SPECIAL REPAIR TO COMPOUND WALL AT FORT AREA NAGPUR AND PROVN OF HARDSTANDING INCL PLATFORMS AT ARO GATE, NAGPUR UNDER GE KAMPTEE

Amount

Surface dressing n.exc 15 cm deep in soft /loose soil including Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth for foundation etc, n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed.

Material and labour for cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed.

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and as directed.

Demolition of reinforced cement concrete slabs etc in ground floor and paving n.exc 15 cm thick (below or above ground level) complete all as specified and as directed.

M&L for brickwork with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brickwork with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 but except brick complete all as specified and as directed.

Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and as directed.

M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20mm graded aggregate) in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for Form work to side of concrete in foundations, footing bases, base of columns, side and soffits of plinth beam and simillar work complete all as specified and as directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc complete all as specified and as directed.

M&L Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specified and as directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and apply two coat of cement base paint over a coat of primer complete all as specified and as directed.

M&L for Preparing Old painted surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (annealed) wire not less than 0.90mm dia complete all as specified and as directed.

S&F mild steel TMT bars 8 to 10 mm dia a as in stirrups, spacers and binders complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1 :6 complete all as specified and as directed.

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platforms, and other similar situations complete all as specified and as directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade ® with Grey cement and pigment complete all as specified and as directed.

Supply only river bed fine sand for screed bed min 25mm thick for paving flooring complete all as specified and as directed.

M&L for plain cement concrete Type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) in roof kerbs, mud stops, rounded or chamfered on edges, as coping complete all as specified and as directed.

Dismantling of wrought iron or MS work of any description complete all as specified and as directed.

Dismantling of GI barbed wire fencings fixed in RCC/Steel fencing posts complete all as specified and directed.

Supply and fixing Mild steel iron straps/posts for securing bolts posts and strut in fencing including cutting drilling holes notching for wire etc flat iron fillet and similar work confirming to Fe 410-O or Fe 310-O complete all as specified and as directed.

Supply and fixing for GI 2 standed barbed wire2.24mm dia wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire. staples or steel pins etc as directed (Each line wire to be measured) complete all as specified and as directed.

Supply and fixing in repairs for concertina coil 2.64mm dia having a core wire high carbon spacing steel of high tensile strength as per grade of IS-4454 (Pt-I) with a low carbon steel strip punched tape 19mm wide, 0.5mm thick and series of knife edge sharp barbs/blades @ 25mm centre to centre punched all along the length on both the sides of strips at regular interval confirming to IS-513 complete all as specified and as directed.

M & L for PCC type C-2 1:3:6 (40 mm graded aggregate) as in foundation, filling and mass-concrete and like filling in fencing post complete all as specified and as directed.

M&L for preparation of new untreated surfaces of steel of any description exc 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Removing of vegetation growth, bushed including taking out from fencings etc. and removing the rubbish n exc. 50 m complete all as specified and as directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 40,018.00]

NORTH INDIA PEST CONTROL (BID ID -3493413)

SHIV SHANKAR MISHRA (BID ID -3492604)

NIHAL ENTERPRISES (BID ID -3492934)