Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹21.8 L
EMD Value
₹44,000
Closing Date
20 Oct 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SO-1 (Works) HQ Inspector General Assam Rifles(Nor
SO-1 (Works), HQ IGAR (N), C/O 99 APO
Balance works for Provn of storage accn at Bn HQ 16 Assam Rifles Now 1 Assam Rifles at Kohima under Risk Cost
2022_ARMHA_715847_1
VIII.11001/Engr/1811/2022-23
Open Tender
Civil Works
Works
180 days
Kohima
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
SO1 (Wks), HQ IGAR (N), C/O 99 APO of SBI under He
₹44,000
Yes
30 Nov 2022
1 Oct 2022
21 Oct 2022
1 Oct 2022
20 Oct 2022
1 Oct 2022
1 Oct 2022 - 20 Oct 2022
Amount
SCHEDULE ‘A’ PART-I
Materials & Labours for 15 mm thick Cement plastering in CM 1:4 on external walls
Materials & Labours for 12 mm thick Cement plastering in CM 1:6 on internal walls
Materials & Labours for 15 mm thick Cement plastering with floating coat in CM 1:4 for stair
Cement Concrete flooring 1:2:4, 40 mm thick using 20 mm graded stone aggregate, finished with a floating coat of neat cement slurry but excluding the cost of nosing of steps etc complete (G/F and F/F)
Materials & Labours for pressed steel chawkhat for doors with one or more rebates including necessary fittings, angle iron 40x40x6mm size
Providing and fixing ISI marked Flush door shutters conforming to IS:2202(Part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, 35 mm thick including ISI marked stainless steel butt hinges with necessary screws.
Supply and fixing Steel ventilator with centre /side/top hung shutter of size 0.60x0.60 m made out of angle iron 40x25x4mm size.
Supply and fixing aluminium anodised barrel tower bolts 150 mm long
Supply and fixing Butt hinges 100 mm long
Supply and fixing extructed aluminium alloy handle 125 mm long
Supply and fixing aluminium alloy sliding door bolts 250 mm long
Materials and labours for two coat of synthetic enemel paint over a coat of primer on doors and ventilators surfaces.
Supply and fixing sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 sqm in each pane( Frosted one side)
Materials and labours for two coats of oil bound washable distemper over a coat of primer.
Materials and labours for two coats of weather coat (External) paint over a coat of primer on external walls.
Materials and labours for frames work such as MS square bars/MS pipe in Verandha Railing conforming to Fe-410-0 of Fe-310-0
Providing and fixing MS railing for stair with MS square bar/ MS pipe and fixed to flat iron
Materials and labours for two coat of synthetic enemel paint over a coat of primer on railing.
Steel work in built up tubular (Round hollow tubes medium weight ) trusses etc including cutting, hoisting, fixing in position and applying a ptiming coat of approved steel primer , including welding and bolted with special shaped washers etc complete . Hot finished welded type tubes.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
Fixing only (MD) precoated galvanised iron profile sheets (Size , shape and pitch of corrugation as approved by Engineer in charge) 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grms per sqm as per IS: 277 , in 240 mpa steel grade , 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard flim of 25 microms minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as diredted by Engineer in charge. The sheet shall be fixed using self drilling/ self tapping screws of size 5.5x55 mm with FPDM seal, complete upto any pitch in horizontal/vertical or curved surface, excluding the cost of purlins, rafter and trusses and including cutting to size and shape whereever required
M/s K B Enterprises
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .