SPL REPAIR TO BLDG NO P 39 AT MH AND BLDG NO. P 03 QM STORE AND P 04 MT OFFICE AT OLD AMRITSAR CANTT UNDER GE AMRITSAR

Amount

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Material and labour for brick work with sub-class 'B' bricks straight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:4 complete all as specified and directed.

All as per Srl item No 2 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 1 shall be reused after necessary cleaning of mortar).

Material and Labour for brick work with sub class "B" old size bricks, in half brick thick wall in cement mortar 1:3 complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws all as directed.

All as per Srl item No 6 above but except sheet (old dismantled serviceable sheet obtained from Srl item No 5 shall be reused after necessary cleaning)

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and Labour Virified Ceramic tiles 8mm/9mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed.

Supply and fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

Supply and fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) (reinforcement cut as required to facilitate demolition)

Material and Labour RCC(Nominal Mix) type B1 1:2:4 ( 20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

Supply and fixing Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces of concrete.

Material and Labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Supply and fixing vitreous china wash hand basin white Oval shape of size 550x400mm excluding taps chain and plug and porcelain stopper but including brackets including cutting for and pinning ends of brackerts complete all as specified,

Supply and fixing pillar taps fancy type swan neck of 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes.

Supply and fixing in repair 15mm bore angle cock cast copper alloy of CP screwed down high pressure with crutch or butterfly handle complete.

Supply and fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

Supply and fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

Material and Labour Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4

Supply and fixing for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron)

Supply and fixing Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified (minimum thickness of powder coating 50 micron).

Supply and fixing in Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Material and Labour for Sheet glass, ordinary quality 5.5mm thick in square exc 0.5 sq. m in each pane including rubber packing and aluminium beading complete all as specified and directed.

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Material and Labour for Rendering 12 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement)

Material and Labour for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement)

Material and Labour for complete removal of existing treatment of wall surfaces and applying two coats of cement base paint paint over a coat of cement primer on external wall surfaces complete all as specified.

Material and Labour prepared of old plastered surfacecomplete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulsion white or tinteted over and including 1mm thick wall care putty complete all as specified.

Material and Labour for preparation of newly plastered surfaces and applying two coats of cement base paint paint over a coat of cement primer on external wall surfaces complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Excavation in post holes each n.exc 0.5 cum getting out, returning, filling in ramming earth or borken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n.exc 50m and making good complete in hard dense.

Supply and fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 ®

PCC 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete of post holes.

Preparation of new/old steel surface of any description,over 10cm in width or girth ,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.complete all as specified and directed.

PVC (SWR) pipes single110mm socketed, in any length with rubber ring joints, laid in trenches or in floors

Dismantling Brick tiles or terracing tiles, single layer on roofs ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed by Engineer-in-Charge.

All as per Srl Item No. 44 here-in-before but except brick tiles. Note:-Old serviceable tiles shall be reused.

Dismantling wall and ceiling board (fibre, pulp, insulation etc), or insulation boards/slabs/blankets any thickness including cover fillets

Supply and fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to at 457 mm centre including GI Hanger 6mm dia (Upto 1200mm length) adjusting level fixed to roof slab by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Material and Labour Seamless calcium silicate ceiling 12mm thick made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) including material and labour for preparation of ceiling surfaces and applying 02 coats of OBD complete all as directed.

Taking down chowkat or frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each

Taking down chowkat or frame with shutter (without taking off shutter from frames) exc 1.5 Sqm and n.exc 4 Sqm

Supply and fixing pressed steel frames 1.25mm thick for door size of frame125 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.

Material and Labour PCC 1:2:4 , type B-0 (using 12.5 mm graded stone aggregates) in bed blocks for hold fast and similar nature of works

Supply and fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both side

Supply and fixing 2nd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

Supply and fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Supply and fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed.

Supply and fixing 150mm long Aluminium handles, cast type anodised.

