Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-AOC NO 05 THOLKAPPIAR STREET ASHOK NAGAR LAWSPET PUDUCHERRY 605 008 | PONDICHERRY | PUDUCHERRY | 605008 | L1 | Accepted-AOC lowest tenderer | |
| 2 | L2₹5.9 L+₹22,300 (3.95%)Rejected-Finance NO 4 85 MICRO STREET MORATTANDI VANOUR TALUK TAMILNADU 605 111 | VILLUPURAM | TAMIL NADU | 605111 | L2 | Rejected-Finance Not Lowest |
Tender Value
₹6.6 L
EMD Value
₹13,154
Closing Date
8 Aug 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, ID., PWD., Puducherry.
The Executive Engineer, Irrigation Division, PWD., No.3, Eveche Street, Puducherry.
Re-placing the damaged screw gearing steel shutter arrangements of Kumarakoil Odai Regulator in Bangaru channel near Bahour Tank in Bahour Commune, Puducherry.
2024_PWDC2_16174_1
TN.17/PW/IRRN/2024-2025
Open Tender
Civil Works
Item Rate
120 days
Puducherry
Please Refer Tender Documents
3 documents required · 3 mandatory
₹525
₹13,154
6 Dec 2024
23 Jul 2024
9 Aug 2024
23 Jul 2024
8 Aug 2024
23 Jul 2024
Amount
Fabrication,supplying and erection of screw gearing steel shutters size above 1.00m and upto 2.00m width consist of skin plate made out of 8mm thick mild steel plage and horizontally stiffened with 100 x 50 mm steel channel (ISMB.00) At an interval not more than 0.50m and vertical stiffeners made out of same section at an interal not more than 0.60m and provided with 8mm thick Mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc., Conyeying the fabricated shutters by using lorries including loading, unloading and leading the shutters to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary cutting equipments. Erecting the new shutter and the shuttering arrangemetns in the vent in proper position by using necessary hoisting equipments. The shutter shall be paint with two coats of Anticorrosive black paint over one coat of red oxide primer. The rate incluiding cost of materials, consumbles, labours, power charges. Conveyance charges, charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trail operation of shutter and warranty for 5 years etc., completed as directed by the Engineer-in-charge.
Fabrication, supplying and fixing of shutter groove Angle made up of 65x65x6mm mild steel angles for required height including welding hold fast of size 25x25x6mm mild steel angle 2 Nos. on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismandling the existing damaged groove angles, conveying and stacking at section store. The groove angle should be painted with two coats of anticorrosive black paint over one coat of red oxide primer. The rate including cost of materials consumables labours charges for all fabricating and hoisting equipment, conveyance petty civil works and warrent for 5 years etc., complete.
Fabrication, supplying and fixing of 50mm dia screw rod made up mild steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw road to the work site. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing amaged screw rod, conveying and stafking at section store. The screw rod should be painted with two coat of anti corrosive black paint over one coat of red oxide primer. The rate including cost of materials labours charges for all fabricating and hoisting equipment conveyance charges for labours and materials and warrenty for 5 years etc., complete.
Fabrication, supplying and fixing of Top beam made up of 150x75mm (ISMB 150) duly drilled to suit the Head set Assembly with required bed bolt made out of 25mm mild steel round rod duly threaded with suitable anchorage arrangements to a height of 0.60m with necessary fish plate made out of 12mm mild steel plate size 0.30x0.15m. 2 Nos. with required holes. Conveying and leading the top beam arrangements to the worksite fixing the top beam, arrangement at the top of the vent in correct position including dismantling the existing eroded top beam, conveying and stacking at the section store. The top beam should be painted with two coats of anticorrosive block paint over one coat of red oxide primer. The rate including cost of matrials, labours, charges for all fabricating and hoisting equipment, cost of petty civil works conveyance charges for labour and materials and warrenty for 5 years etc., complete.
Fabrication, supplying and fixing of Head set assembly light duty with hexagonal nut (approximate 50 Kg) made up to cast iron including moulding machining and the hexagonal nut threaded to suit the screw rod provided with thrust bearings for smooth operation. Conveying and leading the Head set assembly the work site. Fixing the head set assembly to the top beam by using required nuts free bolts and nuts in proper alignment including dismantling the existing damaged. Head set assembly conveying and stacking at section store. The Head set assembly supplied with operating key and the both should be painted with two coats of anticorrosive black paint over one coat of red oxide primer. The rate including cost of matrials, labours, charges for wooden pattern, moilding and charges for all machining equipments conveyance charges for labours and materials and warranty for 5 years etc., complete.
Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand)
12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand)
White washing with lime to give an even shade - new work (three or more coats)
Making of bund wall with HDPE cement bags filled with stone dust/quary rubbish for discharge regulation, breach closing / diversion arrangement. The rate includes the cost of empty HDPE bags, cost of stone dust, labour charges for filling the bags and placing in position of its purpose in or under foul conditions etc., complete as directed by the Engineer-in-charges.
A Patchaiyappan
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .