Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.4 L
Closing Date
9 Sept 2026, 2:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
BUILDING
14 conditions · 3 needing a document upload
For works costing more than Rs.50 Lakhs:The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less; where V = Advertised value of the tender in crores of Rupees. N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Non submission of the above,the offer will be summarily rejected.(Ref : Advance Correction Slip No.1 dt:14/07/2022 to IRSGCC- 2022 ).
As per Clause 10.1 of Part-I of IRSGCC-April 2022:The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value ofthe tender. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Eligibility criteria for single similar work previously executed : Any civil engineering work except track work / transportation.
51 conditions · 8 needing a document upload
Whether required test certificates/samples, if any have been uploaded?
Tenderers are requested to ensure the uploading of mandatory documents under the relevant tabs as per check list and put(tick) mark wherever applicable as per CE/Works/Chennai letter No.W.496/Tender policy dt.03.07.2023. The check list is available under DOCUMENTS tab. The check list is only exhaustive. Tenderer should ensure that all the documents required as per relevant clauses are uploaded. The mere submission of documents mentioned in the check list alone will not qualify for the eligibility of the tender.
Multiple L-1 :- In case of more than one L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and the current financial year up to the date of opening of tender may be selected for award. Railway reserves the right and may seek the above details within specified period, if not submitted by the tenderers along with the bid.
The contractor should ensure that the staff employed are physically fit, with a sound mind and of good character. To this effect, necessary police clearance certificate should be obtained from local police authorities before the contractor's staff are put into service. This will be in accordance with the Railway Board Letter No. 2020/Sec(CCB)/45/50/Misc Dt.03.02.2020. Refer Annexure I & II.
Advance Correction Slip No.11 to the Indian Railway Standard General Conditions of Contract (April 2022) has been incorporated and copy uploaded for reference.
Bidders are requested to submit the Performance Guarantee (PG) strictly in accordance with the new prescribed format and within the stipulated timeline to avoid any delay in processing. (Copy enclosed)
Maintenance period of four (4) years shall be stipulated for works involving construction of ROB/RUB/LHS, new Rail Bridges/ROR, and rebuilding of existing bridges, to ensure quality and standardization across Zonal Railways; whereas, for construction of quarters and other buildings, a maintenance period of up to three (3) years shall be applicable as per Dy. CVO/Engg letter No. VO/E/Sys.Imp dated 17/02/2026.
All the contracts on works/goods/services will be subject to the new GST act as applicable from time to time. Contractors have to register themselves with GST authorities and to furnish the GST registration number in order to process the bills from 01.07.2017
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Deployment Of Qualified Engineers At Work Sites By The Contractor. The contractor shall also employ Qualified Graduate Engineer or Qualified Diploma Holder Engineer, based on value of contract, as may be prescribed by the Ministry of Railways through separate instructions from time to time.(As per RB ltr no.2012/CE-I/CT/O/20 dt:10.05.2013)
One qualified Graduate Engineer when the cost of the work is Rs. 200 lakhs and above.
One qualified Diploma holder Engineer when the cost of the work to be executed is more than Rs.25 lakhs but less than Rs.200 lakhs.
In case the contractor fails to employ the technical staff as aforesaid, he shall be liable to pay a an amount of Rs.40,000/ (Rupees Forty thousand) for each month or part thereof for the default incase of Graduate Engineer and Rs.25,000/- (Rupees Twenty five thousand) for each month or part thereof for the default in case of Diploma holder (Engineer)
I/WE also hereby agree to abide by the INDIAN RAILWAY GENERAL CONDITIONS OF CONTRACT- April 2022, with all correction slips up to date and to carry out the works accordingly.
Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.
I/We also agree to keep this tender open for acceptance for a period of 60 days from the date fixed for opening the same
I/We offer to do the work for DRM/W/O/SA, at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respects within the period of completion stipulated in the tender document, from the date of issue of letter of acceptance of the tender. The Bid security shall stand forfeited without prejudice to any other right or remedies in case my/our Tender is accepted and if : (a) I/We do not execute the contract documents as stipulated in performance guarantee clause of GCC as detailed in general instructions. (b) I/We do not commence the work within seven days after receipt of orders to that effect.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking
However, Railways shall have the right to incorporate any such condition quoted by us, in the contract, at their discretion, if contract is placed on us.
I/We have read the various conditions attached/ referred to in this tender document, and agree to abide by the said conditions.
A tenderer claiming credentials as an individual for their share in a partnership firm, has to submit both the deeds of (i) partnership deed, showing % of their share and (ii) retirement deed from the partnership firm(or) deed showing the closure of business operations of the partnership firm, as applicable. Failing to submit the above deeds, the offer of the tenderer will be summarily rejected.
The tenderer shall clearly specify whether the tender is submitted on his Own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) I Registered Society/ Registered Trust / Hindu Undivided Family( HUF) / Limited Liability Partnership (LLP) etc. , The tenderer(s) shall enclose the attested copies of the requisite documents (including Power of Attorney, if opted) for constitution of their concern as per Cl.14 of GCC-Part-l and as per a)Clause 17 of GCC - Part-1, for JV b)Clause 18 of GCC - Part-I, for Partnership Firm.
Copies of the following documents are to be uploaded: (i) Details such as Name of the tenderer/ Contractor, Validity of DSC, Complete address with pin code, contact number (ii) Copy of PAN card (iii) Copy of GSTIN card.
A copy of NEFT form duly filled in the details as necessary to be uploaded. (The Tenderer/Contractor not having NEFT form may down load the empty NEFT form available in Document site)
Submission of physically signed Annexure-V by the tenderer is discontinued vide Rly Bd letter dt:14/05/2024 (Uploaded)
Submission of Annexure-V(A) under Document Verification Certificate. In case of other than company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) /Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc., as the case my be. Non-submission of the above Certificate(s) by the bidder shall result in summarily rejection of his/their bid
SW.I: ED- Creation of Stores Building for LHB Maintenance at Pitline. SW.II: Advanced Trip maintenance facilities at ELS/ED/SA/SR. (Heavy Duty Re-Flooring at Medium Lifting Bay (TM Section) of size 76 m x 13 m))
SA-OT-09-2026-06~SR
SA-OT-09-2026-06
Open
Works - General
9 Months
Salem, Tamil Nadu
₹0
₹2.4 L
14 Aug 2026
14 Aug 2026
26 Aug 2026
97 items across 4 schedules · ₹46,50,850.55 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 60 | 205.45 | 12,327 |
| 2 | Ordinary rock | cum | 60 | 523.5 | 31,410 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 160 | 253.95 | 40,632 |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 15 | 6,326.05 | 94,890.75 |
| 5 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm | 18 | 370.85 | 6,675.3 |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 35 | 307.95 | 10,778.25 |
| 7 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 350 | 766.55 | 2,68,292.5 |
| 8 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 36.45 | 608.35 | 22,174.36 |
| 9 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 243 | 804.25 | 1,95,432.75 |
| 10 | Stairs, (excluding landings) except spiral- staircases | Sqm | 75 | 657.75 | 49,331.25 |
| 11 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 40 | 8,683.8 | 3,47,352 |
| 12 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 120 | 10,306.2 | 12,36,744 |
| 13 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 52.8 | 688.45 | 36,350.16 |
| 14 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 30 | 6,658.25 | 1,99,747.5 |
| 15 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 180 | 8,288.35 | 14,91,903 |
| 16 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 60 | 1,018.05 | 61,083 |
| 17 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | Sqm | 60 | 86.45 | 5,187 |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 30 | 1,063.45 | 31,903.5 |
| 19 | Second class teak wood | cum | 2 | 1,31,576.95 | 2,63,153.9 |
| 20 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading | Sqm | 20 | 1,521.6 | 30,432 |
| 21 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 20 | 3,086.1 | 61,722 |
| 22 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 400 | 197.7 | 79,080 |
| 23 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | Each | 15 | 194.35 | 2,915.25 |
| 24 | 250x10 mm | Each | 15 | 374.35 | 5,615.25 |
| 25 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 15 | 723.8 | 10,857 |
| 26 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 15 | 1,025.65 | 15,384.75 |
| 27 | 250x16 mm | Each | 10 | 234.9 | 2,349 |
| 28 | 250x10 mm | Each | 10 | 104.4 | 1,044 |
| 29 | 100x10 mm | Each | 10 | 58.65 | 586.5 |
| 30 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. | Each | 15 | 89.9 | 1,348.5 |
| 31 | Single rubber stopper | Each | 10 | 35.5 | 355 |
| 32 | Triple strip vertical type | Each | 4 | 44.85 | 179.4 |
| 33 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre | 10 | 408.25 | 4,082.5 |
| 34 | 30 mm thick pre laminated PVC door shutters | Sqm | 15 | 2,455.1 | 36,826.5 |
| 35 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 4500 | 111.95 | 5,03,775 |
| 36 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | Kg | 1500 | 102.25 | 1,53,375 |
| 37 | Size of Tile 600x600 mm | Sqm | 300 | 1,416.65 | 4,24,995 |
| 38 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. | Sqm | 300 | 620 | 1,86,000 |
| 39 | 75 mm diameter | Metre | 10 | 213 | 2,130 |
| 40 | 110 mm diameter | Metre | 10 | 319.75 | 3,197.5 |
| 41 | 75 mm | Each | 10 | 79.8 | 798 |
| 42 | 110 mm | Each | 5 | 119.95 | 599.75 |
| 43 | 75x75x75 mm | Each | 5 | 141.55 | 707.75 |
| 44 | 110x110x110 mm | Each | 5 | 205.45 | 1,027.25 |
| 45 | 75 mm bend | Each | 5 | 91.8 | 459 |
| 46 | 110 mm bend | Each | 5 | 132 | 660 |
| 47 | 75 mm Shoe | Each | 5 | 81.1 | 405.5 |
| 48 | 110 mm Shoe | Each | 5 | 115.95 | 579.75 |
| 49 | 75 mm | Each | 5 | 310.85 | 1,554.25 |
| 50 | 110 mm | Each | 5 | 309.5 | 1,547.5 |
| 51 | 1:6 (1 cement: 6 fine sand) | Sqm | 300 | 282 | 84,600 |
| 52 | 1:6 (1 cement: 6 fine sand) | Sqm | 80 | 382.1 | 30,568 |
| 53 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 450 | 214.3 | 96,435 |
| 54 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | Sqm | 500 | 166.85 | 83,425 |
| 55 | Two or more coats on new work | Sqm | 500 | 137.85 | 68,925 |
| 56 | Two or more coats on new work | Sqm | 75 | 131.45 | 9,858.75 |
| 57 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 2 | 5,781.35 | 11,562.7 |
| 58 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 2 | 5,540.55 | 11,081.1 |
| 59 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern | Each | 2 | 7,752.6 | 15,505.2 |
| 60 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 4 | 299.35 | 1,197.4 |
| 61 | 10 litre capacity - White | Each | 2 | 1,023.05 | 2,046.1 |
| 62 | Circular shape 450 mm dia | Each | 2 | 1,248.6 | 2,497.2 |
| 63 | 25 mm nominal dia Pipes | Metre | 50 | 408.55 | 20,427.5 |
| 64 | 25 mm dia nominal bore | Metre | 40 | 417.95 | 16,718 |
| 65 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). | Each | 3 | 670.15 | 2,010.45 |
| 66 | 20 mm nominal bore | Each | 2 | 327.95 | 655.9 |
| 67 | 20 mm nominal bore | Each | 2 | 327.95 | 655.9 |
| 68 | 20 mm nominal bore | Each | 4 | 397.45 | 1,589.8 |
| 69 | Horizontal | Each | 4 | 506.65 | 2,026.6 |
| 70 | With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 | Each | 4 | 24,388.85 | 97,555.4 |
| 71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 2000 | 9.7 | 19,400 |
| 72 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 4 | 109.85 | 439.4 |
| 73 | 100 mm nominal dia | Each | 4 | 33.2 | 132.8 |
| 74 | 50 mm dia | Each | 2 | 5,171.75 | 10,343.5 |
| 75 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 5 | 2,453.55 | 12,267.75 |
| 76 | 250 mm dia. R.C.C. pipe | Metre | 75 | 811.15 | 60,836.25 |
| 77 | With Sewer bricks conforming to IS : 4885 | Each | 10 | 24,077.3 | 2,40,773 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SPECIFICATIONFORBUILDINGSBRIDGEWORKSDEC2025.pdf
ATTACHMENT
ACS112026_compressed.pdf
ATTACHMENT
NewFormatofBG.pdf
ATTACHMENT
ANNEXUREIIIFORPOLICEVERIFICATION.pdf
ATTACHMENT
ACS1to10.pdf
ATTACHMENT
RBCECEICTImplementationofContractoremb.pdf
ATTACHMENT
ANNEXUREVVAVIAVIB.pdf
ATTACHMENT
GCCApril2022NEW.pdf
ATTACHMENT
INSTRUCTIONSTOTHETENDERER.pdf
ATTACHMENT
ProcedureforLetterofCredit.pdf
ATTACHMENT
Workonhanddetails.pdf
ATTACHMENT
SafetyprecautionstobeadoptedwhileworkinginElectrifiedArea.pdf
ATTACHMENT
Splconditionsofcontractformovementofvehicle.pdf
ATTACHMENT
CheckListandNEFTform.pdf
ATTACHMENT
RlyBdletterClarificationofAnnexureV.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].