Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹17.7 LAdmitted-Finance | -37.82% | ₹17.7 L | L1 | Admitted-Finance |
| 2 | L2₹21.1 L+₹3.3 L (18.8%)Admitted-Finance | -26.10% | ₹21.1 L+₹3.3 L (18.8%) | L2 | Admitted-Finance |
Tender Value
₹28.5 L
EMD Value
₹57,083
Closing Date
30 Jul 2026, 3:00 pmClosed
CHANDRESH KUMAR
EE/DPD-4
Shade Work, Distempering and White Wash of remaining areas, Stone Work and Connection of remaining PVC Pipes etc. at MIG Housing Sector-19B, Dwarka.
2026_DDA_918603_1
14/EE/DPD-4/DDA/2026-27
Open Tender
Civil Works
Works
90 days
EE/DPD-4
Please refer Tender documents.
10 documents required · 10 mandatory
₹0
₹57,083
31 Aug 2026
22 Jul 2026
31 Jul 2026
22 Jul 2026
30 Jul 2026
22 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
(i) Single socketed pipes.
(a) 110 mm diameter | 189 | Metre | 377.4 | ₹71,328.6 |
| 2 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.
(a) 4 mm thick corrugated. | 238.75 | Sqm. | 1,701.61 | ₹4,06,259.39 |
| 3 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
(a) Hot finished seamless type tubes | 1,678.25 | Kg. | 206.35 | ₹3,46,306.89 |
| 4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 355.2 | Kg. | 133.7 | ₹47,490.24 |
| 5 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
(a) 1.00 mm thick with zinc coating not less than 275 gm/m2 | 50 | Sqm. | 1,457.15 | ₹72,857.5 |
| 6 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | 334.4 | Sqm. | 747.8 | ₹2,50,064.32 |
| 7 | Providing and fixing wire mesh of opening size 75x25 mm or other suitable size including Cutting, Welding complete as per direction of Engineer-in-Charge. | 105 | Sqm. | 778 | ₹81,690 |
| 8 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications:
(a) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | 603.34 | Sqm. | 170.7 | ₹1,02,990.14 |
| 9 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram / litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour.
(a) Old work (one or more coats) | 4,140.99 | Sqm. | 62.7 | ₹2,59,640.07 |
| 10 | White washing with lime to give an even shade:
(a) Old work (two or more coats) | 3,960.71 | Sqm. | 22.85 | ₹90,502.22 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.50 MB
NIT14.pdf
Tender Documents • 2.34 MB
BOQ_965351.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .