NIT No GE/ND-64/2025-26

Amount

B&R PORTION: M&L for Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

Dismantling of floor of size approximately 3.91 sqm for EWC water closet and removing out the cinder/concrete from sunken portion, grinding any sharp edges etc complete all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (f) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and including vertical portion of sunken and nothing extra shall be paid on this account. (g) 72 hrs Ponding test shall be carried out for sunken treatment before payment.

Demolition of cement concrete of any description and in any position, provided for and removing rubbish out of MoD land complete all as specified and directed.

M&L for providing 75 mm thick cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in top surface of floor with and including use and waste of form work and to divide the area in panels and finishing the surface broom finish complete all as specified and directed.

S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 15 mm bore GI tubings complete all as specified and directed.

S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 25 mm bore GI tubings complete all as specified and directed.

S&F in repair medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 40 mm bore GI tubings complete all as specified and directed.

M&L for cutting chases on brick or concrete surface for concealed water tubing or girth n.exc 10cm including making good of disturved surfaces with PCC 1:2:4 type B0 using 12.5 mm graded aggregate complete all as specified and directed.

S&F, in repair, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed for 25mm dia pipe (ISI Marked) complete all as specified and directed.

All as per item No 09.00 above but for 40mm dia pipe complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed, 110 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed, 75 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) bends, tee, trap, multy trap, Y bend, L bend, cowl, legs, 45 degree bend and shoes or similar type joint fixing of any radius of 110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) bends, tee, trap, multy trap, Y bend, L bend, cowl, legs, 45 degree bend and shoes or similar type joint fixing of any radius of 75 mm bore complete all as specified and directed.

S&F in repair tile Insert Shower Drain Channel 24 x 3 Inches)Trap complete all as specified and directed.

S&F in repair Square 150x150mm 304-Grade Floor Drain with Collar, Hinge or without hige top openable with Cockroach Trap complete all as specified and directed.

M&L for Udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, riser/skirting, jambs, pillars, window cills, and like including including 20mm thick screed bed in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounded edges with shade of Udaipur green complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete including demolition complete all as specified and directed.

M&L for super gloss decorative coloured (light and dark colour) walls tiles of size 600x1200x10mm mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed.

M&L for Vitrified matt finished floor tiles light/darkshade 10 mm thick (square/ rectangular) polished, area of each tiles 600x600mm set in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick Screed bed in cment mortar 1:6 or bedding layer of mortar for laying floor finishes complete all as specified and directed.

M&L for Vitrified Ceramic tiles in light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per Item No 21.00 above but in vertical surface as in riser of steps, skirting, dado and pillars over 10mm thick back coat in CM 1:4 complete all as specified and directed.

S&F bath room vanity unit of overall size 600x450x650 (approx) with multiple cabins with outside openable two shutter made of water proof coating /items/ with two nos of 100mm stainless steel handle with hinges and auto closing and 16-18mm thick black polish granite with front and back side 12mm projection or as directed at site suitable hole for wash basin fixing complete all as specified and directed.

S&F in repair Table Top while ceramic basin of Size: approx 52x42x15 cm table mouted type including cuplink with stainless steel bottle trap of 32mm size with 250mm long (Make Jaquar, Hindware,Kohler) to fix on stone base and all fittings to proper functional condtion complete all as specified and directed. Make: Jaquar Cat Part No JDS-WHM-25907N/ Hindware cat Part No 91090/ CERA Cat Part No S2020153/ Kohler Cat Part No K-31459IN-0

S&F in repair Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, including Exposed and Concealed Part (diverter) Cartridge Sleeve, Wall Flange, Nipple & Spout suitable for basin including all fittings complete all as specified and directed. Make: Jaquar cat part No OPP-CHR-15233NKPMM & ALD-235N/ Kohler Cat Part No K-22540IN-4ND-CP/ Hindware Cat Part No F570029CP/ CERA Cat Part No F1023474 and F4065103

