaust fan point controlled by one, one way 5 Amp switch with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including anodised pressed steel concealed terminal switch boxes not less than 1.20 mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed.
All as per item No. 104 above but for one 5 pin 5 Amp socket outlet point on an independent board.
All as per item No. 104 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per Item No 104 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm and green colour earth cable of size 2.50 Sqmm.
S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.
S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 6 pin 5/6 and 15/16 Amp, 230 volts complete all as specified and directed.
S&F in replacement existing U/S light fitting with energy saving decorative LED batten 20 watt (4 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffusre & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Note:- Power factor should not be less thtn 0.95 Make- Halonix Cat part No- HLTLD-04-20-CW, ORIENT Cat part No-LBLN-20-C-AL /Philips Cat part No- BN021C LED22S PSU CW GR
S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single pole and neutral 240 volts, 8 way, including suitable size copper bus bar and metal door, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.
S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection TPN 415 Volts, 4 way, including suitable size copper bus bar and metal door, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.
S&F in replacement MCB TPN 240 volts, 'C' curve of rating from 40 to 63 amps, 50 Hz with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
S&F in replacement MCB single pole 240 volts, 'C' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
S&F in replacement MCB SPN 240 volts, 'C' curve of rating 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
S&F in repair sub main wiring with two single core PVC insulated (FRLSH) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLSH) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20 mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.
Supply, Installation and Commissioning of SS Exhaust hood of size 1800 x 900 x 600 MM with SS Baffle filter in 18 SWG thick stainless steel of grade 304 complete all as shown in drawing No. SNCOS/02. Note: All fittings and fixtures as per mentioned dwg are included in item.
Supply, Installation and Commissioning GI Exhaust air ducting 24 SWG thickness of sheet bend into required shape, all parts hinged together with rubber gaskets zinc coated nut bolts to remove air gaps complete all as directed and specified.
S&F 550 mm diameter Axial Fan (Exhaust blower machine) with minimum air flow capacity of 5000 CFM attached with 2 HP motor with minimum 1440 RPM of approved make including fixing at site complete all as specified and directed.
M&L for removal of existing old unsv earthing complete and providing new earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way with angle iron frame allround made of AI 40 x 40 x 4 mm, adequate qty of charcoal dust and salt layers all around the earth plate, including earth work in any type of soil, removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).
m/s Agra Builder
Rakesh Kumar
saroj constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .