COMPREHENSIVE REPAIR TO BUILDING NO P 5/12 P 5/16 P 5/20 AND P 5/21 AND OTHER OTM AREAS UNDER AGE B/R I OF GE SATWARI

Amount

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material from the work site ouside defence premises complete all as specified.

Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site out side defence premises complete all as specified.

Demolition of reinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr as specified.

Dismantling of ceiling board(Fibre, pulp, any type of insulation etc) or insulation board / slabs/any thickness including cover fillets

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified. Note :- Work will be carried out of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account.

Dismantling of CGI/AC/ fiber or plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof covering.

Dismantling framed trusses n exc 10.00 M span complete all as specified

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each and removing from the site all as specified & directed.

Taking down shutters of any description exc 2.00 Sqm each and removing from the site all as specified & directed.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

M&L Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

M&L Rolled/Square/round pipe sections as in main and cross beams, vertical post, hip and jack, trusses rafters; purlins, trusses, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality-A complete all as specified.

M&L Plates (plain ) channels, square cut or notched, gusset plates, base plate (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality-A complete all as specified.

S&F Mild steel screw bolts dia 16 mm to 20 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Complete all as specified.

Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by Engineer-in-charge.

M&L Second class hard-wood in scantlings or timber framed and fixed complete all as specified.

Material and labour for Providing, cement concrete 1:2:4 type B-1 (using 20mm graded aggregate ), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Supply and Fixing Brass Mortice lock, vertical type, size 100 mm, 4 leavers complete all as specified. ( Sample approved by Engr-in-charge)

Supply and fixing 4.80/ 5.00 mm thick glass sheet ordinary quality Tinted ( approved by Engr-in-Charge/ GE) and glazed in squares, exceeding 0.5 Sqm in each pane.

Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.

Supply and fixing in repair double action door spring hydraulically regulated (heavy duty) made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty. (ISI Marked)

M&L Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4.0 mm thick coloured/tinted/frosted glass panes including aluminium grill and all necessary fittings and fixtures complete all as per Engr-in-charge. Make : Jindal,Hindalco,Indal

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including PCC 1:3:6 as in back fill to chowkats all as spfd.

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including PCC 1:3:6 as in back fill to chowkats all as spfd.

M&L 35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied.

S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads.

S&F Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats , Piano hinges measured separately.

S&F in repair continuous (piano) hinges, heavy duty mild steel, bright finish or electro galvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)

M&L Flush shutters, 25 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note:- Sampel approved by Engr-in-Charge or GE.

S&F in repair Soild PVC door frame of size 50 mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S & F in repair Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

S & F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.

S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)

S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed cpmplete all as specified.

S&F aluminium Floor door stopper fixed complete all as specified.

S&F in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

Supply and fixing in repair GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid including taking down of old us material complete all as specified and directed by Engr-in- Chage. Make: Gyproc,Lafarg Boral Gypsum India,India Gypsum, Armstrong

S & F in repair mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified.

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20-22 gauge and with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings)

S&F steel window/ ventilator 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 ( Note:- Grill measured separately)

S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.

S&F 4 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified.

S&F 4 mm thick figured glass, pin head/frosted type and glazing with oil putty in square n.exc 0.5 sqm in each pane.

Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.

S&F Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel wire staples complete all as specified.

M&L Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge

M&L Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge

Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust.

M&L Rendering 15mm thck in CM 1:4 on Concrete surfaces of roof finished fair & evenr and including mixing of water proofing compound (WPC shall be measured and paid separately)

M&L for water proofing treatment in the following sequences:- (a) Applying 1st course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely (bi) Applying 2nd coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (C) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat complete all as specified and as directed . Make :-Torchstar, Asian Paint, Sieka.

M&L for preparation of newly sufrace of APP Membrane and applying two coats of water based bituminious alumunium paint @ 200 ml per sqm etc complete all as specified and as directed by Engr-in-Charge.

M & L Glazed digital ceramic coloured tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over and included 10 mm thick rendering CM 1:4 all as specified. ( sample as approved & kept in GE's sample room)

M&L Non - skid digital, anti scratch, anti fungus, Ceramic joint less colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over 15mm thick screed bed complete all as specified and as directed. ( sample as approved & kept in GE's sample room)

M&L 25 mm thick PCC 1:2:4 type B-1 using 12.50 mm stone graded aggregat as in floor finished rough complete all as specified and as directed.

M&L Virified Ceramic (double charged) any shade tiles 15 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. using 4 mm spacers set and jointed in neat cement slurry and pointed in white or coloured tile epoxy grout as per the manufacturer specifications to match over 15 mm thick screed bed in C:M 1:4 complete all as specified and as directed

M& L Virified Ceramic (double charged) any shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting, dado etc. using 4 mm spacers set and jointed in neat cement slurry and pointed in white or coloured tile epoxy grout as per the manufacturer specifications to match over 10 mm thick screed bed in C:M 1:4 complete all as specified and as directed.

Material and labour for grinding, rubbing and polishing with machine on existing kota stone/moisac flooring/skirting laid in position including all necessoy repair work and filling of joints with grey cement mixed with pigment to match the shad complete all as directed by the Engineer-in-Charge.

Material and labour for machine cut kota stone single piese slab in flooring 20mm to 25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polish and including over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) all as specified and directed by Engineer-in-Charge.(Note:- Kota stone will be laid in patches)

Material and labour for machine cut kota stone slab 20 mm to 25 mm thick as in skirting/dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polish complete over and including 10mm thick rendering in cement mortar 1:4 all as directed by Engineer-in-Charge. (Note:- Kota stone will be laid in patches)

Dismantling water tanks 500/1000 ltr and removing from site complete all as specified.

Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified Make : Vectus, Sintex, Sheetal.

S&F in repair Stop valves, (sutable for 25mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)

S&F in repair Stop valves, (sutable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)

S&F in repair CP pillar cock with 450mm long braided hose, 15 mm bore fancy type complete all as specified and directed by Engr-in-charge/ GE. Make:- Essco/ Jainko / Prayag

S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe, complete all as specified. Make:- Essco/ Jainko / Prayag

S&F in repair CP Bib taps,long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified. Make:- Essco/ Jainko / Prayag

S&F in repair Concealed Stop Cock Heavy Body Casted Cap 15 mm complete all as specified. Make:- Essco/ Jainko / Prayag

S&F in repair cromium plated toilet roll holder, complete all as specified. Make:- Essco/ Jainko / Prayag

S&F in repair Cromium plated, minimum 20 mm dia, single towel rail 600mm long complete all as specified. Make:- Essco/ Jainko / Prayag

S&F in repair Cromium plated, towel ring square, complete all as specified. Make:- Essco/ Jainko / Prayag

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail complete all as specified. Make:- Essco/ Jainko / Prayag

S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Essco/ Jainko / Prayag

S&F in repair Urinal with complete accessories Set, cp waste cuppling, waste pipe, sprader etc. Size: 375 x 390 x 590mm complete all as specified. Make:- Cera, Cat No- S4020112 or equivalent in Jaquar/Cera/Hindware.

S&F in repair urinal sprader cpmplete all as specified complete. Make:- Cera, Cat No- F8070201 or equivalent in Jaquar/Hindware.

S&F in repair Urinal partition fixing accessories complete all as specified. Make:- Cera, Cat No:- S4090101 or equivalent in Jaquar/Hindware.

S&F in repair under counter basin with fixing accessories set, size: 560 x 470mm, Oval shape, including CP cuppling and PVC waste pipe complete all as specified. Make :- Cera, Cat No- S2030104 or equivalent in Jaquar/ Hindware.

S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Cera, Cat Part No-S3010102 (CALINA) or equivalent in Jaquar/Hindware.

S&F in repair Vitreous china wash down water closet white colour, Size(520x360x390) with 'S' trap, closed pattern with flat bottom, including seat cover complete all as directed. Make:- Cera, Cat Part No- S1053101 or equivalent in Jaquar/Hindware.

S&F in repair single flush Cistern with Drainage L-Bend Pipe with Gasket & Installation Kit (Suitable for EWC), complete all as specified. Make:- Cera, Cat No- B1010109 or equivalent in Jaquar/ Hindware.