S&F in repair 3 in 1 concealed single lever shower mixer, Shower System, 300mm Shower with arm, hand shower 1m to 1.2m connection and one spout with 10 layer surface finished, Shower System owns a modern and stylish look. Excellent plating technology prevents the coating from falling off, after a long time use still keep the surface smooth and clean will all connected items as specified by manufacture complete all as specified and directed. Make: Jaquar Cat Part No KUP-CHR-35125PM/ Hindware Cat Part No F570022CP/ KOHLER Cat Part No K-98754IN-4-CP/ CEARA cat Part No F1015403

S&F in repair 5mm thick modern mirror fixed on decorative PVC cabinet with border design suitable for wash basin cabinet with fitted with LED Front and Backlight, Stepless Dimmable Wall Mirrors with Anti-Fog, Shatter-Proof, Memory, 3 Colors, Double LED Vanity Mirror with touch off/on switch in one mirror including all fixing arrangement complete all as specified and directed.

S&F in repair two way Bib tab (spout) while with Wall Flange complete all as specified and directed. Make: Jaquar Cat Part No No OPP-CHR-15041PM/ Hindware Cat Part No F320005/ KOHLER Cat Part No : K-16093IN-4-CP/ CERA Cat No F1021163

S&F in repair Angular Stop Cock with Wall Flange while complete all as specified and directed. Make: Jaquar Cat Part No OPP-CHR-15053PM/ Hindware Cat Part No F570043CP/ KOHLER Cat Part No 11568IN-7BCP/ CERA CAT Part NO F1015201

S&F fancy type stainless steel towel rack size 600mm X 300mm including a pair of brass bracket complete all as specified and directed. Make: KOHLER Cat Part No K-25066IN-CP/ Jaquar Cat Part No ACN-CHR-1181S/ Hindware Cat Part No F580008CP/ Cera Cat No. F5011101CH

S&F Wall Mount Soap Dispenser frosted glass container and stainless steel holder complete all as specified and directed. Make: Cera CAT Part No F5015111CH/ Hindware cat Part No F102018CP/ Jaguar Cat Part No ACN-CHR-1135N

S&F Wall Mount Tumbler Holder frosted glass container and stainless steel holder complete all as specified and directed. Make: Cera CAT Part No F5014107CH/ Hindware cat Part No F580001CP/ Kohler Cat Part No 25074IN-CP

S&F in repair Vitreous China rimless wash down water closet pan single piece symphonic action , white, including soft close sheet cover of closed pattern with flat bottom complete all as specified and directed. Make: Hindware Cat part No 92573/ Jaquar Cat Part No WC OPS-WHT-15853S300UF/ Kohlar Cat Part No ‎77739T-SL-0/ Cera cat No A1014110

S&F in repair brass chromium plated toilet paper holder, complete all as specified and directed. Make: Jaquar Cat Part No ACN-1151N/ Kohler Cat Part No 5633IN/ Hindware cat Part No F880003CP/ CERA Cat Part No F5002110

S&F in repair, ABS body Health Faucet including flexible pipe of 15 mm bore and min 1.00M long with and including 15 mm bore complete all as specified and directed. Make: Jaquar Cat Part No ALD-CHR-573/ Hindware cat Part No F160192CP/ KOHLER Cat Part No 12927IN-CP/ CERA Cat Part No F8030107AB

S&F 12mm thick toughened desing/frosted glass as approved with SS 1.8mm thick matalic frame work for partition including one top hang sliding door with all fittings such as handle, roller, hinge etc and fixing with SS screw etc and all joints shall be filled with silicon/appoxy as per direction complete all as specified and directed.