Supply and fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

Material and Labour two coats of synthetic enamel painting on newly wooden surfaces of any description over 10 cm in width or girth not otherwise described above one coat of pink primer including prepration of previously untreated surfaces.

Material and Labour for applying two coats of whitewash on wall surfaces including preperation of newly plastered/old decorated surfaces complete all as specified and directed.

Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base of 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified

All as per srl Item No 61 here-in-before but as in skirting/dado over rendering 15mm thick in CM 1:4.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar.

Material and Labour for rendering 5mm thick cement plaster in cement mortar (1:3) on concrete surfaces as in ceiling, finished even and smooth without using extra cement complete all as specified directed by EIC.

Material and Labour preparing New plastered surfaces applying two or coats of 100%Premium acrylic emulsion paint having VOC less than 50 Gm/litre and UV resitance as per IS 15489: 2004, Alkali & fungal resisitance , dirt resitance extterior paint of required shade (Company Depot Tinted) withsilidon addiitives @ 1.43 litr/10 Sqm over and including priming coats of exterior priomer applied @ 0.90 litrs/10 Sqm over new surfaces all as specified

Material and Labour preparing old plastered surfaces applying two or coats of 100%Premium acrylic emulsion paint having VOC less than 50 Gm/litre and UV resitance as per IS 15489: 2004, Alkali & fungal resisitance , dirt resitance extterior paint of required shade (Company Depot Tinted) withsilidon addiitives @ 1.43 litr/10 Sqm over and including priming coats of exterior priomer applied @ 0.90 litrs/10 Sqm over new surfaces all as specified

Material and Labour preparing New plastered surfaces on walls one coat of primer paint, and applying two coat of oil bound distemper with 1 mm wall care putty complete all as specified directed by EIC. (Interior)

Material and Labour for preparation of new plastered ceiling surfaces one coat of primer paint and applying two coats of white wash complete all as specified and directed.

Material and Labour for preparation of Old plastered surfaces complete removal of existing treatment on Ceiling one coat of primer paint surfaces and applying two coats of white wash complete all as specified and directed.

Material and Labour Brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:6 complete all as specified and directed .

M & L for roughening old surface of concrete roof/floor etc by picking, sweeping and washing down with water to remove dust/dirt and brusing neat cement slurry with 3.0 Kgs per Sqm complete all specified and as directed.

Supply and fixing in repair 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, incl hacking out complete all as specified directed by EIC.

Supply and fixing Factory made steel window/ventilator box type, primer coated , comprising made out of ERW Hollow 'P' section of size 6mm x 25mm of wall thickness frame 1.25mm single rebated frame and comprising glazed and skelton shutter made of ERW sec 50mmx20mm with 1mm thick wall thickness and operated leaf side top hung divided in three panel by flat iron suitable size complete welded to frame of shutter and openable shutter prepared to receive wire gauze including provision of flat iron riveted bolt to secure wire mesh, complete including cuttisng holes four nos for each window for hold fast and PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in hold fast size of PCC 150x230x75mm (04 Nos in each window) including necesssary form work complete and including following fittings welded to frame/shutter :- (a) Hold fast 150mm long 25mm x 6mm iron made to shape - 02 Nos in each window (02 Nos each side). (b) Handle of 'Z' section 20mmx25mm, 100mm stopper - 01 No in each leaf (c) MS tower bold 150mm long - 02 Nos in each leaf. (d) Cleat 55mm long of hollow square 15x15x24mm welded to hingesgauze wall thickness welded to hings of 50mm size - 01 No per leaf. (e) MS Box type hinges of size 75x12mm - 03 Nos per leaf. (f) Fabrication & Fixing complete. NOTE :- (i) Glass panes and painting shall be measured & paid separately under respective items. (ii) Design shall be got approved from the Engineer-in-Charge as per Drg No CELZ/TD-1020/08 Sh NO 1/3 to 3/3 before fabrication and bulk order to the manufacturer.

Supply and fixing fixed in repair Aluminium (extruded Section body) door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified directed by EIC.

Supply and fixing 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed,complete all as specified directed by EIC.

M & L for Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Material and Labour for 25 mm thick Cement Concrete 1:2:4 type B0, (12.50 mm graded aggregate) as in flooring

Material and Labour 12mm thick fully perforated micro tegular /10mm thick square edged GRG flase ceiling tiles for Providing & fixing false ceiling at all heights and wall paneling with GRG (Glass fiber reinforced gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS-8225:1987, noncombustible as per DS 476 (part-4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm on both sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm), 50mm long, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engg-in-Charge

M & L 75 mm thick, plain cement concrete 1:3:6, type C-1 using 20 mm graded mechaically crused stone aggregates, laid in 1:20 slop as in Plinth protection/paving/shafts including making joints at 3.00 mtrs intervals and at each corner, the joint shall be filled with mastic filling to full depth) comprising of one partheated hot below bitumen 85/25, two parts heated sand (by volume) as per TD Drg No CEJZ/TD-1058/08 Sheets No 1/4 and 3/4 as applicable, surface fininshed even and smoot witout using extra cement complete all as specified. Note : The concrete shall be laid at a strech not exceeding 3 mtr in legth and width of joint shall not more than 12mm.

M & L type B0 1:2:4 (12.50mm graded aggregate) for Reinforced cement concrete (nominal mix) repair in Chajjas, projection of roof including form work and necessary scaffolding etc complete all as specified and directed.

Material and Labour for Coloured chequered cement concrete tiles 20cmx20cmx25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment including 75mm thick plain cement concrete 1:4:8 type B-2 using 40mm graded crushed stone aggregate) for sub base above 20mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed.

Taking down aluminium/Copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

Material and labour, Modular point wiring concealed type with PVC insulated (unsheathed) cable 1.5 Sqmm (Nominal area multy stranded FRLS Copper conductor 1100 volts grade and continous earth wire PVC insulated 1.5 sqmm copper conductor to comman earth in and including New PVC conduit chasing and with new sunken boxes for modular switches/sockets & sheet and frame for/Modular switches/sockets/Regulator & making good the disturbed surface ) complete all as specified and directed by Engineer-in-charge for the following Note: Switches & Plate shall be measured and paid separately. (a) For one light /fan/ buzzer point controlled by one 5 Amp Modular switch one way

(b ) For one five pin 5 Amp modular socket outlet on the independent board complete.

(c) For one five pin 5 Amps modular socket outlet on the same board with other switches

All as per Item No 84 here-in-before but with 2.5 Sqmm (nominal area) PVC insulated and PVC sheathed FRLS cable stranded copper conductor for modular one 3 pin 15 Amps socket outlet independent with earth wire PVC insulated and unsheathed FRLS cable of size 1.5 Sqmm as earth lead complete all as specified and directed

Supply and fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

Supply and fixing Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed by Engr-in-Charge

Supply and fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

Supply and fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as req heavy duty 230 volts complete all as specified and directed

Supply and fixing Modular White cover plate with frame,3 module all as specified and directed.

Supply and fixing Modular White cover plate with frame,4 module all as specified and directed.

Supply and fixing Modular White cover plate with frame,6 module all as specified and directed.

Supply and fixing Modular White cover plate with frame,8 module all as specified and directed.

Supply and fixing Modular White cover plate with frame, 12 module all as specified and directed.

Supply and fixing ceiling rose 65X50 mm two to three terminals complete all as specified.

Supply and fixing of lamp holder PVC/ polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting complete all as specified and directed

Supply and fix 15 watt LED ceiling light panel fitting with accessories including with suitable size of 230 Volts, 50 HZ complete all as specified and as directed

Supply and fixing SMD LED panel recess/surface suspended mounting 40 wat 2' x 2' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 volts, 50HZ complete all as specified and directed

M&L, Sub main wiring with two single core 10 Sqmm (nominal area stranded copper conductor FRLS PVC insulated and unsheathed cables drawn in and including non metalic PVC regid conduit medium grade of suitable size with all standard fittings, concealed including one run of continous PVC insulated stranded copper conductor FRLS cable 4 Sqmm (nominal area for earth continuity, including taking out and removal of old sub main wiring complete all as specified and directed Note:- 1 Two runs of 10 sqmm main cable one run of 10 sqmm for earth cable & condut shall be measured as one unit/ one running meter. 2. Rate quoted shall be deemed to include cutting chases for concealing condut and making good in cement cortar 91:4) or PCC (1:2:4) as required.

M&L, Sub main wiring with two single core 6 Sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cables drawn in and including non metalic PVC regid conduit medium grade of suitable size with all standard fittings, concealed including one run of continous PVC insulated stranded copper conductor FRLS cable 4 Sqmm (nominal area for earth continuity, including taking out and removal of old sub main wiring complete all as specified and directed Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable & condut shall be measured as one unit/ one running meter. 2. rate quoted shall be deemed to include cutting chases for concealing condut and making good in cement cortar 91:4) or PCC (1:2:4) as required.

M&L, Sub main wiring with two single core 4 Sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cables drawn in and including non metalic PVC regid conduit medium grade of suitable size with all standard fittings, concealed including one run of continous PVC insulated stranded copper conductor FRLS cable 4 Sqmm (nominal area for earth continuity, including taking out and removal of old sub main wiring complete all as specified and directed Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable & condut shall be measured as one unit one running meter. 2. rate quoted shall be deemed to include cutting chases for concealing condut and making good in cement cortar 91:4) or PCC (1:2:4) as required.

Supply and fixing sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

Supply and fixing MCB single pole 6 to 32 Amps all as specified and directed

Supplying and fixing in replacement MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed

M & L for sheet steel enclosures distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed with the following accessories. (a) MCCB 200 amos. 25 KA. TP. 415 volts. 50 H =01 No

Taking down carefull the exisiting servcieable ceiling fans any make any size any sweep and removing electric connection and keeping in safe custody and refixing the same in the same position including making electric connection complete all as specfied and directed.

Supply and fix LED tube light 20 watt, (4' long), 6500k, wall mounted, E-lite LED curve with high lumen batten eith efficacy of 100 lumens, with integrated electronic driver complete with all accessories complete all as specified and directed.

Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps as specified and directed (for AC and geyser):

Supply and fix, exhaust fan of size 250mm.Plastic body 1400RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work, wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection and taking down existing exhaust fan, complete all as specified and directed. Note: Making suitable opening for fixing exhaust fan shall be deemed included in the auoted rate of item.

Supply and fix, exhaust fan of size 350mm.Plastic body 1400RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work, wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection and taking down existing exhaust fan, complete all as specified and directed. Note: Making suitable opening for fixing exhaust fan shall be deemed included in the auoted rate of item.

Supply and fix, exhaust fan of size 450mm, Plastic body 1400RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, dynamically balanced impeller for smooth and vibration free operation, complete with louvers, nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work, wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection and taking down existing exhaust fan, complete all as specified and directed. Note: Making suitable opening for fixing exhaust fan shall be deemed included in the auoted rate of item.

Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of Gl Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia Gl medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm PCC pit for holding the pit cover including providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-l of SSR-2009 complete all as specified and directed. NOTE: (a) Cost of excavation, earth work, watering pipe, test point, MS Funnel with wire mesh and PCC pit with cover will be deemed to be included in the quoted rate. No extra cost shall be paid to the contractor against these items. (b) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor & no extra cost will be given to the contractor.

J S S BUILDERS & ENGINEERS (BID ID -3378505)

S S CONSTRUCTION COMPANY (BID ID -3378748)

M/s. M Company (BID ID -3378184)

GEE EMM ASSOCIATES (BID ID -3377879)