Supply and fixing PVC Seat cover for EWC pan (White ) of standardd quality including hinges bolt etc all as directed by Engr-In-Carge. Make: CERA,Cat No- B1510121. or equivalent in Jaquar/Hindware.

Supply and fixing PVC Waste pipe 32mm bore for required length complete with waste coupling. Make:- Essco/ Jainko / Prayag

M&L 16 to 18 mm thick Granite black (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

M&L for Reinforced cement concrete 1:2:4 (20 mm graged aggregate) (nominal mix) as in slabs supported on walls, beams and coloumns and the like slab laid in slops all as specified and directed.

S&f mild steel deformed bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc. all as spfd.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.

S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 355mm x 200mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make:- Jainko Model No .-SSJ-8. & equivalent in Prayag, Nirali, Jayana.

S&F in repair cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified. Make :- Jaquar Cat No- ALD-563 or equivalent in Cera/Hindware.

S&F in repair PVC connection 15 mm x 450 mm including PVC check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Prayag, Cat No:- 323 or equivalent in Essco/Jainko.

Supply and fixing in repair float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of bore 20mm. ( including necessary fittings)(Min weight 210gm). Make: Prayag, Sintex Polytuff

Takind down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel all as spfd.

Takind down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors.

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors.

Fixing only 20 mm dia tubes, any grade, to walls and ceilings or laying in floors.

S&F in repair stainless steel gratings dia 100 mm incl all necessary fittings such as hinges including embeding in tiles with white cement.

Taking down CI/PVC pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

S&F UPVC (SWR) Type-B, pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B pipes single socketed, 110 mm dia, in any length with rubber ring joints, Fix to wall complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, fix to wall complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B bends, 75 mm any radius complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B bends, 110 mm any radius complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B junction single, 75mm (Single T) equal or unequal complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B junction single, 110 mm (Single T) equal or unequal complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B, floor trap, (75mm diameater for outlet in mm), plain with grating including jointing with solvent cement complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B multi floor trap with grating including jointing with solvent cement (75mm diameater for outlet in mm) complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR)Type-B gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B vent cowl 75 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.

S&F UPVC (SWR) Type-B reducers 110 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.

M&L Cement concrete type C-2, 1:3:6 as in floor 75 mm thick all as specified by Engr-in-charge.

M&L Cement concrete tiles 25cm x 25cm x 25mm thick, machine pressed set jointed and pointed in neat cement slurry in floors, (with white cement and pigment) and cut and polished. Over 15 mm thick CM 1:4 cpmplete all as specified.

M&L for 50mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement all as specified.

Material and labour for rendering 05mm thick in CM (1:3) as in ceiling finished even and smooth w/o using extra cement.

M&L for preparation of new plastered/concrete surfaces of walls, (with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

M L for preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

M&L for preparation of old decorated plastered /concrete/ brick surfaces of walls ( with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.

M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of oil bound distemper on old decorated wall surface including necessary filling of wall care putty on uneven surface as and where required.

M&L for preparation of old/new decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified

M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and where requered to make surface even and smooth.

M & L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of ceiling booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the Ceiling, pillars, cornices etc. complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of lime white wash on the Ceiling, pillars, cornices etc. complete all as specified and directed.

Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

M&L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH-PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH-PVC insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into GI modular sunken boxes including white cover plate with frame as per relevant IS for mounting moudlar switches, sockets, fan regulators etc complete all as specified and as directed for the following :- (a) One light/ fan point/exhaust fan point controlled by one way switch 6 Amps.

(b) One 3 pin Socket outlet 6A point on same board.

All as per Srl item No 137 above but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

S & F moudlar switch piano flush button single pole one way, 6 Amp,1 moudle. Complete all as specified and directed. 240 V

Supply and fix moudlar Socket outlet 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed.

Supply and fix moudlar Socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as di rected.

Supply and fix moudlar Switch piano made of polycarbonate flush button single pole one way, 16 Amps, 230/240 V complete all as specified and as directed by Engineer-In-Charge.

THAKUR BUILDERS AND CO

M/S R S CONSTRUCTION CO

M/S ANIL MAHAJAN

M/S S K Electricals Regd