S&F in repairs elegent Plantex Make Up Mirror/Shaving Mirror/Zoom Mirror for Bathroom/Stainless Steel Brass Two-Sided 360° Swivel Mirror/Magnifying Mirror with Adjustable Frame/Rectangular (8 Inches/Chrome) complete all as specified and directed. Maek : Hindware, Jaquar or Kohler

S&F in repair fancy type stainless steel towel rail of 600mm length complete all as specified and directed. Make: Hindware, Jaquar, CERA or Kohler

S&F in repair fancy type brass chromium plated soap dish, complete all as specified and directed. Make: CERA cat part No F5004106/ Prayag Cat Part No BA15S/ Somany Cat Part No 231105

S&F in repairs Good quality Connection pipe (PVC) 15 mm dia and 450/600mm long complete all as specified and directed.

Taking down chowkhats or frame not exc 1.50 sqm Each with shutter (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm Each with shutter (without taking off shutters from the frame) complete all as specified and directed by Engg in charge.

S&F factory made single extruded WPC (Wood polymer composite) soild door/window/ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/ rice husk/ wheat husk) and nontoxic additives (max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge complete all as specified and directed. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineering- Charge complete all as specified and directed. Note: stainless steel butt hinges shall be paid separately

M&L for Cutting holes in bricks walls built in cement mortar or cement lime mortar or stone walls built in lime mortar for inserting hold fasts and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-I exc. half brick but not exc one brick complete all as specified and directed by Engg in charge.

S&F 100mm size butt hinges stainless steel of 304 grade complete all as specified and directed.

S&F stainless steel 60mm Iron Five Pin Economy Cylindrical Lock keyless round neck suitable for washroom, kitchen, cub board with all fixing ss screw or material (Make : Harrison H-0504 /Godrej Cat No 5805/Dorset Cat No MP 360) complete all as specified and directed by Engineer-in-Charge.

S&F factory made uPVC white colour fixed glazed window/ventilator made of (small series) with one provn for exhaust fan frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, including grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate. Distance between bars should not be more than 12cm c/c. Total grill unit shall be powder coated and fixed to window frame with screwall complete as per approved drawing & direction of Engineer-in-Charge.

Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick ready mix plaster including finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5 mm thick ready mix plaster on ceiling including finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Preparation of new plastered surface and applying one & more coat of white putty min 1 mm thick on wall surfaces over a coat of chalk whiting priming over tow coat of disteemper oil emulsion complete all as specified and directed.

S&F in repair rotational moulded polythene water storage tanks in triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs including dismantling of old PVC water tank and making connection with fitting for inlet & outlet pipe complete all as specified and directed.

Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipe etc for exc or including 500 ltr to 1000 ltr capacity of tanks complete all as specified and directed.

M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and directed by Engg in charge.

S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm dia complete all as specified and directed.

S&F PVC design Panel minimum 3-5mm thick consist of 40% PVC which is further hot stamped to give aesthetic look, Waterproof, Termite Proof, Energy Efficient, Ready, Fire Resistant, Light reflective easy to clean and wash, Safe and environmentally healthy etc and customised designs as per site requirement and directed by GE including connecting/perimeter bedding fixing on wal to proper anchoring PVC wall/ceiling panel also suitable for holding ceiling light/LED stip of any shape and size complete all as specified and directed. Note : Measurement shall be considered as plan area only. Make : Prominent, Rajshree, Ekra Decor, Metroc

S&F PVC 10-12mm thick soild Wall/ceiling laminated panel/board over 1mm thick UV sheet fixed with adhesive of multi colour as directed by engr in charge over a 25x50 wood frame @ max 1.2 mtr C/C distance panel suitably placed in wall/ceiling with furring channel grid @ specing 300mm c/c fied to wall/celing with ss screw and plug complete all as specified and as directed.

S&F PVC fluted Panel minimum 12mm thick consist of 40% PVC which is further hot stamped to give aesthetic and designer look Characteristics: Attractive, Strong, Waterproof, Termite Proof, Energy Efficient, Ready Easy to install Durable, Low Maintenance, Multiple designs, Fire Resistant, Light reflective easy to clean and wash, Safe and environmentally healthy etc and customised designs as per site requirement and directed by GE including connecting/perimeter bedding fixing on wall/ceiling to proper anchoring PVC wall/ceiling panel also suitable for holding ceiling light/LED stip of any shape and size complete all as specified and directed by Engg in charge Note : Measurement shall be considered as plan area only. Make : Prominent, Rajshree, Ekra Decor, Metroc

E&M PORTION: Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fixture and fittings such as switches, light fittings,ceiling rose, pendent holders, bell, regulators and socket,light fittings etc .removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan point controlled by one no, one way 5 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

All as per item No 61.00 above but One three pin socket outlet 5 amps point controlled by one no, one way switch on independent board complete all as specified and directed.

All as per item No 61.00 above but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.

S&F in repair modular switch 230/250 volts grade one way SP 6 Amp rating complete all as specified and directed. Make: Legrand Cat Part No 573400/ Havells Cat Part No ACNSXXE101/ Schneider Cat Part No X1001WH.

S&F in repair modular switch 230/250 volts grade one way SP 16 Amp rating complete all as specified and directed. Make: Legrand Cat Part No 573410/ Havells Cat Part No ACNSXXE161/ Schneider Cat Part No X1101WH

S&F in repair modular socket out let shuttered type flush mounting type, 230/250 volts grade 2/3 pin 6 Amp combined 2 module type complete all as specified and directed. Legrand.Cat Part No 573470, or equivalent model in Havells -ACAKPXW063, Schneider-X2005WH

S&F in repair modular socket out let shuttered type flush mounting type, 230/250 volts grade 2/3 pin 16 Amp combined 2 module type complete all as specified and directed. Make: Legrand Cat Part No 573471/ Havells Cat Part No ACAKPXW163/ Schneider Cat Part No X2106WH

S&F in repair ceiling rose 3 phase, PVC, polycarbonated, isolated body ISI marked complete all as specified and directed.

S&F in repair modular MCB protected socket made of PVC with plug and socket 20 Amp with one mini MCB single pole, 20 Amp 240 volts complete all as specified and directed. Make: Havells Cat Part No DHFNCSPA016 or equivalent in Legrand/ Schneider

S&F in replacment of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW, capacity 25 litre, BEE 5 star rated including all acceessories such as safety valve, thermostate, NRV, connection pieces etc complete all as specified and directed. Make: Bajaj Armour series Pentacle/ Havells Adonia Spin/ Crompton Solarium Care Note: Old unsv item shall be deposited in MES store yard.

S&F LED downlighter circular type 10 watt, 220 volts AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Orient/ Bajaj/ Crompton/ Havells/ Philips/ Polycab

S&F in repair submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLSH type, 1100 volts grade 2 x 4 sqmm complete drawn in existing conduit along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- New conduit of suitable size with connected fitting will be laid if there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes including making good to disturbed surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates. Make: RR Kabel/ Polycab/ Havells/ KEI/ Gloster/ Finolex

S&F aesthetically designed muziris decorative warm white LED picture/ mirror light of 8-10 watt, PF>0.95, min efficiency 100 lumen/ watt, IP20 rating CCT 3000K fixture with bronze finish for superior fell complete all as specified and directed. Make: Bajaj/ Crompton/ Philips

S&F in replacement exhaust fan AC single phase 230/240 volts of size 250mm sweep 1200 RPM Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion resistant, powder coated metallic finish including louver complete all as specified and directed. Note: Old unsv items to be deposited in MES store yard Make: Usha style name modern Crisp Air VX/ Bajaj maxima 250/ Havells Venti air DX Note: (a) Srl Item No 05.00, 06.00, 11.00, 12.00,15.00 to 17.00, 19.00 to 26.00, 28.00 to 37.00, 43.00, 44.00, 47.00, 48.00, 55.00, 57.00, 59.00, 61.00, 64.00, 70.00 to 72.00 & 74.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.

Ex Serviceman Enterprises (BID ID -3408866)

M/S MSD & Associate (BID ID -3411673)

BEHAL TRADERS (BID ID -3418082)

Vee em Traders (BID ID -3411712)